New iPhone color options. iPhone X, will there be new body colors

Even eminent Apple equipment periodically fails. Today we will talk about a common problem with which many users run to services - the iPad does not turn on (relevant for all versions 1,2,3,4, Air, Mini, Pro). You press the power button, and the screen remains black or seems to work, but immediately turns off.

Some malfunctions can be repaired by hand. Carefully study this instruction, if you have any questions, ask in the comments below or squeak in the social. networks.

To get started, just make sure that the battery is charged enough to power the tablet. So grab your iPad, the original lighninng cable and a wall charger that delivers at least 1.5-2 A and a voltage of 5 volts (the specifications are written on the case in small letters). Only with such a current can you "push" the battery. We'll be back to the process in at least 30 minutes. If everything works, an apple will appear on the screen and iOS will load, if it doesn’t help, read on.

You can try charging your iPad by plugging it into a USB port on your desktop computer. On laptops, the current is usually less than 1.5A, so do not try this option.

Be sure to inspect the wire for creases, kinks, marks from pet teeth, and other obvious damage.

Ideally, make sure your available Lightning cables are MFi certified. Usually at your local store or gas station, you can buy Chinese non-MFi certified cables, which are of lower quality than the original.

They have thinner conductive wires, more brittle braided plastic, soldered "crooked" chips, and so on. In rare cases, the use of Chinese "crafts" leads to damage to the internal electronic components of the device.

Usually iPad, iPod and iPhone will warn about an uncertified or damaged cable by displaying the message "This accessory may not be supported."

Try turning it on again

If you've tried to charge your iPad and it doesn't turn on automatically, try turning it on yourself.

Press and hold the power button (at the top) to turn on the gadget.

After a few seconds, the Apple logo should light up. This means your tablet is starting up and should be ready to go in a few seconds. If nothing happens, then follow the instructions further.

Force restart your device

crash software is a common problem that happens to many users of products from an American electronics manufacturer. The best way the fix for this is to perform a forced restart (popularly referred to as a "hard reboot").

Press and hold both the Home button and the Power button (top) for at least 10 seconds until the Apple logo appears on the screen.

This method helps with freezing on the "apple", with hard system "glitches" and other situations when the tablet does not respond to keystrokes and touching the screen.

Now it's time to inspect the charging port. Take any flashlight and carefully inspect the lightning connector. Look for dirt, debris, lint that might prevent the Lightning cable from making a direct connection to the pins.

Inside the connector there are eight small metal contacts, with the help of which charging takes place. As long as one of the contacts is dirty, the battery will not receive energy.

Check charger and cable

If, after manipulation, the iPad does not turn on, try charging the gadget using a different cable and charger.

Ask your parents, your siblings, or any of your friends if you can borrow their iPhone (or iPad) to try charging it with your own cord and charger. If your cable or power supply does not work with a "rented" iPad or iPhone, then you have already found the problem! You need to buy a new charging cable.

However, if you find that the wire works with their devices even though it doesn't work for you, then it means something is wrong with your device, not the charging cable. We dig further.

Trying to restore iOS

So if you are reading here, then the instructions above do not work. Now it's time to try to fix software errors. iOS, like other operating systems (Android, Windows), crashes on tablets - crashes. Because of this, the iPad does not turn on (relevant for all models: 1,2,3,4, Air, Mini, Pro), the apple lights up or asks to connect to iTunes. If the iPad asks iTunes, something happened with the activation, more about this here, in this article we are talking about something else.

There is a so-called DFU mode that allows you to reflash the gadget even when it is not working.

This is the deepest iOs recovery method. In the process, directly into the non-volatile memory is poured new firmware, restoring the original state operating system. When you restore iOs with DFU, there is always a chance that something will go wrong.

ATTENTION! If the iPad is mechanically damaged, the screen is broken, there are obvious jams on the case, or traces of water, DFU recovery will lead to total loss performance. Run to the service center, you can't help here on your own.

Instruction:

Step 1. Connect the USB cable to your computer and iPad. Make sure your iTunes is installed on the system on your computer.
Step 2: Now press and hold the Power button (at the top) for 3 seconds.
Step 3: Keep holding the Power button and also press and hold the Home button.
Step 4. Hold both of these buttons for 10 seconds. If you see the Apple logo, then you've been too long. Don't worry, just go back to step 1 and try again.
Step 5: Release the Power button but hold the Home button for 5 seconds. If you see the "Connect to iTunes" screen, you're holding on too long again. Go back to step 1 and try again.
Step 6. iTunes will detect the iPad and offer to restore iOs. All you have to do is just follow the on-screen instructions (it's just a few quick, easy steps).

complete procedure and step-by-step instruction described in this article.

Mechanical damage

Consider the common causes of breakdowns that interfere with normal operation.

Loose cable from board

This usually happens after a blow or a fall. If the iPad does not show signs of life after a strong mechanical impact, in 80% this means that the cable of the battery, screen or other elements has moved away from the board.

To fix the problem you will need:

Straight arms, as you have to open the case.
Screwdriver type Pentalobe.
Plastic thin card (a credit card or a guitar pick will do).
Suction cup with handle.
Instructions for disassembly and assembly.

All Apple appliances are assembled with small pentagonal screws. After parsing and removing the cover, you need to check all the cables for contact and fix those that go to the battery and screen.

Crack on the motherboard

As a rule, this situation is not treated. Motherboard- the basis of the tablet. If there is a crack, then the contact tracks are broken and you will have to change the entire module or reanimate it for a very long and expensive time. It's easier to sell the device for parts and buy a new one.

battery died

If the iPad has served faithfully for more than three years, most likely the battery has died and because of this there is no start.

To diagnose the battery, you need a multimeter. Having attached the contacts to the multimeter, the device should show at least 3 volts, if the value is less than 1.5-2 volts, the battery is a corpse, there is only a replacement.

Moisture got in

Moisture causes oxidation and damages contacts. In the early stages, the oxide film on the insides can be wiped with alcohol, but most often the board is repaired for a lot of money. But most likely, you will receive a refusal to repair, as this is not advisable.

To check if the tablet has been damaged by water, carry out a visual inspection according to the checklist:

Has liquid entered between the layers of the screen?
Are all buttons working?
Check the speaker grille at the top and bottom of the case. Is there moisture in there?

If the damage is minor, Apple's warranty shop may ignore it and will likely replace the iPad if it's under warranty.

But if there is significant liquid damage, then the warranty does not cover water damage, unless you have AppleCare+, which even then will cover the costs.

If you find that the tablet is in excellent condition, but it still won't turn on, then read on.

Power controller burnt out

A rare problem in which the tablet will have to be disassembled. An understanding of microcircuits and the ability to solder will come in handy. You also need to understand microelectronics and understand where the contacts and other critical details are.

There are two exits:

follow the instructions in the video below;
take it in for repair.

Question answer

Let's analyze the most FAQ, which are set by users of all versions of Apple tablets (1,2,3,4, Air, Mini, Pro).

Indicates charging but not charging

This means that there is not enough power from the power supply or the cable is not original, torn or broken.
The battery has died. Read more about battery diagnostics.
The problem might be with the charger you are using for your iPad. If the power supply outputs less than 4.5 volts or more than 5.5 volts, the software or chip in the cord will detect the mismatch and stop charging. This is due to the fact that large current drops are perceived as a safety hazard.

Logo appears and disappears

It still crashes blue screen. Treated by flashing to DFU mode. detailed instructions a little higher.

No sign of life after update

Again, try flashing in DFU mode.
During the update process, the discharge “to zero” occurred, we charge the frog directly or hands to the feet and run to the master, enough destructive actions from you.

If it has been lying for a long time and does not turn on

Perhaps the battery was completely discharged and grabbed a "deep discharge". For resuscitation, you will have to open the case and take out the battery in order to charge it with the help of a "frog", more details. Or contact the service center.

Won't turn on after drop

After a serious mechanical impact, the device stops turning on, charging, the backlight, touchscreen may not work (the sensor stops responding to pressing), the Home button, volume, sound, Bluetoth, geolocation (GPS), Internet, WI-FI. For repair, you need to inspect the loops, check the contacts as in the instructions described above.

Gets hot and crashes

Apparently, some application has hung, heavily loading the processor with a looped task. The protection system prevented the processor from overheating and turned off the tablet. Wait 20-30 minutes and turn on the device again. If glitches start after that, the firmware will help again.

Says Connect to iTunes

This happens if the activation has failed, you need to connect it to the computer when iTunes help, then carry out activation already in the program.

Connect your iPad to your computer with iTunes.
A message pops up stating that iTunes has detected a device in recovery mode and "there is a problem" with the device "that needs to be updated or restored."
You will need to perform a "recovery", in which latest version iOS software will be downloaded from Apple servers and installed on the device.

The process will destroy files and data in memory, but they are no longer available if the tablet does not boot. You can recover data from backup iCloud later.

If nothing works here, then your iPhone or iPad problem with equipment. If it is still under warranty, take it to the nearest Apple Store(or just contact Apple) and ask them to identify and fix the problem for you.

Conclusion

iPad won't turn on if:

ios crashed,
the cable on the board came unfastened,
a crack has formed on the motherboard,
liquid (water, beer, juice, etc.)
battery died,
clogged power connector
the power controller burned out.

If, after applying our tips, the equipment still does not turn on, the problem is clearly in the hardware and it's time to look at the service center at the nearest Apple Store. You can contact the service Apple support for help and instructions if you're not near an Apple Store or Authorized Service Provider. Even if there is no warranty on it, the masters will repair the tablet for a fee.

Video

In fact, he is the chief editor of the entire site, always in touch with the best authors. Correction and proofreading, his work. An excellent expert in his field. Excellent understanding of the technical nuances of electronics. Occasionally writes and publishes original articles.

published articles - 15
readers - 3 179
online since September 5, 2017

Sometimes iPad owners face a problem when the device does not turn on or the apple icon just lights up on the screen. There are several reasons for a possible breakdown, some of which can be solved at home without contacting a service center.

The problem with turning on the tablet can be caused by several reasons: the breakdown of any internal component or a failure in the system. In the latter case, simple actions that do not require opening the device can help.

Option 1: Charging

The first and most common reason why the iPad does not turn on is low charge battery. The tablet just turns on for a fraction of a second, the Apple logo appears on the screen, then everything goes blank. In this case, the low battery icon may not appear, the user will only see a black screen.

The solution is very simple - connect the iPad to the network using a charger and wait 10-20 minutes. During this time, the battery will be able to consume enough energy for further switching on. Then restart your iPad.

It is important to connect the iPad to a power source only through the "native" charger. If possible, do not use chargers from iPhones and others. iPad models, as well as any analogues. Often they overheat the tablet, and this can cause the tablet itself to break. In the screenshot below, you can compare what the iPad and iPhone adapters look like.

If, after 20 minutes of charging, the iPad still does not turn on, check the operation of the USB cable itself and / or the outlet. Connect another phone or tablet with them and see if it charges. If yes, move on to other solutions to the problem.

Restarting the tablet helps many users with software failures, since in the process the system is cleared of unnecessary data, thereby preventing further failures and eliminating previous ones. It can be performed different ways, but in our case we will have to use the so-called "hard" reboot. We have described how to do this in Method 2 next article.

Option 3: Restore iPad

The most radical solution to the problem when the iPad is not turned on is to flash and restore it. In addition, this option is the last one that the user can apply at home.

Please note that creating a backup at this stage is impossible, so if it was not created automatically or manually shortly before the breakdown, then the user runs the risk of losing all files without the possibility of recovery.

In a situation with a non-working tablet, only iTunes help you reset your iPad and set it up like new.

Option 4: Fix iOS bugs

Another way to restore iPad is to use third party program, which allows you to fix iOS device errors, and DFU mode. Using this option, the user will not lose important data. In this article, we will consider working with dr.fone.

Option 5: Repair

The solutions described above for solving the problem with the inability to turn on the iPad are only suitable if the tablet has not been subjected to mechanical damage. If, for example, a fall or moisture ingress could damage the components of the device, which led to failures.

We list the main signs by which the user can understand that the problem is a malfunction of the "insides" of the iPad:

Flashing screen when turned on;
Before the image fades, noise, stripes, etc. are observed;
The apple icon that appears is a fuzzy white color.

Today we have analyzed why the iPad may not turn on and how to solve this problem on our own. However, in a situation of mechanical damage, it is worth contacting a specialist.

Cases when iPad Air does not turn on are really incomprehensible to users. Therefore, it is important here to find out the cause of the problem, which can be either software or mechanical.

Moreover, if there was no damage or falls of the devices, then the problem is software in nature.

Important!!! In order to avoid more serious breakdowns, contact professional service centers and workshops for repairs, where craftsmen daily face the repair of such gadgets.

Reasons why iPad Air won't turn on

The tablet might freeze. Try to force it reboot. To do this, simultaneously press home button(Home) and button turning on the iPad Air (at the end). Hold them for about 15 seconds. If after that the tablet does not turn on, we know we continue to look for the problem further - it's not about freezing.
Impact on a hard surface that caused internal damage to the components and modules of your tablet. Here, professional diagnostics will be needed to determine the specific damaged node.

One of the reasons why your iPad Air won't turn on may not be working button turning on the tablet. To determine this breakdown, you need to put the tablet on charge, as a result of which a graph with the charging process should appear. Appeared? So the problem is in the power button. If it does not appear, we continue to look for the cause further.
Display damaged. Your iPad Air appears to be on, but the screen is black. IN this case both the display module itself (display + touchscreen) and the connecting cable can be damaged. It is better to entrust such work to the masters.
iPad Air won't turn on not charged. Here, the breakdown may be on the side of the tablet itself (the socket or the entire charging module is damaged), or there may be problems with the charger or cable. Try connecting another charger.
Did moisture get into your tablet by any chance? This factor may be the reason why your iPad Air does not turn on and does not show signs of life. We do not recommend drying it yourself with a hairdryer, because. damage the tablet permanently. You need special equipment that will allow you to process all the internal elements of the tablet and prevent corrosion.

In fact, there are many reasons why your iPad Air does not turn on. Some you can define yourself, and the rest will require special knowledge, tool and experience. Now the majority service centers perform diagnostics of breakdowns of various gadgets for free. So seek help from a pro. This is our advice.

Articles and Lifehacks

Problems with any, even the most reliable equipment - the situation is common. Why won't my iPad turn on or charge?

In fact, the cause may not necessarily be related to a breakdown, and in most cases the problem is easy to fix in the first few minutes.

First steps

If the tablet does not respond in any way or freezes, you should first try to force a reboot of the device.
We hold down the power button of the device and the "Home" key at the same time for 5-10 seconds, until the familiar "apple" logo appears.
If the tablet still fails to load, you should put it on charge for half an hour or an hour.
In the event that on iPad screen If the image of the battery with the charge level does not appear, it is recommended to check the USB cable, the charger adapter and the connector where the latter is connected.
You also need to make sure that everything is securely connected, not clogged or damaged. If you have another USB cable, you should try using it.

If the iPad can be turned on, but it does not boot up to the end, hangs, and so on, it is recommended that you do the following.

We connect the tablet to the computer and open iTunes.
We perform a forced reboot by holding the "Home" and the power button.
When the Apple logo appears, you don't need to release the keys. On the contrary, the buttons must be held down until the recovery screen appears.
Select "Update". Now iTunes will try to update the system without deleting the data.
Perhaps after that the problem will be fixed.

If nothing happens after 15 minutes, you can try the above steps again with connecting and using iTunes.

If nothing helped

If the problem still persists, it's best to contact support. Then it will be possible to agree on the service repair of the iPad.

It also happens that the screen works, but does not respond to touch in any way. Often the latter happens after a system update, or even after a forced reboot of the device, the order of which is described above.

Another unpleasant situation is that one of the physical buttons is faulty. In this case, it will not even be possible to force a reboot of the tablet, and therefore it is better to immediately contact the specialists.

Categories

Popular