How do I clean my computer mouse correctly?

If you notice that your computer mouse is working poorly or not working at all, then you do not need to buy a new mouse. The reason for this, most likely, is that it has become dirty. Cleaning the mouse will fix this problem.

The first step is to determine the type of your mouse. Turn your mouse upside down. If you see a ball, then you have a ball mouse. If you can see the lens, you have an optical or laser mouse. There are different cleaning methods for each type of mouse.

An optical or laser mouse does not need to be cleaned as often as a ballpoint mouse, but it still needs to be done from time to time. If you do not clean its surface, then the body will begin to blacken. So, clean it at least once a month with a damp cloth. The lens rarely gets dirty, but if this happens, take a soft cloth or cotton swab, moisten it with alcohol or window cleaner and gently wipe the lens.

The ballpoint mouse needs to be cleaned frequently, so please read the cleaning procedure carefully. The more the ball gets dirty, the harder it becomes to move the cursor around the screen. If in order to move the cursor from one corner of the screen to another you need to raise and lower the mouse several times, then it's time to clean it.

It is not necessary to disconnect the mouse from the computer during cleaning, but do not forget to close all running programs so that you do not accidentally click or ruin something. If you do decide to disconnect the mouse, be sure to turn off your computer first. Never disconnect the mouse from the computer while it is running. This could damage the motherboard.

Flip your ball mouse, you will see a lid that covers the ball. Arrows are drawn on it. With two fingers, lightly press on the cover and unscrew it in the direction of the arrows. Then cover the bottom of the mouse with your hand and flip it over to its starting position. The ball and cap should fall into your hand. If not, shake the mouse slightly.

Wipe off the ball with a damp cloth.

Now look through the hole on the bottom of the mouse. You will see three cutscenes. Use a damp cloth to gently wipe off any dirt. Place the ball back into the hole and close the lid.

Is your mouse still not working well? Try cleaning it again. Doesn't work again? Well, there is no choice, you have to buy a new one.

It is best to clean the surface regularly computer mouse, because if it is clean outside, then it will be cleaner inside.

If the mouse is used by many people (especially if one of them is sick), we recommend that you disinfect its surface before use.

The personal computer helps us day after day. The details in the computer are different, but there is always a computer mouse. If we even, sometimes, clean the keyboard, then we always forget about the mouse. It is believed that the mouse is the most polluted part of the computer. Consider this problem and how to solve it.

When should I clean my mouse?

Watching only the outside and wiping it down won't be enough. Fat deposits stick from the inside. If this continues for a very long time, the cursor on the computer will constantly freeze.

It is necessary to carry out prophylaxis for cleaning the mouse every three months, at least. The duration of this procedure takes no more than a couple of tens of minutes.

1. Optical computer mouse, sometimes called laser.

Let's take a look at what we are using to clean up the mouse. How we will clean it depends on the type. There are two main types in the world, first we will disassemble a laser computer mouse (optical).

We will analyze the method in which we will clean in detail, but first we will decide what kind of inventory will help us with this.

Mouse Dirt Removal Tool

Includes:

• All kinds of sticks.
• Cleansing solutions.
• Sterile wipes.
• Balls.
• Provided carpets.

Most importantly, with these devices we can carry out cleaning without disassembling the device. This saves additional time and effort. The only drawback is the price of such sets. And it must be added that no matter what kit is used, for high-quality cleaning, you still need to disassemble it. This method can be used in companies where the number of equipment is very large.

Handy tools

When you are at home, it is not always possible to use special tools, so we will consider available tools. Let's dwell on this in more detail.

For such actions, we may need:

• Hand-held locksmith tools.
• Alcohol solution.
• Plastic or plastic scraper.
• Tampons are not solid.
• Anything made of cloth.
• Small sticks for cleaning.
• Soap mixture.

2. Let's move on to the mouse with the ball:

1. Turn off the computer immediately. We turn off the device.
2. Disconnect the mouse from the system unit, turn it over.
3. Using the screws, unscrew the bottom, separate the upper surface.
4. You can't do anything rudely. The device should be easily disassembled into two parts.
5. Remember how the cord went through the mouse.
6. We take out the rubber ball that is in contact with the carpet.
7. We wash it and wipe it with an alcohol solution.
8. Thanks to the scraper, we remove the dusty dirt inside.
9. It is very important to pay attention to the rings. Dust removal is only possible mechanically.
10. Solvents with metal and parts of the razor blade must not be used for cleaning. They can damage important parts.
11. We clean the pressure wheel mechanically.
12. After finishing the mechanical cleaning, we degrease the moving parts of the device. To do this, we need alcohol and a soft swab.
13. When cleaning with alcohol, pay attention to the pressure wheel and the cylinder-shaped elements.
14. We wipe the contacts diligently with an alcohol solution.
15. If you degrease, the dust will settle much less.
16. Dip a cotton swab into the alcohol solution and treat the elastic pads on the mouse.
17. The two body parts are also cleaned with alcohol.
18. The mouse must be collected in reverse order... Observe that the computer mouse wire goes into the place we need when connecting the two halves.
19. Tighten the screws and connect the two body parts.

We hope that these simple methods will help you clean your computer mouse at home.

Personal computers have long been impossible to imagine without a keyboard and mouse, which are the main intermediaries in the "communication" between the user and technology. Unfortunately, mice break down and start to junk quite often. The computer mouse can be disassembled and cleaned.

Instructions

Dirt and dust penetrates ball mice best of all, falling under the roller. The cursor begins to twitch when moving, or it may not move at all in any direction. Therefore, it is very important to use the rug and make sure that no dust accumulates on it.

Disconnect the pointing device from the PC, but only when the system unit... The body of the mouse can be cleaned with an ordinary damp cloth and a small amount of liquid soap. But do not try to wash the mouse under running water. True, the case itself after disassembling the optical (namely optical) mouse can be thoroughly rinsed. It's just that mechanical mice also have a microcircuit that cannot always be removed from the case.

Take a small Phillips screwdriver and remove the small screw found in the recess on the bottom of the robot arm. Usually the body is in two parts. There may also be a small latch on the side of the screw. Separate the case gently without using too much force.

If the mouse is optical, you need to gently wipe the glowing red "eye" in its lower part using a match with a cotton swab or an ear stick. You can also use a can of compressed air. Carefully remove the large IC from the optical mouse housing and free the plastic parts from dust, dirt and hair (wool). Remove the rubber-coated ball from the ball mouse and wash it with soap or rubbing alcohol. Pay particular attention to the mouse wheel and its mountings. There, too, dirt often accumulates.

For mechanical removal of dirt, it is better not to use a knife or razor, but to take a small plastic scraper. Scrape off dirt thoroughly with it where possible.

After removing dust and adhering dirt, remove grease from the rotating parts of the arm. This can be done with a soft, lint-free cloth soaked in alcohol. Also, rub all the insides of the mouse with rubbing alcohol to keep dust from accumulating longer.

Now you can assemble the mouse. Put the microcircuit (wheel) back and close the case. See do not pinch the wire. Tighten the screw and consider that the mouse is clean.

Tip added on July 7, 2011 Tip 2: How to clean your mouse When cleaning your mouse, it is important to know that the internal mechanism of both optical and laser models is a fragile and complex mechanism, which must be interacted with carefully and in stages. By following a few simple steps, you can clean the mouse from grease and dust in a quality manner without damaging the mechanism itself.

You will need

• brush, vacuum cleaner, screwdriver.

Instructions

Clean the USB cable of the mouse. If the reason for carrying out these procedures was the computer ignoring the device, then it is quite possible that either the usb-input on the mouse or computer is simply clogged. Bring the hose from the vacuum cleaner to the adapter or computer panel, and using a brush, gently sweep out the accumulated dust in the adapter. If you do not want to connect a vacuum cleaner to this procedure, you can blow through the mechanism yourself.

Unscrew the fasteners from the back of the mouse. If some of the buttons on the mouse body are sticking or not responding, then the problem is most likely in the mouse itself. Therefore, the first step is to dismantle the case and clean the "insides". Be careful with the screws and bolts that you removed from the mouse. They are often lost, it is best to remove them before procedures in a small sachet or simply away from the place of cleaning.

Use cotton swabs to clean the cavity of the mouse. The main epicenters of the accumulation of dirt will be visible to you as soon as you disassemble it. These are interlayers between buttons, flaps and small cracks in the case, which have been accumulating dirt all this time.

Use a soldering iron if necessary. If this or that contact has departed from a strong blow or for other reasons, you just need to return it to its place. The soldering machine will perfectly fit for these needs, however, if it is not there, it is not worth spending money on it. In most cases, it will be cheaper to buy a new mouse.

Helpful Hint Do not sit down at your PC without making sure your hands are clean. This will not only provide comfort while working, but will also allow your equipment to live much longer. Be careful when cleaning the laser mouse. The structure of the laser in it is usually fragile, and the slightest pressure can damage its functionality. Optical and older models are less demanding on the cleaning process. How to clean a mouse - printable version

The personal computer has become a full-fledged and necessary household device for many people in the modern world. Most affordable stationary computers can consist of various components, but they necessarily include control devices: a keyboard and a manipulator, which is often called a "mouse" because of the external resemblance to the rodent of the same name. It is with these devices that the user of a personal computer is most often in contact, and therefore they are the most contaminated and need periodic cleaning.

Unfortunately, few of the personal computer users know how to properly clean these devices. If we even occasionally wipe the keyboard from dust, then the mouse is very often devoid of any hygienic treatment at all. Is this true? How can I clean the mechanical arm to avoid damaging the functional characteristics of the device? Let's figure it out together!

Unbelievable but true!
British scientists conducted a study aimed at identifying the most contaminated object in the office. About one hundred and fifty different things have been studied. Based on the data obtained, the researchers came to the stunning conclusion: the most dangerous object to health in the office is a computer mouse. According to scientists, the degree of contamination of the surface of the product can be comparable to the plaque of bacteria inhabiting about thirty toilet bowls. The main reason for such a deplorable state of a computer mouse is eating in front of a PC monitor. Moreover, according to scientists, few people know how to properly care for a mechanical manipulator.

Methods for cleaning a computer mouse
Before proceeding with the description of the main methods of cleaning "mice", let's decide what type of device we will be considering. There are two main types of computer accessories: optical (or laser) and ball-type. Overwhelming majority modern people currently use optical or laser mice. Obsolete ball products are gradually being ousted from the ranks of the used equipment. Therefore, we will consider cleaning optical mice.

The first method involves removing dirt from the product without opening its case. So, let's start cleaning the manipulator:
The second method of cleaning a computer mouse involves removing the case of the product. When is it necessary? Many PC users resort to this method when the mechanical manipulator starts to work poorly, in other words, "freeze". So, let's decide on the order of actions:
Regular care of a computer mouse will allow you not only to extend the life of a mechanical manipulator, but also to protect yourself from pathogenic bacteria accumulating on the surface of the product.

In modern world Personal Computer became irreplaceable assistant and a friend to many people. Stationary computers can consist of various components, but they necessarily include control devices, which include a keyboard and a manipulator, the so-called mouse. Most often, the user contacts with these devices during work, and if we wipe the keyboard even occasionally, then few know how to clean the mouse from dirt. But it is the mouse, according to British scientists, that is considered the most polluted object in the office and the most dangerous for the user's health, since a lot of bacteria live on its surface. What can we say about the contamination of the "rodent" inside? Today we will tell you how to clean a mouse from a computer so as not to harm the functional characteristics of a mechanical manipulator.

When should I clean my mouse?

No matter how carefully you monitor the cleanliness of the workplace, do not wipe the mat and mouse outside, all the same, dust gets into the inner cavity of the manipulator. And there, along with fatty deposits, dust sticks to the mechanical moving parts of the mouse. In such a situation, sooner or later, the cursor will start to “freeze” on the screen, and you wonder how to clean the mouse from dirt.

To prevent such a situation from happening, periodically, once every three months, take preventive measures to clean the inner cavity of the manipulator. The process itself will take you no more than ten minutes.

Means for cleaning a computer mouse

Methods for cleaning up dirt depend on the type of computer mouse. There are two main types of manipulators:

• Optical (laser) mouse.
• Ballpoint.

We will consider each cleaning method separately, but first we will decide on the means and materials that are needed in the process of work.

Kit for cleaning a mouse from a computer

You can clean the inside of the mouse from dirt using special kits and tools sold in any computer store. Such kits include:

• Various sticks.
• Mouse cleaning fluids.
• Cleaning wipes.
• Balloons.
• Special rugs.

Important! It is very convenient to use all these tools, because in order to clean the manipulator from the inside, you do not need to disassemble it. This makes the cleaning process very fast, easy and simple. The kits are very effective, but there is one drawback - the price is quite high. In addition, it should be noted that no matter what set you use, even the best and most expensive, you can clean the mouse from the inside with high quality only by disassembling it.

Therefore, we recommend using such sets in offices with a dozen devices or in computer labs, since the use of such tools can significantly save time. Read the instructions for use for what and how to do and proceed.

Handy tools

It is irrational to use special kits at home, and they are not always at hand. Therefore, let's take a closer look at how to clean a mouse from a computer at home.

For cleaning activities you will need:

• Crosshead screwdriver.
• Alcohol.
• Plastic or plastic scraper.
• Tampons made of soft, lint-free cloth.
• Textile.
• Cotton swabs for external cleaning.
• Soap solution.

How to clean a ballpoint mouse?

To clean the mouse from the computer, if you are using the simplest ball-point model, proceed as follows:

1. Turn off your computer. Unplug the device to avoid burning the mouse port.
2. Disconnect the mechanical arm from the system unit.
3. Flip the mouse over to see its bottom surface.
4. Use a Phillips screwdriver to unscrew the screws on the bottom of the mouse.
5. Carefully try to separate the case. Do not use brute force as you may break the plastic clip. The case should be separated into two halves without difficulty.

Important! When disassembling the device, pay attention to how the manipulator cord was located; later, during assembly, this may come in handy.

1. Gently pull out the rubber ball that is in contact with the mat.
2. Wash the ball with warm water and soap or wipe with alcohol.
3. Remove dust and dirt inside the mouse with a plastic or plastic scraper.
4. Pay particular attention to the tight mud rings on the perpendicularly spaced cylindrical wheels. Dust and dirt can only be removed mechanically using a plastic scraper.

Important! Never use solvents, metal scrapers, a knife or a razor blade to clean the inside of the manipulator. All of these tools can damage parts of the device.

1. Clean the pressure wheel from the dirt, which, when the mouse is operating, presses the ball against the mat. Carry out the cleaning process in the same way as in the case of cylindrical wheels.
2. After mechanical cleaning and removal of dust deposits, thoroughly degrease all mechanical moving parts of the device. The degreasing process is carried out with alcohol or vodka, using a swab made of soft, lint-free cloth.
3. When cleaning with alcohol, pay special attention to the pressure wheel and cylindrical elements.
4. Thoroughly wipe the keypad contacts with alcohol.
5. Degrease with alcohol and the inner cavity of the mouse so that the dust settles on the parts as little as possible.
6. Dip a cotton swab in alcohol and wipe the elastic pads (feet) of the mouse.
7. Also clean the two halves of the case with alcohol from grease.
8. Assemble the mouse in the reverse order. Make sure that the cable of the manipulator is in the right place when twisting the two halves.
9. Screw in a small screw and connect the two body parts.
10. Dip a dry cloth in alcohol and clean the pointing device cord from the point of connection with the mouse to the connector to the computer.
11. The mouse is ready to use again, connect it to the computer.

Important! Do not use ordinary cotton wool to clean the internal parts, as it leaves behind fluff, which can later become an obstacle to the normal operation of the device and an additional dust collector.

How do I clean my optical mouse?

If optical mouse does not work well, then most likely it needs cleaning. Let's look at two ways to remove dirt from a manipulator.

Method number 1. Without disassembling the case

For the device cleaning procedure you will need:

• Alcohol.
• Toothpicks.
• Lint-free fabric.
• Cotton buds.

Proceed as follows:

1. Disconnect the device from your computer. If the manipulator is connected to USB port, you can do this without even turning off your computer.
2. Flip the mouse over to carefully examine its underside.
3. Dip a cotton swab in alcohol and wipe the rubber feet of the device.
4. Clean the area around the legs with a toothpick. Use a new toothpick for each leg. Perform the procedure carefully, if necessary, use a magnifying glass or lens to effectively remove all impurities.
5. Use a cotton swab to remove dust and debris from the mouse eye. Do not press down on the wand forcibly, so as not to scratch the eye and damage the device.

1. Clean the gaps between the buttons of the device with a toothpick. Do not press too hard to prevent the wooden stick from breaking and ruining the device.
2. Use a toothpick to clean the slots on both sides of the manipulator wheel.
3. Clean the wheel with a toothpick.
4. Clean the surface of the mouse itself with damp wipes or a damp cloth. Be careful not to get moisture inside the device, as this may damage the microcontroller.
5. Set the mouse aside.
6. Dip a cloth in water and wipe down the mouse pad.
7. Place the mouse on the mat and wipe the mouse wire (if available) with a dry cloth and alcohol.
8. Connect your mouse to your computer.

Important! Clean the robot arm at least once a month. If you regularly eat in front of the screen or your children use the mouse, then you need to clean the device much more often.

Method number 2. We disassemble the case

To work you will need:

Step-by-step instruction:

1. Disconnect the mouse from the computer.
2. Wipe the body of the device with a damp cloth.
3. Flip the mouse over to see the back surface.
4. Use a Phillips screwdriver to carefully remove the screw at the base of the device.
5. Inspect all fasteners carefully and unscrew them.

Important! On some models, one screw is in direct line of sight, and a couple is hidden under the Teflon feet or under a sticker.

1. Put all screws in a safe place so that they are not lost during all events.
2. Separate the case carefully. Pay attention to how the cord is located (if there is one), this may come in handy when assembling the device.
3. Remove the large microcircuit from the case and carefully remove with a cotton swab or soft cloth all dust, finest hairs and dirt.

Important! Do not use sharp objects to clean the microcontroller board, otherwise you risk damaging the microcircuit.

As you can see, it is not difficult to clean the mouse from dirt, and if you do it regularly, you will not only extend the life of the manipulator, but also protect yourself from pathogenic viruses and bacteria that “live” both on the surface and inside the device. We hope that the resurrected, recovered and rejuvenated mouse will delight you for a long time with its diligent behavior. Health and good luck to you and the "rodent"!