Legislative base of the Russian Federation. Legislative framework of the Russian Federation Federal statistical observation 4 ter

font size

On the line "Postal address" the name of the constituent entity of the Russian Federation, legal address with zip code; if the actual address does not coincide with the legal address, then the actual mailing address is also indicated. For separate divisions that do not have a legal address, a postal address with a postal code is indicated.

3. A legal entity puts in the code part of the form the code of the All-Russian Classifier of Enterprises and Organizations (OKPO) on the basis of the Notice of assignment of the OKPO code sent (issued) to organizations by the territorial bodies of Rosstat.

For geographically separate subdivisions of a legal entity, an identification number is indicated, which is established by the territorial department of Rosstat at the location of the geographically separate subdivision.

4. Enterprises-consumers, wholesale, intermediary, wholesale and intermediary organizations, organizations leading retail trade fuel, the report must provide data on all fuel actually received and consumed in the reporting year for the needs of the organization, as well as sold to the population or its employees, other organizations, as well as fuel in the balance.

5. Enterprises - consumers of fuel, which are at the same time its producers, in the report according to the form in terms of their own production (production), provide data on the movement of only that amount of fuel that is intended for their own technological needs (including fuel consumption as raw materials for processing into other types fuel and non-fuel products), energy needs, for the operation of their own vehicles, as well as for the sale to the population or their employees. Fuel of our own production, sold legal entities, these enterprises are not reflected in the form. Fuel purchased from other businesses is shown on the form in full.

6. In section 1, in column 3, the entire actual fuel consumption at the enterprise is given, including losses in technological processes, when it is converted into other types of fuel or energy, as well as losses and shortages drawn up by appropriate acts during storage and transportation.

7. From the total consumption (column 3), the fuel consumption data is highlighted as:

a) motor (column 4) - oil products, liquefied and compressed gas used in internal combustion engines - automobile, tractor, agricultural, aircraft engines, engines of sea, river vessels, etc .;

b) as raw materials (column 5) - fuel resources used as raw materials for the production of chemical, petrochemical or other non-fuel products. This column does not reflect the amount of fuel used for the production of other types of fuel, with the exception of coking coal used for the production of coke; fuel peat - for the production of peat briquettes and semi-briquettes;

c) for non-fuel needs (column 6) - fuel resources used as material for non-fuel needs. For example, coal is used as an additive to clay solutions in oil drilling, as well as as a filtering agent; gas injected into the reservoir to maintain reservoir pressure; fuel peat, used as a heat-insulating material and for fertilization; firewood used for the production of container boards; oil used for well flushing; fuel oil used as a lubricant; kerosene used to wash parts, etc.

Data on the consumption of fuel resources used directly as boiler and furnace fuel (in the production of electricity and heat at power plants and boiler houses, to create the required temperature regime in technological processes) are reflected only in column 3.

8. In columns A and D of section 1, the forms for the names of the coals of individual basins and deposits are given in accordance with Appendix No. 1 to the Instructions for filling out the federal statistical observation form No. 4-TER (indicating the N line corresponding to the type of coal).

9. Lines 1165 and 1631 provide data on the consumption of coal in terms of fuel equivalent. Coal is converted into conventional fuel, as a rule, by multiplying the volume of coal in physical terms by its actual thermal equivalent (K), defined as the ratio of the lowest calorific value of the operating state of the fuel to the calorific value of 1 kg of standard fuel, i.e. 7000 kcal / kg. If it is impossible to determine the actual thermal equivalents directly in the organization - the consumer of this coal, you can use the data on this indicator from the documents of the suppliers or use the standard coefficients for converting the coal of the given basin (deposit) to the conditional one, which can be obtained from the territorial authority of Rosstat.

10. Lines 1632, 1633, 1640 contain data on the consumption of peat, peat briquettes and semi-briquettes in conditional humidity.

11. In line 1750, data on the consumption of heat energy by organizations of all types of economic activity are held (column 3).

Heat energy consumption does not include heat losses in heat networks (trunk, cities and urban-type settlements).

12. In cases when, under the terms of the contract, the lessee pays a payment to the lessor of the premises, which includes the cost of consumed heat energy, the lessor shall reflect information about this consumption of heat energy in the form.

13. Section 3 shows the value of outsourced, received from other legal and individuals under an exchange agreement, a commodity loan or free of charge, in the reporting year and capitalized upon receipt of fuel consumed for technological purposes, the generation of all types of energy (electric, thermal, compressed air, cold and other types), heating of buildings, buildings, operation of agricultural machinery and transport vehicles, transport work on the maintenance of production, performed by the organization's vehicles, regardless of what part of the fuel was used (consumed) in the reporting year for production and economic needs or remained in the warehouse in the form of leftovers.

The cost of purchasing fuel in this line is reflected at purchase prices (excluding VAT, excise taxes and similar mandatory payments), including transportation and procurement costs associated with its purchase; insurance costs; the costs of bringing the fuel to a state suitable for use for the planned purposes (costs of the organization for additional processing, sorting, packaging and improvement technical characteristics the received fuel, not related to the production of products, the performance of work and the provision of services); other costs directly related to the purchase of fuel, as well as non-refundable taxes paid in cases stipulated by the legislation of the Russian Federation.

Line 1880 shows the cost of refined products (gasoline, white spirit, kerosene, diesel fuel, heating oil, oil bitumen, lubricating oils), line 1881 - the cost of natural and associated gas, line 1882 - the cost of coal, line 1883 - the cost of others types of fuel (coke oven gas, blast furnace gas, open-hearth gas, hydrocarbon liquefied gas, coke, shale, peat, firewood and others), that is, this line reflects the purchased fuel of all types intended for the production process and the implementation of statutory activities, at cost, posted on the Debit of the inventory accounts.

Line 1885 shows the cost of electrical energy spent on technological, energy, motor and other production and economic needs of the organization (lighting, heating of buildings and other needs), line 1887 - the cost of thermal energy. Thus, these lines reflect the purchased energy used in production (according to actually accrued payments), attributed to production costs in the reporting period, at the cost recorded on the Debit of the accounts of expenses 20, 23, (25, 26), 29, 44 in correspondence with the Credit of accounts 60 (76) (for the totality of all possible correspondences of accounts of this group).

Line 1888 takes into account the cost of purchased water used for technological purposes and for other production and economic needs of the organization, the generation (including by the organization itself for production needs) of all types of energy, heating of buildings, as well as for the transformation and transmission of energy. Thus, this line reflects the cost of consumed water attributed to production costs in the reporting period (according to actually accrued payments), accounted for on the Debit of accounts 20, 23, (25, 26), 29, 44 (based on the aggregate of all possible correspondences of accounts from of this group) in correspondence with the Credit of accounts 60 (76).

This line does not reflect the cost of water, which is a necessary component in the composition of the produced product.

14. Section 4, lines 1890 and 1891, provides data, respectively, on the number of metering devices for electric energy and (if available) capacity.

Line 1892 provides data on the number of heat metering devices.

Lines 1893 and 1894 give data on the number of metering devices for hot and cold water, respectively.

Line 1895 contains data on the number of gas metering devices.

Column 1 "To be equipped with energy resources metering devices" contains data on the number of required energy resources metering devices, corresponding to the number of energy inputs.

Column 2 "Equipped with metering devices for energy resources" contains data on the number of actually installed metering devices for energy resources.

Column 3 "Energy resources metering devices put into operation" provides data on the number of actually operating energy resources metering devices, the readings of which are used when accounting for energy resources consumption (calculations with energy and resource supplying organizations).

1. According to the lines of section 1 of the form, data on balances, receipts, consumption of certain types of fuel and heat energy and, in addition, the supply (sale) of these types of fuel to other enterprises and organizations and the population are given. The volume of fuel (thermal energy) consumption includes the volumes of losses in technological processes, when converting into other types of fuel or energy, as well as losses and shortages drawn up by appropriate acts during storage and transportation.

The lines “Aviation gasoline for aircraft piston engines”, “Automobile gasoline”, “Diesel fuel” contain data on all brands, grades and classes of environmental safety of the specified oil products in tons. Data on volumes of straight-run gasoline, solvent gasoline and special gasolines are not reflected in these lines.

From the total volumes of motor gasoline and diesel fuel, data on their consumption for the operation of vehicles are allocated, respectively, according to lines 1012 and 1032. Fuel consumption by specialized vehicles mounted on automobile chassis (cranes for motor vehicles, fire engines, sanitary vehicles, for municipal utilities, etc.) are not reflected for these lines.

The line “Domestic stove fuel” contains data on the volume of petroleum products obtained from diesel fractions of direct distillation and secondary origin, used mainly in domestic heating installations.

The line “Combustible natural gas (natural gas)” contains data on the volume of natural gas from gas and gas condensate fields.

The line "Associated gas (combustible natural gas from oil fields)" contains data on the volume of natural gas from oil fields, dry gas from stripped gas processing plants and desulfurization gas.

Gas obtained at the enterprise as a result of oil refining, gas condensate (gas from refineries), and liquefied gases are not included in the data on the volumes of combustible natural gas (natural gas) and associated petroleum gas (combustible gas from natural oil fields).

From the total volumes of combustible natural gas (natural gas) and associated petroleum gas (combustible gas from natural oil fields), data on their consumption in compressed form for the operation of vehicles, respectively, according to lines 1082 and 1092 are allocated. Fuel consumption by specialized vehicles mounted on automobile chassis (cranes road-going, fire-fighting vehicles, ambulances, for urban communal services etc.) is not reflected for these lines.

If the reporting organization consumed coal, firewood or peat for the production of generator gas, then the consumption of the generator gas received by them is not reflected in the report in the form, but the direct consumption of fuel used for its production (coal, firewood, peat) is given.

The line "Artificial coke gas combustible gas" contains data on the volumes of gas obtained in the process of coking, rich gas obtained at nitrogen fertilizer plants and chemical plants after the hydrogen fraction is taken from the coke oven gas and returned to the by-product coke plants.

The volume of coke oven gas, as well as the returned rich gas, should be reflected in thousands of cubic meters, normalized to 4000 kcal / m3. m.

This line also provides data on the volumes of other waste gases (excluding waste gases from metallurgical production).

The line “Combustible artificial blast-furnace gas” contains data on the volume of gas obtained in the blast-furnace process. The volume of blast furnace gas should be reflected in thousands of cubic meters, reduced to 1000 kcal / cubic meters. m.

This line also provides data on the volumes of other waste gases from metallurgical production.

The line “Gas from refineries” provides data on the volume of refined gas or gas condensate (including the amount burned in flares at refineries). Liquefied gas of oil refineries is reflected in the line “Propane and butane, liquefied, hydrocarbon gases and other liquefied gas mixtures thereof, not included in other groups”.

The line “Dry gas” contains data on the volume of only dry gas from oil refining or gas condensate.

The line “Ethane (ethane fraction)” contains data on the volume of the ethane fraction of gas processing. This volume does not include the volume of dry stripped gas.

The line "Propane and butane, liquefied, hydrocarbon gases and other liquefied mixtures thereof, not included in other groups" contains data on the volumes of the following fractions of liquefied hydrocarbon gases: liquefied propane with a purity of at least 99% for use as fuel and for other purposes, propane-propylene fraction, propane (propane fraction, including spent propane-propylene fraction), normal butane (including spent butane-butylene fraction), isobutane (isobutane fraction), butane-butylene fraction, propane-butane fraction (household condition), liquefied propane or butane with a purity of less than 95%, used as feedstock for oil refineries and for the petrochemical industry, pentane (pentane fraction), isopentane (isopentane fraction), pentane-hexane fraction. Other types of liquefied gases, if they are used as fuel, are reflected in the line “Other types of petroleum products”.

From the total amount of data on this line, data are allocated on the consumption of propane and butane, liquefied, hydrocarbon gases and their mixtures, liquefied others that are not included in other groups for the operation of vehicles on line 1151. Fuel consumption by specialized vehicles mounted on automobile chassis (cranes on a truck running, fire trucks, sanitary vehicles, for municipal utilities, etc.), this line is not reflected.

The line “Coal” contains data on the volumes of coal, coal concentrate, middlings, sludge, screenings, coal briquettes used at the enterprise as fuel, raw materials for production, for non-fuel needs.

In order to avoid double counting, the volume of coal directed to beneficiation to obtain coal concentrate, middlings, sludge, screenings, coal briquettes is not reflected in the report.

Coal concentrate, middlings, sludge, screenings, coal briquettes must be included in the total volume of coal (line 1160), including the volume of coal in the corresponding basin or deposit.

Coal and products of its processing (processing) are converted into conventional fuel, as a rule, by multiplying the volume of coal in physical terms by its actual thermal equivalent (K), defined as the ratio of the lowest calorific value of the working state of the fuel to the calorific value of 1 kg of standard fuel, t i.e. 7000 kcal / kg. If it is impossible to recalculate this coal into equivalent fuel, the state statistics authorities should provide them with standard coefficients for converting the coal of a given basin (deposit) into a conditional one.

The line “Fuel wood” reflects the data on the volumes of fuel wood purchased in the wholesale trade, received from self-procurement of the reporting organization or purchased from other suppliers. This line also takes into account deciduous industrial wood of low-value business assortments, as well as low-quality industrial wood, transferred to firewood under the act.

The volume of firewood purchased for fuel purposes, but used for non-fuel needs - for the manufacture of various products (container boards, shavings, etc.) for their own needs, technological chips or containers - is reflected in the "Fuel wood" line.

The data on the consumption of heat energy in line 1750 should be equal to the sum of the data on its consumption in lines 1751-1753.

If the metering devices for the thermal energy of hot water supply register its consumption in m3, then the recalculation in gigacalories (line 1753) should be carried out according to the following formula:

DIV_ADBLOCK115 ">

Average annual temperature hot water in centralized hot water supply systems should be at least 40 ° C. In the reference book of water densities, its value at this temperature is 0.99225, at 50 ° С - 0.9881, at 60 ° С - 0.9832, at 70 ° С - 0.9778, at 80 ° С - 0.9718, at 90 ° С - 0.9653 and at 100 ° С - 0.9584

2. Section 2 of the form provides data on the collection and use of waste oil products by organizations, with the exception of oil depots.

Line 1810 "Waste motor oil (IMO)" reflects the movement of used motor oils (for aircraft, piston, carburetor and diesel engines), compressor, vacuum, oils, oils for rolling mills, as well as industrial oils.

Line 1820 "Waste industrial oil (IIO)" reflects the movement of waste industrial oils and working fluids for hydraulic systems, gas turbine, insulating, instrument and turbine oils, oils for refrigeration compressors.

Line 1830 "Waste oil mixture (SNO)" reflects the movement of oil flushing fluids; oils used in heat treatment of metals, cylinders, transmission oils; oil and liquid fuel oil extracted from treatment facilities and oily waters.

If an enterprise has sold waste oil products to other enterprises, then when completing Section II, it is necessary to reduce the data in column 2 by the number of transferred waste oil products. In this case, the sum of the data in columns 1 and 2 must be equal to the sum of the data in columns 3, 4, 5, 6, 7, 8.

If the enterprise has destroyed part of the waste oil products, then in order to maintain the balance, it is necessary to show this volume in the balance at the end of the reporting year, indicating the volume of destroyed waste oil products in the note to the report.

3. Section 3 of the form shows the cost of energy resources purchased in the reporting year from other legal entities and individuals (including under an exchange agreement, a commodity loan or free of charge), capitalized upon receipt and spent for technological purposes, the generation of all types of energy (electric , thermal, compressed air, cold and other types), heating of buildings, structures, operation of agricultural machines and vehicles, transport work on maintenance of production performed by the organization's vehicles, regardless of what part of the energy resources was used (consumed) in the reporting year for production and economic needs or remained in the warehouse in the form of leftovers.

The costs of their acquisition do not include the costs associated with the acquisition of energy resources intended for resale to other legal entities and individuals.

Expenses for the purchase of energy resources are reflected at purchase prices (excluding VAT, excise taxes and similar mandatory payments), including transportation and procurement costs associated with its acquisition; insurance costs; the costs of bringing the fuel to a state suitable for use for the planned purposes (costs of the organization for processing, sorting, packaging and improving the technical characteristics of the obtained fuel, not related to the production of products, the performance of work and the provision of services); other costs directly related to the purchase of fuel, as well as non-refundable taxes paid in cases stipulated by the legislation of the Russian Federation.

4. Section 4 of the form reflects data on the equipment with metering devices. Metering devices for which the calculations of energy resource suppliers with energy resource consumers are not carried out (intra-shop meters) are not included in these data.

Column 1 "The total number of calculated points of energy resources metering" provides data on the total need for equipping (number) with energy metering devices at the calculated metering points, which are used for calculations of energy resource suppliers with energy resource consumers.

Column 2 “The number of calculated metering points equipped with energy metering devices” provides data on the number of actually installed energy metering devices at the calculated metering points, which are used for calculations of energy resource suppliers with energy resource consumers, regardless of the date of their installation.

Column 3 "Commissioned energy metering devices" provides data on the number of energy metering devices actually installed and commissioned during the reporting year, according to the indications of which settlement with their suppliers is carried out.

Active Edition from 20.07.2009

ORDER of Rosstat dated 20.07.2009 N 146 "ON APPROVAL OF INSTRUCTIONS FOR FILLING IN FORMS OF FEDERAL STATISTICAL OBSERVATION N 11-TER" "INFORMATION ON THE FORMATION AND USE OF SECONDARY ENERGY RESOURCES", N 4-TER "

II. Filling in the indicators of form N 4-TER

Section 1. Residues, receipt and consumption of fuel and heat energy

6. The lines “Aviation gasoline”, “Automobile gasoline”, “Diesel fuel” include all brands and grades of the specified oil products in tonnes. Special gasolines (gasoline for the chemical industry, solvent gasoline, straight-run gasoline) are not taken into account in these lines.

Of the total amount of gasoline for motor vehicles and diesel fuel, separate lines 1012 and 1032 in column 3 "Consumed in the reporting year - total" show the volume of these petroleum products consumed for the operation of vehicles. Gas consumption for the operation of road transport is also given in lines 1092 and 1151 of the total gas consumption of combustible natural (natural) and hydrocarbon liquefied gases. Fuel consumption by specialized vehicles mounted on automobile chassis (mobile cranes, fire-fighting vehicles, sanitary vehicles, for municipal utilities, etc. vehicles) is not reflected in these lines.

The line "Kerosene" reflects all types of kerosene - aviation (jet fuel), lighting, tractor.

If the company keeps records of motor gasoline, diesel fuel, liquefied gas in liters, then when converting from volumetric units to weight units, their actual density (specific gravity) should be used, measured with the help of petrodensimeters during the accounting period.

To do this, the number of liters must be multiplied by the actual density, the result is divided by 1000. In the absence of oil densimeters, the conversion from volumetric units to weight units should be performed using the weighted average density calculated for the reporting period. For the calculation, the densities specified in the consignment notes of each batch of the corresponding oil product delivered to the enterprise are taken.

The weighted average density is determined as follows.

For example, during the reporting period, the company received three batches of gasoline: I batch - 2000 tons with a density specified in the consignment note equal to 0.72; II batch - 5000 tons - 0.74; III batch - 8000 tons - 0.735. Thus, the company received 15,000 tons of gasoline during the reporting period.

Based on the indicated density, we determine the amount of gasoline supplied to the enterprise in volume units:

Organizations that do not have the above information can convert fuel volumes from liters to tons using average density values.

Separate average density values ​​for:

motor gasoline:

A-76 (AI-80) - 0.715 g / cu. cm, AI-92 - 0.735 g / cu. cm, AI-95 - 0.750 g / cu. cm, AI-98 - 0.765 g / cu. cm;

diesel fuel: summer - from 0.83 to 0.85 g / cu. cm, winter - from 0.8 to 0.83 g / cu. cm, arctic - from 0.8 to 0.82 g / cu. cm.

The line "Domestic stove fuel" contains data on petroleum products obtained from diesel fractions of direct distillation and secondary origin, used mainly in domestic heating installations.

The line "Fuel oil" contains data on heating oil of grades 40 and 100, fuel oil for open-hearth furnaces, technological export fuel (TU 38.001361-87).

The line "Fuel oil for floats" includes fuel oils of grades F-5 and F-12.

The line "Natural combustible gas (natural)" contains all natural gas - natural gas from gas, gas condensate, oil fields, as well as processed gas - dry gas from gas processing plants (stripped and desulfurized gas).

Gas received at the enterprise as a result of oil refining, gas condensate (gas from dry refineries), and liquefied gas are not reflected in this line.

If the reporting entity has consumed coal, firewood or peat to produce generator gas, then the consumption of the generator gas received by them in the report on form N 4-TER it is not reflected, but the direct consumption of fuel used for its production (coal, firewood, peat) is given.

The only exceptions are organizations that use generator gas generated during the production of char. These enterprises must reflect the movement of the indicated gas under the line "other fuels" in terms of fuel equivalent.

The line "Artificial coke combustible gas" contains the amount of gas obtained in the coking process, rich gas obtained at nitrogen fertilizer plants and chemical plants after the hydrogen fraction is taken from the coke oven gas and returned to the coke-chemical plants.

The amount of coke oven gas as well as rich gas returned shall be shown in thousand cubic meters, normalized to 4000 kcal / m3. m.

This line also provides information on other waste gases (excluding metallurgical waste gases).

The line "Artificial blast-furnace combustible gas" shows the amount of gas obtained in the blast-furnace process. The amount of blast furnace gas should be shown in thousand cubic meters, reduced to 1000 kcal / m3. m.

This line also provides information on other waste gases from metallurgical production.

The line "Gas from refineries dry" shows the consumption of dry refined gas or gas condensate (including the amount burned in flares at refineries). Gas from refineries, obtained in liquefied form, is accounted for under the line "Liquefied gas".

Under the line "Liquefied gas (liquefied hydrocarbon gases)" the following fractions of liquefied hydrocarbon gases are given: technical butane, butane-isobutane, isobutane, normal butane, propane, technical propane (PT), propane-butane-pentane fraction (other liquefied gases), mixture of technical protane and butane (SPBT), protane-butane and protane-propylene fractions. Other types of liquefied gases, if used as fuel, are shown in the line “Other fuels”.

The line "Coal and coal processing products" includes coal, coal concentrate, middlings, sludge, screenings, coal briquettes used at the enterprise as fuel, raw materials for production, for non-fuel needs.

In order to avoid double counting, coal sent for beneficiation to obtain coal concentrate, middlings, sludge, screenings, coal briquettes is not reflected in the report.

Coal concentrate, middlings, sludge, screenings, coal briquettes are included both in the total volume of coal and products of its processing (line 1160), and in the volume of coal in the corresponding basin or deposit.

Organizations consuming coal and its processed products, in the free lines (after line 1160) of the report, provide data on the volumes of coal consumption by basins and deposits, in the sequence specified in Appendix N 1 to this Direction, with an entry in column A - the names of coal, B - numbers of the corresponding line.

Organizations producing coke, semi-coke, etc., from the total amount of coal shown in the line "Coal and coal processing products", as well as the coals of Kuznetsk, Vorkuta, Neryungri, Karaganda, Donetsk and others used to produce coke a separate line is the volume of coal used for coking - "including for coking".

On line 1630, of the total amount of coal available at the enterprise, brown coal is also allocated.

Brown coals in full include Moscow region (line 1230), Chelyabinsk (1270), Bashkir (1290), Kansk-Achinsky (1380), Raichikhinsky (1410), Chita (1350) coals.

Of the Sverdlovsk coals (line 1280), brown coals belong to the Bogoslovskoye and Volchanskoye deposits, from the Yakut (1320) coals - Kangalasskoye, from the Primorye coals (1490) - everything except the coals of the Lipovetsky and Partizansky deposits.

Coal Gusinoozersky (line 1360), Sakhalin (1430), Kamchatka (1480) can be partly stone, partly brown.

Coal from deposits not specified in Appendix No. 1 of this Procedure is accounted for in the line "Coal from other deposits" (1500).

Lines 1161 and 1631 contain data on coal and products of its processing and brown coal, respectively, in tonnes of fuel equivalent.

Conversion of fuel from natural expression to conventional fuel of coal equivalent should be made by multiplying the data of this fuel in physical terms (tons, cubic meters, etc.) by the corresponding caloric equivalent (conversion factor). Calorie equivalents are based on periodic measurement the calorific value of fuel in a laboratory way. If it is not possible to determine the calorific value in this way, then to convert the fuel into a conventional one, it is necessary to use the calorie equivalent corresponding to the given type of fuel, indicated in Appendix No. 2 to this Directive.

For the lines "Fuel milling peat", "Fuel lump peat" and "Peat briquettes and semi-briquettes (fuel)", the data are given in terms of conditional moisture content: milled peat is reduced to 40% moisture, lump peat - to 33%, peat briquettes - to 16%, peat semi-briquettes - to 28% moisture.

The recalculation of all types of peat and peat briquettes and semi-briquettes from the actual to the conditional humidity is carried out according to the following formula:

P_sl - weight of peat (briquettes and semi-briquettes) in terms of conditional moisture in tons;

P_fact - weight of peat (briquettes and semi-briquettes) of actual moisture in tons;

В_fact - actual moisture content of peat (briquettes and semi-briquettes) in percent;

W_usl - conditional moisture content of peat (briquettes and semi-briquettes) in percent.

For example, in the reporting year, the enterprise received 1,500 tons of sod peat with a moisture content of 70%, the weight of Kus peat in terms of a conditional 33% moisture content will be:

The line "Slates" reflects the volumes of oil shale - Leningrad, Kashpir (without processing, sorted and enriched).

The line "Metallurgical coke, coke and coke breeze" contains the entire volume of blast furnace and foundry coke with a lump size of 25 mm and more, dry coke nut - 10 - 24 mm and dry coke breeze - 0 - 9 mm.

This line also reflects the under-grain waste obtained during screening of coke.

Dry metallurgical coke, as well as coke nuts and fines are given in terms of dry weight.

For example, if coke breeze has a moisture content of 10%, then its natural weight should be multiplied by 0.9, that is, its dry weight, reflected in the report, will be 90% of natural.

The line "Firewood for heating" reflects the data on the volumes of fuelwood purchased through wholesale trade, received from self-procurement of the reporting organization or purchased from other suppliers. The specified line also takes into account deciduous industrial wood of low-value business assortments, as well as low-quality industrial wood, transferred to firewood under the act.

The volume of firewood purchased for fuel purposes, but used for non-fuel needs - for the manufacture of various products (container boards, shavings, etc.) for their own needs, technological chips or containers - is reflected in line 1690 "Firewood for heating".

Waste from logging and woodworking (branches, needles, chips, wood scraps, shavings, sawdust, bark, stumps), as well as dismantled unusable sleepers used as fuel, mine rack, communication posts, wooden containers, logs of dismantled old buildings, etc. ., used by the organization both for fuel purposes and sold to the population, workers and employees, are not reflected in the line "Firewood for heating", but are shown in line 1730 "Other solid fuels" in terms of equivalent fuel.

The volumes of firewood should be given only in solid cubic meters. If the organization keeps records of firewood in warehouse cubic meters, then it is necessary to convert it into dense cubic meters by multiplying their volume in warehouse cubic meters by a factor of 0.7.

The line "Other types of petroleum products" contains data on all petroleum products not listed in lines 1001 - 1060, which were used during the reporting year as fuel (motor or boiler-furnace). Inclusion in the report of data on the use of other types of petroleum products as raw materials or for non-fuel needs is not allowed. Information on residues is given only for those volumes of these petroleum products, which in this organization are intended for use as fuel.

If the company used oil as fuel, then its movement should also be shown on line 1700 "Other types of petroleum products" (1700) in terms of equivalent fuel, as well as on line 1720. Oil used as raw material in the report on form N 4-TER not taken into account.

The line "Other solid fuels" contains data on all types of fuel (in equivalent fuel) not listed in lines 1001 - 1720 form N 4-TER received and used by the organization for fuel purposes.

Other types of solid fuels include industrial waste, including solid and liquid secondary energy resources, household waste, other types of natural fuel (peat chips, straw, reeds, brushwood, fire, corn stalks, husks, logging and woodworking waste, and also used as fuel dismantled wooden sleepers, mine racks, tie posts, wooden containers, logs of dismantled old buildings, etc.).

The line "Heat" contains data on the consumption of heat directly in this organization, regardless of whether it was produced in this organization or received from outside.

Heat energy consumption does not include heat losses in heat networks (trunk lines, cities and towns).

In cases where, under the terms of the contract, the lessee pays a payment to the lessor of the premises, which includes the cost of consumed heat energy, information about this consumption of heat energy is reflected in the form by the lessor.

In cases where an organization that does not have heat metering devices produces heat energy and all heat energy is consumed in this organization, the volume of heat energy consumption is determined by calculation.

The volume of heat energy produced is equal to the volume of its consumption and is determined:

for produced in heating boilers - by the volume of fuel used for this purpose and the specific consumption of this fuel per unit of supplied (produced) heat energy. Information on the value of this specific consumption can be obtained from the territorial agency of Rosstat;

for those produced in electric boilers - by multiplying 1 mW of electric boiler power by 0.86 Gcal and the number of hours of operation of this electric boiler.

7. Columns 1 and 9 "Balance at the beginning of the reporting year" and "Balance at the end of the reporting year" provide information on the availability, respectively, at the beginning and end of the year of fuel at all plant, intermediate, workshop and other warehouses of the organization, including departmental warehouses, warehouses subsidiary industries, communal and cultural enterprises, housing and communal departments, in other places where fuel is stored (own and rented), as well as its residues in bunkers, containers, car tanks, measuring tanks, storerooms, on construction sites, at boilers, production units, in stacks, on ships located at berths, on piers, in ports and harbors, in locomotives in railway depots.

The residues of liquid petroleum products (heating oil, diesel fuel, etc.) include the entire volume of fuel in the tanks, including that which cannot be drained ("dead" residues).

Fuel residues written off for production, construction, agricultural or other needs, but not actually consumed, should be included in the total balances at this enterprise at the end of the reporting period. This should also include the remains belonging to this enterprise and stored for any reason at another enterprise; the size of these residues should be noted at the end of the report, indicating the name and address of the custodian organization.

An organization that at the end of the reporting period stored fuel belonging to other organizations and recorded on off-balance sheet accounts shall not include the volume of such fuel in the report of this organization. This fuel is reflected in the report of the organization on the balance sheet of which it is listed.

Fuel in custody (state reserve and mobstorage), as well as fuel residues on transport vessels (except for fishing), diesel locomotives on the date of the report, are not included in the residues.

Also, fuel that has arrived at the final railway station and is in wagons or tanks belonging to the railway, documents for which have been received and the invoice paid, but the fuel has not yet been recorded by the accounting department, is not included in the residuals.

Organizations - consumers of fuel, which are at the same time its producers, in terms of fuel of their own production (production), provide only consumer fuel residues, that is, fuel residues intended for consumption in a given organization and for sale to the population, their workers and employees. Trade remains of fuel intended for sale to other organizations are not taken into account. Remains of fuel purchased from other organizations are accounted for in full.

8. In column 2, organizations - consumers of fuel and organizations involved in its sale, provide the entire actual volume of fuel received for the reporting year.

Consumer organizations, which are at the same time its producers, in column 2 in terms of fuel of their own production (production), provide data only on the amount of fuel produced by them, which is used for their own needs, sold to the population (their workers and employees) or went to increase consumer balances fuel at this enterprise. Fuel purchased from other organizations is accounted for in full.

Column 2 is not reflected in the fuel received for bookmarking in the state reserve, paid not from the funds of the reporting enterprise and recorded by the accounting department on off-balance sheet accounts.

9. Column 3 shows the entire actual fuel consumption at the enterprise, including losses in technological processes, when converting it into other types of fuel or energy, as well as losses and shortages drawn up by appropriate acts during storage and transportation.

When filling out column 3 of the form by nitrogen fertilizer plants and agricultural chemical enterprises on the line "Artificial coke combustible gas", it should be borne in mind that this column records the consumption of coke oven gas for production, technological and other needs minus the volume of rich gas returned to the coke plant.

For example, an agricultural chemistry enterprise received 10,000 thousand cubic meters in the reporting year. m of coke oven gas (reduced to 4000 kcal / m3). As a result of using it for production and technological needs, in addition to the main product, rich gas was obtained in the amount of 3000 thousand cubic meters. m with a calorific value of 6000 kcal / cu. m. Its amount, reduced to 4000 kcal / cubic meter. m, will be:

Which was returned to the by-product coke plant, which must be recorded in a note to the report.

The agrochemistry enterprise in the report on form N 4-TER on the line "Artificial coke combustible gas" (reduced to 4000 kcal / cubic meters) in column 2 will show 10,000 thousand cubic meters. m, in column 3 - 5500 thousand cubic meters. m, in column 4 - 4500 thousand cubic meters. m.

The coke-chemical enterprise on the line "Combustible artificial coke oven gas" in column 2 will show the volume of gas returned to it in the amount of 4500 thousand cubic meters. m.

Road transport enterprises include in their report on columns 3 and 4 data on the amount of gasoline and diesel fuel consumed both for their own needs and for servicing third-party organizations; vehicles rented from individuals or small businesses; in case of on-farm lease of vehicles by employees of the enterprise (associated with labor relations).

Agricultural enterprises that attract vehicles from other enterprises and organizations for harvesting, the amount of fuel consumed by these vehicles is shown in columns 2, 3 and 4.

10. From the total consumption (column 3), the fuel consumption data is highlighted as:

a) motor (column 4) - oil products, liquefied and compressed gas used in internal combustion engines - automobile, tractor, agricultural, aircraft engines, engines of sea, river vessels, etc .; this column also takes into account the fuel consumption in chainsaws, units for pumping oil, oil products and gas;

b) as raw materials (column 5) - fuel resources used as raw materials for the production of chemical, petrochemical or other non-fuel products, that is, the above-mentioned products were produced from this type of fuel. This column does not reflect the amount of fuel used for the production of other types of fuel, with the exception of coking coal used for the production of coke; fuel peat - for the production of peat briquettes and semi-briquettes;

c) for non-fuel needs (column 6) - fuel resources used as material for non-fuel needs. For example, coal is used as an additive to clay solutions in oil drilling, as well as as a filtering agent; gas injected into the reservoir to maintain reservoir pressure; fuel peat, used as a heat-insulating material and for fertilization; firewood used for the production of container boards; oil used for well flushing; fuel oil used as a lubricant, kerosene used for flushing parts, etc. This column also provides information on the consumption of coke used as a reducing agent in the blast furnace process.

Data on the consumption of fuel resources used directly as boiler and furnace fuel (by combustion) in the production of electricity and heat at power plants and boiler houses, in order to create the required temperature regime in technological processes, are reflected only in column 3. For coke, data only on its consumption as boiler and furnace fuel.

The volume of consumption of boiler and furnace fuel is determined as follows: gr. 3 - (column 4 + column 5 + column 6).

11. If the reporting enterprise - the consumer of fuel, out of the total volume of fuel, part of it has been released (sold) to other enterprises, then this amount is reflected in column 7 "In addition, released (sold) for the reporting year to other enterprises and organizations". This also includes fuel previously borrowed by the reporting entity from the state reserve and returned in the reporting period.

If an enterprise sells fuel for heating or cooking to utility or other facilities that are on an independent balance sheet or the balance sheet of other enterprises, but located in the rented premises of the administrative or industrial buildings of the reporting enterprise, the needs of which they serve, then this fuel is considered sold to the outside. and is shown in column 7.

Organizations engaged in the sale of fuel, indicate in column 7 the entire volume of fuel sold by them to other enterprises and organizations.

Organizations - fuel producers do not reflect the sale of fuel of their own production (production) to other legal entities in column 7. The fuel sold by these enterprises directly to the population or supplied to their employees, retirees, is shown in column 8.

12. Column 8 "In addition, released (sold) for the reporting year to the population, including those released to workers and employees" shows all the fuel sold to the population, as well as released to workers, employees, pensioners of the reporting enterprise (organization). This column also reflects the fuel sold to homeowners' associations for the needs of the population (unless payment is provided directly by the population for the cost of fuel consumed). The homeowners' associations themselves reports on form N 4-TER do not represent.

The amount of natural gas sold to the population is determined according to the bills paid in the reporting period, based on the established tariffs (when the cost of consumed gas is paid directly by the population, regardless of the form and method of payment).

If the reporting organization supplies fuel to the fuel supplying organization for subsequent sale from its warehouses to the population, workers and employees (the fuel is recorded by the accounting department of the enterprise), then this fuel is reflected in the report of this enterprise (in column 8), and not the fuel supplying organization.

Internal movements, that is, the receipt and consumption of fuel in the order of transfer from warehouse to warehouse, from one workshop to another, from the storeroom to the warehouse, and other movements within the enterprise (organization) are not shown in this form.

13. This section is filled in by all enterprises (organizations) that have waste oil products, except for oil depots.

Line 1810 "Waste motor oil (MMO)" shows the movement of used engine oils (for aviation, piston, carburetor and diesel engines), compressor oils, vacuum oils, oils for rolling mills, as well as industrial oils that meet the requirements of Table 2 of GOST 21046- 86.

Line 1820 "Waste industrial oil (IIO)" shows the movement of waste industrial oils and working fluids for hydraulic systems, gas turbine, insulating, instrument and turbine oils, oils for refrigeration compressors that meet the requirements of Table 2 of GOST 21046-86.

Line 1830 "Waste oil mixture (СНО)" reflects the movement of oil flushing fluids; oils used in heat treatment of metals, cylinders, transmission oils; oil and liquid fuel oil extracted from treatment facilities and oily waters.

Line 1800 "Total" is the sum of lines 1810, 1820, and 1830.

14. Columns 1 and 8 indicate the balances of waste oil products by groups and their total amount, respectively, at the beginning and at the end of the reporting year.

Column 2 shows the number of waste oil products by groups and in total collected by the enterprise (organization) for the reporting year, both from its own use and purchased from outside.

Columns 3 - 5 indicate the amount of waste oil products by groups and in total used by the enterprise (organization) for its own needs and as raw materials for cleaning (regeneration) on the existing regeneration equipment, as a component of boiler fuel, and for technological needs (lubricants of open and closed units friction, conservation, technological lubrication, lubricant and technological additive).

Columns 6 and 7 indicate the number of waste oil products by groups and in general, sold (delivered) to oil depots, as well as for export.

If an enterprise has sold waste oil products to other enterprises, then when completing Section II, it is necessary to reduce the data in column 2 by the number of transferred waste oil products. Under this condition, the sum of columns 1 and 2 will be equal to the sum of columns 3, 4, 5, 6, 7, 8.

If the enterprise has destroyed part of the waste oil products, then in order to maintain the balance, it is necessary to show this amount in the balance at the end of the reporting year, indicating the volume of destroyed waste oil products in the note to the report.

With the introduction of this Instruction, the previously valid Order on filling out and submitting the form of federal state statistical observation N 4-fuel "Information on residues, receipt and consumption of fuel, collection and use of waste oil products", approved by the Decree of the Federal State Statistics Service of 19.08.2004 N 36.

Enterprise Statistics Department