Download software for the hp laserjet 1020 printer. Installation and software
HP LaserJet 1020
Innovative laser printer The HP LaserJet 1020 is an excellent choice for the office, stationery or home, which will allow you to carry out up to 5000 thousand different black and white operations per month, without harming the device. In this case, the basic resource of the cartridge is enough for 2000 b / w copies or printouts of various documentation. The maximum print resolution is 600x600 DPI, which is quite enough to get high-quality text. Download driver for HP LaserJet 1020, you can follow the links below.
At a print speed of 14 ppm, the first print will come out after the start of the task after 10 seconds. In addition to standard office paper, the printer can print on high-density glossy and matte paper, various films, envelopes and labels. A feature of this model can be considered the factory toner saving mode, in which the basic resource of the cartridge can be enough for a larger number of copies.
Windows 2000/2003 / XP / Vista / 7/8 / 8.1 / 10 - basic
Size: 2.6 MB - x32 and 3 - x64
Bit depth: 32/64
After installing the HP LaserJet 1020 driver, we recommend that you additionally do the following if the printer does not work:
- restart your computer;
- turn off and then turn on the printer.
Be sure to see if you are sending the document there for printing, and if this driver did not help, then use the installation option just below.
Windows update - for everyone Windows versions XP-10
If the above method did not help, namely the printer does not show signs of life, then to install the HP LaserJet 1020 you can use standard means Windows. To do this, follow everything in steps.
Driver Installation in Windows 10
The HP LaserJet 1020 printer, like any other device connected to a computer or laptop, requires a driver to be installed. You can connect a printer and give operating system make the settings yourself, but this method is not always effective. More often than not, it doesn’t give any results or the device doesn’t work correctly. Therefore, it is better to take the driver that is designed specifically for your model and follow the simple installation steps. About them below, but for now you need to download the driver HP LaserJet 1020 from the link provided above. When downloading a file, pay attention to the path where the file will be downloaded.
Close all running programs so that they do not interfere with the installation. Open the driver folder and run the installation. To do this, double-click the left mouse button on the downloaded file. You will see a window with a license agreement. Read the text and left-click on the box next to the words "I accept the terms of the license agreement." Click Next.
The installation will begin. You just have to wait a little.
Turn on the printer. You need to connect it to the power supply (wall outlet) and connect the device to your computer. Next, press the power button on the printer.
The program will automatically see the printer and complete the installation. You can start printing documents.
The HP LaserJet 1020 is a medium-duty home or small office printer. Has an average print speed. The HP 1020 series printers run on a fairly reliable cartridge that refills well. In general, a good device. Among the problems are a possible breakdown of the formatter board (in this case, the computer stops seeing the device), problems with paper capture, failure of the fuser (as a rule, due to the user's fault).
Key features of HP LaserJet 1020
- Common parameters
Manufacturer: HP
Series: LaserJet
Model: LaserJet 1020
Device type: a printer
Accommodation: desktop
Application area: personal
Monthly load: desirable from 5,000 to 5,500 pages
- Print options
Maximum format: A4
Printing technology: laser
Chromaticity: black and white
Number of colors: one
Max print resolution dpi (b / w): 60 0 x 600
Max print speed (b / w): 14 ppm A4
First page out time (b / w): 10 sec
Fields: by 4 mm. top, bottom, left and right
- Media / paper used
Paper feed tray capacity: 1 50 sheet.
Output paper capacity: 100 sheet.
Manual Feed Tray Capacity: 1 sheet.
Paper density: 60-163 g / m2
Carriers: film, labels, glossy paper, envelopes, matte paper
- Consumables / Replaceable Parts
Type of consumable: cartridge
Black cartridge: (12A)
Number of cartridges: one
Resource of cartridges - toners: 20 00 p.
- Specifications
Processor type: RISC
Processor frequency: 234 MHz
Connectors / interfaces: USB 2.0
Memory: 2 MB, max 2 MB
PostScript Support: there is no data
Font support: there is no data
OS Compatibility: Windows up to XP x32, laterthey may have problems
MIN requirements: computer with USB and 16 Mb memory
- Energy efficiency / noise
Power consumption when printing: 250 0 watts
Standby power consumption: 2 W
Power supply type: built-in
Network: 220 V
Noise level when printing: 62 dBA
- Dimensions and weight
Height (cm): 20,9
Length (cm): 24,2
Width (cm): 36,9
Packing dimensions (cm): 49.1 x 30.2 x 34.1
Weight (gram): 5005
Carton weight (gross) (grams): 6980
Installation and software
Download HP 1020 driver for windows
Common problems
- Often users are faced with the fact that. The reason is the failure of the formatter board. In this case, the repair of the device is impractical, and the only thing for which it can be useful is to check the cartridges after refueling (it will print a sailor suit, after appropriate revision)
- The oven of the device may fail both due to natural causes and due to the fault of the user (staples and other foreign objects getting into the device).
- Often there is a problem when the thermal film on the hp lj1020 slides to the side (this is due to the rubber shaft bushings).
Instructions
- Printing of the internal test "Matroska" - the printer needs to be revised. Disassemble the device and on the ECU-board in the J-901 connector short-circuit the two outer contacts (located on the right side, when looking at the printer from the front). A button is soldered to these two contacts and when pressed, a test page with thin lines is printed. Use the Service manual to find the connector.
Compatible parts
- Rubber shaft # RC1 —2136 —000 / RC1 —2135 / RM1 —0660 also fits LJ1015 / 1012/1018 and Canon LBP 2900. Be careful when ordering a different pressure roller for the HP 1022
- Thermal film is compatible with many HP printers with a similar fuser unit. Can be installed from HP 1200/1150 etc. The "Thermal film HP LJ 1300/1320/1160 (P, U)" has proven itself well
HP LaserJet 1020 Driver is not a software upgrade. It is a full software solution for your printer. If a prior version software is currently installed, it must be uninstalled before installing this version.
Drivers for / Treiber für / Drivers for / Ovladače pro / Sterowniki do HP LaserJet 1020 Printer.
Release details:
Driver: HP LaserJet Full Feature Software and Driver
Version: v1601
Filename: hp_LJ1020_Full_Solution-v2012_918_1_57980.exe
File size: 80.2 MB
Updated: Jan 6, 2016
Released: Jan 6, 2016
HP LaserJet 1020 Driver Windows 10: Free
Utility - Diagnostic Tools
The HP Print and Scan Doctor is a tool designed and developed by HP to provide users with troubleshooting and problem-solving features.
Utility: HP Print and Scan Doctor for Windows 10
Version: 5.2
Filename: HPPSdr.exe
Size: 10 MB
Why you need this Driver?
You need a printer driver to control the functionality of your HP printer from your PC, Laptop or tablet. Without drivers either your printer won’t work or it will not work smoothly with all features. If you bought a new printer or you are upgrading your operating system, you need the latest printer driver to utilize all features of your printer.
How to install HP LaserJet 1020 Driver?
- Close all HP software / programs running on your computer.
- Uninstall your current version of HP Print Driver for HP LaserJet 1020 Printer.
- Click on the above download link and save the file to your hard disk.
- Double click on the downloaded file. This will extract all the HP LaserJet 1020 driver files into a directory on your hard drive.
- Follow the on-screen instructions proved by HP to proceed installation.
HP LaserJet 1020 is an affordable monochrome laser printer for home users. If you have limited printing requirements every month then this is for you. For its price, it is a printer that delivers the job.
It comes with a 234 MHz processor and just 2 MB of on-board memory. The Processor and on-board memory are not the best among its competition. You can get a better configuration by spending $ 20-50 more.
The LaserJet 1020 measures just 370 mm (14.6 inches) wide, 242 mm (9.5 inches) deep, and 209 mm (8.2 inches) tall. It weighs a light 11 pounds and with 2000 page cartridge installed 13.0 lb. Samsung ML-2250 has a default 300-sheet capacity with a maximum of 550 sheets. Even HP's own LaserJet 1022, which is $ 20 dearer, holds 250 sheets.
One can keep 150 sheets of regular weight 75 g / m2 (20-lb paper) in the main input tray of the HP LaserJet 1020 printer. Its priority feed slot capacity is 10 sheets of paper up to 163 g / m2 (43 lb). The Top output bin can hold up to 100 sheets of regular weight 75 g / m 2 (20-lb paper).
It prints text a rate of 14 pages per minute (A4 Pages). The first page comes out in as low as 10 seconds. As compared to Samsung ML-2571N text printing speed is slow, while faster than. HP LaserJet 1020 printer uses a black cartridge (print cartridge number Q2612A) with 2000-page capacity.
If you have a problem / issue with HP Laserjet 1020 comment on this page, our experts will get back to you with solutions.