How to Install a Router Correctly: Best Tips and Ideas. How to properly install a Wi-Fi router in an apartment? Theory and practice Installing the router on the wall

Where to hide the router without losing internet speed? Our tips will definitely help you find the best place for this device.

Looking for the best place for a router

• When setting up your router, make sure that there is enough free space for wires. It can be frustrating if you find the perfect spot for your router and then can't plug in a new cable.
• It is especially important to choose the right environment: the place of installation should be neither hot nor cold. You should also avoid places with high air humidity and dust, which can significantly shorten the life of the device. If you are unsure what conditions your router can withstand, take a look at the instruction manual.
• The router should be located closer to the center of the apartment. Try to locate the device close to existing cable networks to avoid additional costs for new cabling.

Hiding a router without signal loss

• If you want to hide it, it is important that it is in the middle of the area that you want to cover with the WLAN signal. Improper placement of the receiver can result in decreased wireless speed or even loss of signal.
• Do not place WLAN routers in close proximity to heaters, refrigerators, etc. household appliances as it may interfere with distribution.
• It is very important that you can easily get to the router. You will probably sometimes need to turn off, turn on, or just restart the device - and it is better to do this without global permutations.
• Here are some practical ideas on how to hide your router. The first and the simplest one is to mount it on a mount in an inconspicuous place on the wall. Similarly, it can be attached to back side writing desk. If you have a tiered ceiling with revision holes in your home, try hiding it there.

Practice

To ensure the optimal level of signal reception in all rooms of your apartment (from 1 to 3 rooms) and adjacent rooms, follow a simple rule: the fewer walls between the router and your gadget, the better... If you think about how to achieve this result, you will quickly guess that very often optimal place to place the router is hallway or the corridor(although the layouts now, of course, are different).

Respectively, It is NOT recommended to post Wi-Fi router :

• In places with limited space - niches, behind cabinets, sofas, on a bookcase shelf, etc.
• Below - on the floor, under the table, and so on;
• Next to the appliances - TV, refrigerator, computer, microwave, home wireless radiotelephone. Maintain a distance of at least 1-2 meters;
• Near radiators and in any other places where the air temperature exceeds 40 degrees - otherwise the router will heat up and will not be able to cool down;

Yet helpful advice- put the router as high as possible, ideally - hang it on the wall or put it on a shelf at a height of at least 2 meters... This gives you perfect coverage. Wi-Fi networks in the apartment.

By the way, place the router as far away from you as possible… enough good for your health:). After all, even today, scientists and doctors have not come to a final conclusion about whether it is harmful wireless Internet for the body. But the facts that make us think at least have already been collected quite enough. For example, at one time the so-called. Copenhagen experiment Danish schoolgirls. In 2013, five girls germinated plant seeds for 12 days - with and without Wi-Fi radiation. As a result, the seeds in six trays in an isolated room grew normally, while their "buddies" who stood next to Wi-Fi routers could not grow. And a few sprouts turned brown and wilted at all! And in 2010, Dutch scientists tested trees for the influence of Wi-Fi. After three months of exposure Wi-Fi signal Ash trees "participating" in the study began to show signs of radiation sickness("Lead" reflection on the leaves)!

To keep up with the times, you have to acquire more and more new devices. It's no secret that Wi-Fi is very widespread these days. Each user of a wireless network should ask questions about how to properly install a router in an apartment, is the choice of a location important for the quality of communication? This article will help you find answers to these and other questions.

Installing a router in an apartment

Only at first glance, everything looks simple. The choice of a place in the apartment depends not only on the quality of communication transmission, but also on the safety of the device itself. A competent place will help protect the router from influences of any kind. Let's pay attention to the main nuances of the location.

Where cannot be installed?

Installing a router in an apartment should be done wisely. In order to avoid various problems, we recommend that you familiarize yourself with the list of tips that will help you understand where you should not put the device.

• Do not place the access point near devices that operate at frequencies corresponding to 2.4 or 5 GHz. The reason for these measures is simple: different devices having the same operating frequencies will in every possible way interfere with the correct operation of each other.

Important! Avoid wireless connections, microwave ovens, telephones and other similar equipment.

• Reflective surfaces will also interfere with the operation of the instrument. Near mirrors and other surfaces, the signal will noticeably deteriorate, if not completely lost.
• Keep a minimum of electrical appliances between your computer and the access point.
• Avoid installation in areas around which there are thick (load-bearing) walls. Such measures will help to avoid obstructing stable signal propagation.

By following these tips, you will achieve the best signal spread over the area. But what else should you pay attention to? Where is the best place to place a router in an apartment?

Harm

Some people think that constant exposure to Wi-Fi waves is harmful to the human body. Users do not recommend installing this appliance in the bedroom and living room. Believing such advice or not is only your business.

Installation height

Why do many advise choosing high places for installation? Everything is very easy. It is from the height that the wave will have a uniform distribution over the area of ​​the entire room.

It is quite difficult to install the router in the right place, since even the material of the walls affects the quality of the connection. Sometimes an indoor flower or an aquarium can become an obstacle.

Is it possible to amplify the signal?

Do you want to increase your coverage wireless network internet, but not ready to pay big bucks for good equipment? There is a way out here as well. In hardware stores, there are an abundance of devices that are called "repeater".

The peculiarity of this technique is that it does not require the connection of any wires. You just need to plug this device into the power grid in the place where the point is still available. Wi-Fi access... The repeater receives and amplifies the signal from the router. Thanks to this feature, you will be able to cover even the most distant point in your apartment with a network.

Where to install a router in an apartment with pets? Read on!

Animals and heating appliances

If you are a pet lover, then you should pay more attention to router installation. The device must be isolated from animals, whether you have a dog, a parrot or a cat. Most animals are very playful and can bite whatever they come across. Such fun can end up with your pet being able to:

• Damage the power cord.
• Damage the cable from the internet.
• Damage the router itself.

Important! Heating systems also require special attention, namely: do not choose a place for the access point near heating devices, since overheating can lead to a breakdown of the device, and you will be forced to repair the gadget at your own expense.

When performing work in small offices, you often face the need anchor abandoned equipment on the floor, often lying underfoot, somehow tucked in by folk craftsmen in the most bizarre places. For example, you can find this (see photo), a familiar picture? :)

We put things in order.

We mount the router to the wall in a few minutes.

We need quite a bit - a sheet of paper, a pencil, a couple of screws and a screwdriver for them. If the wall is made of plasterboard, and now such walls prevail in offices, then nothing else is needed.

Place the device with the back facing you, put a sheet of paper on it, take a pencil and go over the sheet of paper with a pencil over the holes in the plastic for the screws.

So you can easily get points for mounting the device on the wall without a ruler, in fact - the simplest template. Pierce the paper in the necessary places, position the sheet on the wall and through the holes leave marks with a pencil on the wall in the places where you will need to screw in the screws. Install suitable screws and fix the device to the wall.

It takes very little time. The number of failures in small networks is reduced by an order of magnitude. Cable removed from the floor does not interfere with the cleaning lady from cleaning the office, and the staff very rarely touches him with their feet, respectively, the connectors, plugs, sockets remain intact.

Drilling the wall to mount the router, switch.

Sometimes drilling is indispensable, and there may not be a vacuum cleaner in the office. There is no need to leave behind a “gift” for the cleaning lady.

Today we will give a couple of tips on where to install a router in an apartment: how and where it is best to install it, which solutions are best to avoid altogether, and how to secure your network as much as possible.

Decisions to Avoid

First you need to adhere to these four rules that determine where to install the router in the apartment will be a mistake:

Now that we have figured out where are not the most favorable places, let's move on to the standard tips on where to place the router in the apartment for the strongest signal in all rooms.

Places of the right choice

The first thing worth mentioning is that the higher the dispenser is installed, the better. The ideal option would be to install it on the wall. If the question arises of how to fix the router on the wall, then everything is easier than you might think: nothing needs to be drilled, since devices often have special grooves on the case for mounting on the wall.

To take advantage of this opportunity, it is enough to measure the distance between the grooves, mark the place where you think it is optimal to install the router in the apartment, and then drive in a couple of nails in the right places almost to the end. You can also buy a couple of plastic dowels and make the holes slightly smaller in the necessary places - by placing the dowels in the wall, you can screw screws with small caps into them and hang the router on them.

If you don't want to punch holes in the wall, then your obvious answer to the question of where to place the router in the apartment is the closet in the corridor.

The second thing that is really worth paying attention to in this case, this is the position of the antennas: the best way when they stand upright. If, despite this, you have a bad signal, it is still worth trying to change their position and see if this improves the situation.

These are the main two tips on how to properly install a router in an apartment. If you rely more on the principle of maximum network security, then it is best to place it in the center of the apartment - this will reduce the possibility of intercepting your signal outside of it. For special conspiracy, you can screen the necessary premises, but these are measures for the most serious.

Should I put the router in the dashboard?

There are often tips for installing a dispenser in a low current box. At the request "dashboard for a router in an apartment", the search engine gives out a lot of information and opinions that are opposite to each other.

In this situation, we can say this: if you want to put the access point there, then the shield should not be metal in any way, otherwise there is no point. It is interesting that in some cases the option with a metal shield works, but only if the shield is built into the wall of foam blocks.

Well, if you do not take these two features into account, then the main principle in choosing where to install a Wi-Fi router in an apartment is to install it outside, no matter how it looks. You can sacrifice either beauty and neatness or Wi-Fi signal.