Tm 7026 firmware 4.1 2. A budget tablet for the Ukrainian market. To access the Internet, the manufacturer provided a Wi-Fi module and support for host-mode, that is, the connection of external devices, for example

Hello dear readers. Today we will talk about the Russian budget texet tm 7016 tablet - made in China. We will not dwell on it for a long time and will immediately move on to the technical parameters.

Tablet specifications

it seven inch tablet with a resolution of 800x600 pixels, works on the basis operating system Android version 4.0.3. The processing and distribution of resources is handled by the Boxchip A13 microprocessor with operating frequency 1200 MHz, paired with 512 MB of RAM, internal memory only 4 GB, but thank goodness there is a slot for external card memory.

Appearance

There is only one 0.3MP rear camera. Optional built-in speaker, microphone, orientation sensor and accelerometer, what can I say - this is the same budget option.

To access the Internet, the manufacturer provided a Wi-Fi module and support for host-mode, that is, the connection of external devices, for example:

  • Modems;
  • Mice and Keyboards;
  • Flash drives.

The mass of a budget device is about 300 grams, dimensions are 193x121x9 millimeters.

The package bundle for a budget tablet is quite complete:

  • USB cable for PC;
  • Host cable;
  • Headset;
  • Tablet;
  • Manual, warranty card;
  • Charger.

Unpacking your tablet: https://youtu.be/l-FLbBaEg9Q

The appearance of the gadget

The reverse side of the device has a characteristic insert, which is very reminiscent of the well-known iPad. For those who have never worked on a tablet PC, engineers have applied a graphic designation of all available connectors and keys.

Backside

On the right side you will find a headphone jack, a jack for connecting charger, a USB connector and a slot for an external memory card, as well as an HDMI input for connecting to any devices with a similar connector.

Right side edge

As you can see, they have bolts on the sides, so be sure that he understands if something burns out or needs to be changed.

Top side edge

Traditionally, the top edge houses the on / off key for the tablet computer, the volume rocker and the mechanical return button.

In addition, back side made of metal - most likely aluminum.

External modem connections

As mentioned above, the tablet PC runs on Android 4, so setting up and operating the product will not take much time and will be intuitive.

Desktop

Standard desktop of an Android device

Application menu

A menu that displays all installed applications... We find the settings and click.

Setting up an external modem

As mentioned above, the tablet does not have a built-in 3G module, one has the ability to work with external devices. To do this, we purchase a modem, buy starter pack with internet (modern already built-in).

It is important to know, before buying, check the modem for compatibility with the device.

We connect and go to the settings / More / Mobile network / at this point we turn on the data transfer - this is very important, without this it will not work. Next Access point / Functions / Create a new connection point.

Mobile networks

In front of you there will be a whole list of fields that will need to be filled in according to your mobile operator - do not be alarmed right away, since you will have to fill in only four fields, such as:

  • Connection name;
  • Access point;
  • Username;
  • Password.

The name of the connection point can be anything, but the rest should be as it is written.

APN

  • For MTS: internet.mts.ru
  • BeeLine - home.beeline.ru
  • For Megaphone - internet
  • tele2: internet.tele2.ru

Username

  • for MTS: mts
  • BeeLine - beeline
  • Megaphone: empty
  • tele2 - empty

Password:

  • for MTS - mts
  • for BeeLine: beeline
  • Megaphone - empty
  • for tele2 - not needed

We check again for correctness, save and reboot the device. We turn on the data transfer again and use it.

To connect via Wi-Fi, you just need to turn on the module and wait until the area is scanned and connect to the selected point.

Wi-Fi connection

Device firmware

Before installation new firmware it should be soberly understood that everything that will be done in this paragraph is done at your own peril and risk, the administration of the site and the author does not bear any responsibility for all the consequences. Therefore, we recommend that you do not try to flash without the necessary importance and without any knowledge. Tablet PC- a better working gadget than a broken and invalid warranty card.

First, download the program for the LiveSuit firmware: http://w3bsit3-dns.com/pages/go/?u=http%3A%2F%2Ftexet.ru%2Ffiles%2FLiveSuitPack105_english_1352960642.exe

Download the necessary drivers for the tablet itself:

http://narod.ru/disk/64815553001.02962bc6c616a8c0bb9ac1c49bdc2d38/UsbDrivers.rar.html

After installing the program on a PC, a folder will automatically be created - UsbDriver, it is in this folder that we put the above drivers. Now you need to download the firmware itself for this we go to the manufacturer's website:

http://www.texet.ru/support/files/ or download it from unofficial sites, such as: w3bsit3-dns.com.

Instructions:

  • We launch the program for the PC;
  • Turn off the tablet PC and hold down the Volume + button;
  • We connect the device to the PC without pressing the volume key;
  • Immediately press the power key 3 times, while keeping your finger on the volume;
  • Now the computer will ask you to install the appropriate driver - select manual installation and go to the previously created folder with the driver;
  • After successful completion, turn off the device;
  • Now again we do 2-3 points and select the firmware in the program (graphic cube);

Program for firmware

  • In the window that appears, click "Yes";

Installing the firmware

  • Press yes again and wait for the end of the software update process;

Installation completed successfully

This completes the installation successfully, disconnect the tablet PC and turn it on - the process will take a little longer to load, this is normal.

Getting root-rights is not required, since the device is already rooted upon purchase.

Some problems and questions about operation:

  • What is the difference between Texet TM 7016 and 7026

The first of them is intended for the Ukrainian consumer, the second for the Russian

  • The tablet gets very hot

This is normal, it works - but you shouldn't load it too much (several dozen processes at once), it was made in China, and this says that the material and equipment are not of very high quality.

  • External modem does not work

Checking its performance on another device, checking if the cord is not damaged, as well as checking its compatibility with the tablet - this is very important.

  • Firmware is not installed

When connecting to the PC, try to hold down the power key and the Reset button (in the back of the microphone) until the computer is detected by the device.

Full review:

The majority of Android users are interested in flashing tablets for many reasons: you need to update the system or have a desire, or to return the device to working condition.

Many are not satisfied with the standard firmware on Texet TM7866

However, the process itself is quite simple, but differs depending on the manufacturer. We will look at how the firmware of Texet TM7866 and other models of the brand is performed, and how to do everything correctly so as not to harm the device.

What do you need to flash a Texet tablet?

First of all, let's find out what it takes to perform such an operation. Texet TM firmware is done using the following tools:

  • A charged battery - it is best if it is full or has a reserve of at least 50%;
  • Computer - it will be used for flashing;
  • PhoenixSuit software, through which the software is replaced - download and install it on your computer;
  • Directly - the file with it must also be downloaded and saved on the PC in advance;
  • Where can I get the firmware and the program to install it? It is best to look for them on the official website of the Texet manufacturer, navigate by the series marked with the letters TM. Files for replacement software are located in the "Support" section, then select "Downloads";
  • In the window that opens, you can find files with the program and the new Android image, but check carefully serial number your device to download the appropriate software archive.

So, when you have downloaded everything, install PhoenixSuit like this:

  • Open the installer, click "Next";
  • Windows will notify you that you need to install the driver, but it is unverified - confirm its loading anyway;
  • After confirming the rest of the items will happen, at the end click "Finish" and close the window.

You have now installed a separate program PhoenixSuit designed to replace firmware on Texet TM products.

How to flash a Texet tablet?

Flashing the Texet TM7024 tablet and other models is performed using the following actions:

  1. Once again, make sure that the gadget is sufficiently charged and open PhoenixSuit;
  2. Click on the Firmware section;
  3. In the window that opens, specify the path to the file with the system image in the Image line;
  4. If the tablet was turned on, turn it off and press the "Home" key;
  5. via USB, pressing the aforementioned key until a message appears with the text "Tips: Does mandatory format?";
  6. Answer the question in the affirmative, after which the replacement will begin software- you can watch the process directly in the application;
  7. At the end of the process, the message "Upgrade Firmware Succeed" will appear - just click OK.

You can now unplug the device and turn it on. By the way, the download will seem a little slow. This happens only at first, because the device is launched for the first time with new software.


In front of you detailed step-by-step instruction how to flash teXet TM-7026 tablet. Our editors have chosen the most suitable method for flashing this teXet model. If this instruction will not give a result try flashing another method: TWRP Recovery, ROM Manager, Fastboot or classic OTA.

A warning! After flashing the device, all your data from the internal memory will be erased, so to save your contacts, settings and applications, first save all data from the tablet.

Installing the system using CWM Recovery 1. Charge the flashing tablet at least 80%. 2. We save all data that cannot be lost from a flash drive, sim card and tablet memory. Simka (if any) can be pulled out. 3. We place the required firmware into the tablet's memory. The firmware file must be in archive format zip... You can select and download the firmware. 4. For everyone teXet tablets costs Recovery from the manufacturer, so we change it to ClockWorkMod Recovery. We do it according to the following instructions: Install the app from Google Play on your tablet. Miss it and provide Root rights. . Select "CWM Recovery" from the list of options. Then the application will show a list of available Recovery. In the example, Rashr showed 2 options: ClockworkMod with support for taps on the screen and the classic version (controlled by the volume and power buttons). You will be prompted to download. Click Yes. Then the download of the CWM Recovery image for the tablet will begin. A notification will appear that the firmware was successful and now you have a modified recovery installed. We immediately go into it, for this click "Yes". Ready. If you already have ClockworkMod Recovery installed, then just enter it by holding any of the combinations for 3-5 seconds: - Volume up + power button - Volume down + power button - Volume up / down + power button + "Home" - Volume up + volume down + power button 5. Movement in the Recovery menu is carried out using the volume buttons, and the selection is confirmed with the power button. Before installing the firmware, you must first do a factory reset. Therefore, in the menu, select the item wipe data / factory reset.
6. Then just confirm that you agree to reset: Yes - Wipe all user data.
7. Now in the main menu of Recovery select install zip.
8. Then select Choose zip from / sdcard.
9. Navigate to the folder where you saved zip file firmware and select it.
10. You will be prompted to confirm the action. Please select Yes - Install ....
11. The process of installing the firmware will begin and at the end the message will appear Install from sdcard complete. The firmware is complete. We return to the main menu of CWM Recovery and reboot the tablet. For this we choose reboot system now.
12. Ready. The tablet will start downloading with the already installed firmware. Other materials
Fitting © 2021 Tech Look - Gadgets. Android device. Antiviruses. Security. Graphics. Internet. Mobile devices