How to enter safe mode wines 10. Enter safe mode using the SHIFT key

In Safe Mode, the OS loads the minimum set of system files, drivers, services required to start and operate the system. Boot of this type is used to diagnose a computer (laptop) and troubleshoot various problems.

The Safe Mode tool comes in three variations:

Standard - starting the system with minimal set elements of Windows.
With the loading of network components - in addition to the standard version, network drivers and services are loaded, which are necessary for accessing the Internet and other computers on the network.
With Cmd - the command line will be launched instead of the graphical shell.

If you are not an IT professional, do not use option 3, but select mode 1 or 2 depending on the problem encountered. In the material, we will study how to enter safe mode Windows 10 with several methods on a computer ( Asus laptop, Acer, Lenovo, HP).

Entering Safe Mode through the system configuration window

In type msconfig, then click OK (Enter). This will open the system configuration window.

Click OK. As a result, a warning about the system restart will pop up, click "Restart". After restarting, you will be taken to safe mode.

Important! After working in this mode, go back to the system configuration and uncheck the "Safe mode" option. Click OK, restart your PC.

Launch Safe Mode via Special Boot Options

In this method, we will consider 4 situations in which special boot options open, and of which Safe Mode is enabled. Situations 3 and 4 are used when Windows 10 cannot start.

1. The combination Shift + reboot. From the Start menu, press the power button. Hold down the Shift key and hold it down. Then click on "Restart".

Note: A Shift Reboot can also be done from the login screen.

2. Special boot options in Windows settings... Press + I to open the options. Move to the "Update and Security" item.

Select "Recovery" on the left. In the area of special boot options, click on "Restart now".

3. Launch from the recovery media. Boot the USB drive created using the Create Recovery Drive tool from the Boot Menu. Next, select the Russian keyboard layout.

4. Interruption of the download process. When Windows 10 fails to start several times in a row, it turns on automatic recovery... If this does not happen, then this mode can be called manually. During OS startup, when the Windows logo is shown, hold down the power button until the PC (laptop) turns off. Then turn on the computer and repeat the shutdown procedure again. Do this 2-3 times. When everything works out, you will be transferred to the automatic recovery preparation screen with subsequent diagnostics. Wait until the screen for selecting automatic recovery options appears, where select "Advanced options".

All the 4 situations above will lead to the opening of special boot options. To enter secure windows mode 10 do the following.

Go to the troubleshooting section.

In diagnostics, open advanced options.

In the additional parameters, you will need to select "Boot options".

In the download parameters, click on "Restart".

Wait for the restart to occur. Before you will be 9 launch modes. We are interested in numbers from 4 to 6. Depending on the option for starting safe mode, press the F4, F5, F6 buttons.

Enabling safe mode using the command line

On behalf of the administrator in a convenient way for you. When it is not possible to start the system correctly, boot from the USB installation media (disk) with Windows 10.

Select Russian by clicking "Next". Click the System Restore link.

Navigate sequentially to the troubleshooting (diagnostics) section, advanced options. On the Advanced Options screen, select Command Prompt.

In Cmd, type the bcdedit command by clicking Enter. Pay attention to the block “ Booting Windows"By remembering the identifier. It is usually named (current), but when you run Cmd from the installer USB stick, the identifier is named (default). Be attentive.

How to start Windows 10 Safe Mode via Cmd? Use the required command with your ID. After writing the command, press Enter.

Standard Safe Mode:

With network drivers:

bcdedit / set (ID value) safeboot network

With Cmd support. First, we enter the first command, then the second command. Do not forget to click Enter after writing each command.

bcdedit / set (ID value) safeboot minimal

bcdedit / set (ID value) safebootalternateshell yes

To start the OS in normal mode, use.

bcdedit / deletevalue (ID value) safeboot

If you are in Safe Mode with Cmd support, then after entering the command above, use another additional command.

bcdedit / deletevalue (ID value) safebootalternateshell

For example, to load the standard safe mode, having the identifier (current), the command looks like this.

Restart your computer (laptop). If using Cmd from a USB installation drive, close the command prompt. From the action selection menu, select Continue to reboot and launch Safe Mode.

Enabling the call of additional boot options with the F8 key

Called from a special section additional options boot, invoked by pressing the F8 button before starting the system. You will not be able to enable Safe Mode on Windows 10 from the F8 menu, due to its disabling and fast system startup (UEFI BIOS + SSD). It is possible to disable quick start in the UEFI BIOS and enable the F8 call menu. If you have a classic BIOS, skip the BIOS steps below (steps 1-3). Follow these steps.

bcdedit / set (ID value) bootmenupolicy Legacy

Where, instead of "identifier", enter your value, which you learned in step 6.

Click Enter.

For example, the command in our case will look like the screenshot below.

Now press F8 quickly before loading Windows 10. Next, we get to the menu, where with the arrows we select the desired Safe Mode option.

Now you know how to enter Windows 10 Safe Mode different options... You can also use this troubleshooting tool when different situations, whether it is launching from the OS itself or turning on with bootable flash drive Windows 10 when the system fails to boot.

In Windows 10, Safe Mode is used to solve many problems associated with third-party services, programs and drivers that interfere with the correct operation of the system. In this article, we'll show you how to enter Windows 10 Safe Mode. different ways and options that are convenient for each user.

Introduction

Safe mode- this is a diagnostic state of the system, in which the minimum number of services and applications are running for correct Windows work. Third Party Applications, antiviruses, services and drivers will not work, so as not to interfere with the identification of the error and its elimination.

There are many reasons for Windows startup 10 in safe mode:

Problems with loading Windows - the system does not boot, an attempt to log into your profile turns into a long boot, the PC constantly reboots or a black or blue screen appears. Booting Windows 10 in Safe Mode can help resolve this issue and pinpoint the root cause;
System hangs, brakes and performance degradation.
Doesn't start or doesn't work system applications or service
Checking the operation of drivers and hardware on "basic drivers"
and many other reasons, entering Windows 10 Safe Mode may solve

We've covered the reasons for using it, and now let's move on to ways to enter Windows 10 Safe Mode.

Login Methods

Via Windows Settings

Options to enter secure Windows mode 10 is quite a lot, they may be similar to each other, but you never know which of these methods can be useful in one case or another.

And we will start from the very simple option, which is available to every user who boots Windows 10 - using Recovery Mode (WinRE).

The PC will reboot into recovery mode. In it, select the following parameters "Diagnostics> Advanced options> Boot options> Restart."

The computer will restart again, but you will be presented with a list of available OS boot options

If you need to boot into normal Windows 10 safe mode, press the 4 or F4 key.
If at the same time network services ( the local network or Internet), you need to download Windows 10 in safe mode with support network drivers, to do this, press the 5 or F5 key.
Wait a little while the necessary parameters are loaded and after a few moments Windows 10 will restart in Safe Mode.

Through the Shift key and reboot

This option, how to boot Windows 10 Safe Mode, is slightly different from the previous one. Windows 10 - For more flexibility, there are several options for launching applications or system services.

You can restart Windows 10 in safe mode using only 2 steps:

After that, the system will boot into WinRE and further actions are indicated in the previous version.

And we will show you more options available for each possible case.

Through the Shift key and reboot, but in a different way

For example, when you log in, it freezes or a black screen appears. What to do in this case?

In order to start in Windows 10 Safe Mode, you do not need settings or the Start button. For this, the login screen is sufficient - a window for selecting a user and entering a password.

You can, as in the previous version, press the Shift key and restart the device to get into WinRE.

But if your system boots immediately without the welcome screen, press the Win + L key combination to lock the system and return to the welcome screen. Even through this window, you can restart the OS in Windows 10 Safe Mode

Through WinRE (if the system does not boot)

There are also cases when the system does not boot at all - it reboots, freezes or a blue screen appears. And in this case, Windows has the option of how to enter Windows 10 Safe Mode.

Previously, in Windows 7 / Vista / XP, to start the recovery screen on reboot, you had to press the F8 key. In Windows 8 / 8.1 / 10 systems, this feature is disabled by default, but slightly different functionality is used.

This requires 3 forced computer restarts.

It is advisable to perform a forced reboot at the stage of system boot by pressing the power off key of the device. After that, the system should go to the recovery screen, from where you can continue your journey (see option 1).

Also, the recovery window may appear in case of an erroneous boot - an unexpected shutdown, a blue screen, or even a reboot of the PC through the BIOS.

If rebooting does not help, try the on / off cycle of the device by long pressing the power key. Make sure that this is done during the boot phase of the system in order to interrupt it and bring up the necessary recovery window.

As in Windows 7 (via the F8 key)

If constant system reboots are not for you and you are used to working with F8, then all is not lost. Until now, many users who are accustomed to older systems (Windows XP / Vista / 7) ask themselves the question “For Windows 10, how can you start safe mode using the F8 key”. In fact, everything is simple, this will require:

Launch window command line- in the search box (Win + S) enter CMD and run the application as Administrator
In the new window enter the command

bcdedit / set (id) bootmenupolicy legacy

In place (identifier) should be the value of your system. By default, this is (default) or (current). You can check your ID by entering the bcdedit command in the command prompt window.

Close the window and restart your computer

Through system configuration

We have looked at all the possible ways to run Windows 10 in safe mode through WinRE. But also, you can use and standard settings System Boot - System Configuration Application.

In order to get into Windows 10 Safe Mode the next time the system boots, follow these steps:

Click on the combination Win + R to launch the "Run" window and enter the command msconfig

Open the Start menu and in the search box (Win + S combination) enter the combination "system configuration"
After starting the window, go to the tab
In field "Boot options" check the box "Safe mode" and select “Minimal” or “Network”.

Click the OK button and reboot the system

This launch option Windows computer 10 in safe mode when the system is turned on is different from the above. If in the previous methods - the launch occurred once - the system after the reboot was booted in a normal state, then the option through the system configuration includes a permanent transition to Windows 10 safe mode and must be disabled.

Through the command line

Well, one more option that will help open Safe Mode on Windows 10 through the command line.

Using this method, you can add in one line to Windows bootloader information about the priority of the loaded system mode. To use this method, follow these guidelines:

Launch a command prompt window - in the search box (Win + S) enter CMD and run the application as Administrator
Enter the command:

bcdedit / set (id) safeboot minimal- standard

bcdedit / set (id) safeboot network- with support for network drivers

In place (identifier) should be the value of your system. By default, this is (default) or (current). You can check your ID by entering the bcdedit command in the command prompt window.

Then reboot

If when using this method, you cannot return to standard Windows operation, then you will need to remove the entry from the bootloader with the following command:

bcdedit / deletevalue (id) safeboot

In this article, we talked about 8 ways to enable Safe Mode on Windows 10 on a laptop or PC. We hope that these options helped in solving your problem, but if you have any questions or difficulties, we will be happy to help you in the comments.

Windows 10 Safe Mode is used to troubleshoot various problems... It is launched when the system is unstable, during virus removal, when new drivers are installed. This mode will allow you to find out the reason for the appearance blue screen"of death".

How do I enter Safe Mode?

Prior to the release of Windows 8, it was possible to enter Safe Mode by pressing the F8 key on the keyboard during a system reboot. But in newer versions there are several options for enabling this mode.

Using the Msconfig utility

Press the Win + R keys to open the Run window:

Run -> msconfig -> System Configuration -> Boot

Important! If you check the box on "Safe Mode", the system will start to boot permanently only in this state. To establish a standard boot, go to "System Configuration" again and uncheck the box, then restart the PC.

Video

For more information on how to exit Safe Mode on a Windows 10 computer, see the video.

From the Command Line

Run Command Prompt as System Administrator. Run the command: bcdedit / copy (current) safeboot minimal.
Reboot your computer. It can be done in a standard way, or from the Command line using the command: Shutdown –f –r –t 0. After that, Windows 10 will always boot in Safe Mode.

Healthy! In order for the startup method selection dialog to appear during the reboot, you need to enter the command in the Command line: bcdedit / set (default) bootmenupolicy legacy. To revert to standard boot, enter bcdedit / set (default) bootmenupolicy standard.

During computer restart

Using a bootable disk / flash drive

This method is used if Windows 10 does not start on the computer at all. Create on another device boot disk or a USB flash drive, then follow all the steps that you do when reinstalling the operating system. In the window for selecting language options, click Next.

In the next dialog box, run System Restore. After that follow the path:

Enter the command: bcdedit / set (default) safeboot minimal. After completing it, close Command Prompt and click "Continue". The computer will automatically restart in safe mode.

Output

To increase the startup speed of Windows 10, it has disabled the ability to enter Safe Mode during a PC restart. There are several ways to enable the function, as described above and shown in the video. According to the editorial board, the best option- using the Msconfig utility.

I will show you how to boot into Safe Mode on Windows 8. Safe Mode in Windows 8 is needed so that if Windows does not load normally, then you can boot into Safe Mode and check HDD or go online and look for a solution to the problem or fix not correct start system or disable components that interfere with startup.

There are several ways of safe mode in Windows 8.

Method 1 - Windows 8 Safe Mode using the SHIFT key.

We move the cursor to the lower right corner of the screen, then raise the cursor and select the parameters.

Now click on shutdown.

Now hold down SHIFT and press shutdown and

After a few seconds, the Select Action menu appears.

Proceed. Exit and using windows 8.1
Diagnostics. Recovering your computer, returning your computer to its original state, or using additional tools.
Turn off computer.

Choosing diagnostics.

Restore. If your computer is not working properly, you can restore it without losing your files.
Return to its original state. Your files will be deleted.
Extra options.

Choosing additional parameters.

System Restore. Windows recovery using a restore point.
System image recovery. Recovering Windows using a system image file.
Startup recovery. Troubleshoot problems preventing Windows from loading.
Command line. The command line can be used for advanced troubleshooting.
Boot options. Configuring Windows Boot Options.

We select the download parameters.

Reboot your system to:
- enable video mode with low resolution
- enable debug mode
- keep a boot log
- enable safe mode
- disable mandatory driver signature verification
- disable early launch of anti-malware driver
- disable automatic reboot on system failure

Click restart.

A menu of nine download items appears.
Boot options. Press the appropriate key to select from the following options: use the number keys or F1-F9.

1) Enable debugging
Windows boots in advanced diagnostic mode for system administrators.

2) Enable boot logging
Windows boots and creates an ntbtlog.txt file that records all drivers installed during startup.

3) Enable low resolution video mode
Windows boots using a video driver with low resolutions and refresh rates. This mode can be used to reset the display settings if you have set a resolution that your monitor does not support.

4) Enable Safe Mode
Windows starts with a minimal set of drivers and services.

5) Enable safe mode with loading network drivers
Windows boots in safe mode with the loading of network drivers and services necessary to access the Internet.

6) Enable safe mode with command line support
Windows starts in safe mode with a command prompt window instead of the normal Windows interface.

7) Disable mandatory driver signature verification
Allows installation of drivers containing incorrect signatures.

8) Disable early launch of anti-malware protection
Disable early launch of the anti-malware driver, which allows you to install drivers that may contain malware.

9) Disable automatic restart after failure
Windows will not automatically restart in the event of a fatal Windows error.

I advise you to choose the fifth item.

Ready. Windows started up in safe mode and we can go online to look for solutions to the problem or just like that.

Reboot Windows to start normally.

Method 2 - Windows 8 Safe Mode using msconfig.

Press the key combination Win + R to run the utility.

Now write msconfig and press OK or Enter.

The system configuration opens. Go to the download tab.

Now we put a tick on safe mode.

Click OK.

System Setup. You may need to restart your computer for the changes to take effect. Save all open files and close all programs.

Now we reboot. Done, now the system will always boot in safe mode.

To boot in normal mode, you need to re-enter the system configuration.

I'll show you how to enter it in another way. We move the cursor to the lower right or upper right part, then lower it (if you moved the cursor to the upper part) or raise it (if you moved the cursor to the lower part) and select search.

You can launch the System Configuration utility using the built-in search taskbar. Just enter your request and click on the very top row in the search results. In the window that appears, go to the "Download" tab and check the "Minimum" item. Confirm your choice by clicking on the "OK" button. You will see a dialog box asking if you want to restart your computer right now. After your consent, the operating room Windows system 10 will boot into Safe Mode.

Method 2. Command line

Experienced users should remember that you can boot the system in safe mode by holding down the F8 key when starting the computer. However, in Windows 10, this feature was disabled to speed up system startup. To fix this "improvement", you only need to enter one command at the command line.

Click right click mouse on "Start" on the taskbar and select "Command line (administrator)" from the menu that appears.
Enter the following command in a Command Prompt window: bcdedit / set (default) bootmenupolicy legacy
Press Enter. Close the terminal window and restart your computer. Now, when you press the F8 key during system startup, the boot method selection dialog should appear again.

If in the future you want to return everything as it was, then this can be done using the following command:

Bcdedit / set (default) bootmenupolicy standard

Method 3. Special boot options

This method does not require any tricks from you and seems to be on the surface. However, how many can boast that in the wilds Windows settings 10 discovered this useful feature on their own? So I decided to include this loading method in the article too.

So, open the "Start" menu, click on the "Settings" link, and then proceed to the address: "Update and Security" → "Recovery" → "Special boot options". Click on the "Restart Now" button. This will take you to the Select Action screen. It offers three options, of which we are interested in the "Diagnostics" item.

On the next screen, click the "Advanced Options" button, and then "Boot Options". At the end of this long path, we are waiting for the desired option called "Enable Safe Mode". By the way, this journey can be significantly shortened by simply holding down the Shift key while clicking the Shut Down command in the Start menu.

Categories

Popular