Samsung galaxy core 2 specifications. Information about the brand, model and alternative names of a specific device, if any

Width information - refers to the horizontal side of the device in its standard orientation during use.

Height information - refers to the vertical side of the device in its standard orientation during use.

Information about the thickness of the device in different units of measurement.

Information about the weight of the device in different units of measurement.

The approximate volume of the device, calculated based on the dimensions provided by the manufacturer. Refers to devices with a rectangular parallelepiped shape.

Information about the colors in which this device is offered for sale.

Materials used for the manufacture of the device body.

A system on a chip (SoC) integrates various hardware components such as a processor, graphics processor, memory, peripherals, interfaces, etc., as well as the software necessary for their functioning.

Information about the technological process by which the chip is manufactured. The value in nanometers is half the distance between the elements in the processor.

The main function of the processor (CPU) of a mobile device is to interpret and execute instructions contained in software applications.

The bit size of the processor is determined by the size (in bits) of registers, address buses and data buses. 64-bit processors have more high performance compared to 32-bit processors, which, in turn, are more productive than 16-bit processors.

Instructions are commands with which the software sets / controls the operation of the processor. Information about the instruction set (ISA) that the processor can execute.

The cache memory is used by the processor to reduce the time it takes to access more frequently used data and instructions. L1 (level 1) cache is small and is much faster than both system memory and other levels of cache. If the processor does not find the requested data in L1, it continues to look for it in the L2 cache. On some processors, this search is performed simultaneously in L1 and L2.

L2 (level 2) cache is slower than L1, but instead has a larger capacity to cache more data. It, like L1, is much faster than system memory (RAM). If the processor does not find the requested data in L2, it continues to look for them in L3 cache memory (if available) or in RAM memory.

The processor core executes program instructions... There are processors with one, two or more cores. Having more cores increases performance by allowing multiple instructions to execute in parallel.

The clock speed of a processor describes its speed in cycles per second. It is measured in megahertz (MHz) or gigahertz (GHz).

A graphics processing unit (GPU) handles computation for a variety of 2D / 3D graphics applications... V mobile devices ah, it is used most often by games, consumer interface, video applications, and more.

Like a processor, a GPU is made up of several working parts called cores. They handle the graphical computation of various applications.

Random access memory (RAM) used operating system and all installed applications. The data that is saved in the RAM is lost after the device is turned off or restarted.

One of the main characteristics of the screen is the technology by which it is made and on which the image quality of information directly depends.

On mobile devices, screen size is expressed in terms of the length of its diagonal, measured in inches.

Approximate screen width

Approximate screen height

The aspect ratio of the long side of the screen to its short side

Screen resolution shows the number of pixels horizontally and vertically on the screen. More a high resolution means sharper image detail.

Information about the number of pixels per centimeter or inch of the screen. Higher density allows information to be shown on the screen in clearer detail.

Screen color depth reflects the total number of bits used for color components in one pixel. Information about the maximum number of colors the screen can display.

The approximate percentage of the display area on the front of the device.

Information about other functions and features of the screen.

Information about the make and model of the sensor used by the camera.

Information about the type of camera sensor. Some of the most widely used types of sensors in mobile cameras are CMOS, BSI, ISOCELL, and others.

The optical format of a sensor is an indicator of its shape and size. Usually expressed in inches.

Pixels are usually measured in microns. Larger pixels are capable of capturing more light and therefore provide best shooting at low light and wider dynamic range than smaller pixels. On the other hand, smaller pixels allow for higher resolution while maintaining the same sensor size.

The rear (rear) cameras of mobile devices mainly use LED flashes. They can be configured with one, two or more light sources and vary in shape.

Information about additional software and hardware features of the rear (rear) camera.

Resolution is one of the main characteristics of cameras. It represents the number of horizontal and vertical pixels in the image. For convenience, smartphone manufacturers often quote resolutions in megapixels, indicating the approximate number of pixels in millions.

Information about the maximum video resolution that the camera can record.

Information on maximum speed recording (frames per second, fps) supported by the camera at maximum resolution. Some of the most basic video recording speeds are 24 fps, 25 fps, 30 fps, 60 fps.

Battery capacity indicates the maximum charge it can store, measured in milliampere-hours.

The type of battery is determined by its structure and, more precisely, by the chemicals used. Exists different types lithium-ion and lithium-ion-polymer batteries are most commonly used in mobile devices.

Talk time in 2G is the period of time during which the battery charge is completely discharged during a continuous conversation on a 2G network.

Standby time in 2G is the period of time during which the battery charge is completely discharged when the device is in stand-by mode and connected to a 2G network.

Talk time in 3G is the period of time during which the battery charge is completely discharged during a continuous conversation on a 3G network.

Standby time in 3G is the period of time during which the battery charge is completely discharged when the device is in stand-by mode and connected to a 3G network.

Information about some additional characteristics of the device battery.

The SAR level indicates maximum amount electromagnetic radiation to which the human body is exposed if the mobile device is held close to the ear in the speaking position. In Europe, the maximum SAR value for mobile devices is limited to 2 W / kg per 10 grams of human tissue. This standard was established by the CENELEC committee in accordance with the IEC standards, following the ICNIRP guidelines of 1998.

The SAR level indicates the maximum amount of electromagnetic radiation that the human body is exposed to if the mobile device is held at hip level. The highest SAR value for mobile devices in Europe is 2 W / kg per 10 grams of human tissue. This standard has been established by the CENELEC committee in accordance with the 1998 ICNIRP guidelines and IEC standards.

The SAR level indicates the maximum amount of electromagnetic radiation that the human body is exposed to if the mobile device is held close to the ear. The maximum value used in the United States is 1.6 W / kg per gram of human tissue. US mobile devices are controlled by CTIA and the FCC conducts tests and sets their SAR values.

The SAR level indicates the maximum amount of electromagnetic radiation that the human body is exposed to if the mobile device is held at hip level. The highest SAR value in the United States is 1.6 W / kg per gram of human tissue. This value is set by the FCC and CTIA monitors mobile devices for compliance with this standard.