Make nat open mode. Strict NAT type prevents your Switch from connecting? What is NAT in XBOX

Question: I get an error that says my NAT type is "strict". What does this mean and how can I change the NAT type?

Error: NAT Type "Strict"

Answer: NAT stands for Network Address Translation, that is, "transformation network addresses". It is the mechanism by which your router or internet gateway converts your computer's private IP address and port to a public IP address and port. The NAT type tells you what method your device uses to perform this translation and how it filters incoming packets.

Basically, the NAT type determines how easy it is for the game to connect to other players over the Internet.

There are three types of NAT

OPEN: you can connect to devices with any type of NAT.
MODERATE: You can connect to devices with "open" and "moderate" NAT type.
STRICT: you can only connect to devices with "open" NAT type.

If your NAT type is "strict", you will not be able to connect directly to the vast majority of players. This will cause problems: high signal latency ("lag"), smaller gaming sessions, longer latency, more frequent disconnects. In case of connection conflicts, the game may kick the player with the "strongest" NAT type.

How do I change the NAT type?

Some routers have a special "game mode". Typically, if you enable this mode, a softer NAT type is established. To find out if your router supports this feature, read the user manual or search the Internet.

If your NAT type is "strict", it can block ports used by the game, or convert a private port to a non-deterministic public port when sending packets to other players in the session. Other players will not be able to determine which port to connect to. To fix this problem, use uPnP or set up port forwarding on your router. Most routers support port forwarding to some extent. If you set the correct settings, the router will redirect incoming packets from specific ports to the specified device within your network. You may also need a static IP address to use this feature (this does not mean a static address assigned by your ISP, but simply the private static address of a computer on your internal network). For instructions on port forwarding for your router model, see http://portforward.com. And http://portforward.com/networking/staticip.htm explains how to assign a static IP address to your computer. GTA Online uses UDP port 6672 to exchange data packets. Once your computer is assigned a static IP address, set up UDP port 6672 forwarding to that address.

Changing the NAT type on the example of the "ZTE" router

Additional ports for forwarding in GTA Online:

TCP-ports: 80, 443
UDP-port: 6672, 61455, 61456, 61457 and 61458

What else can you do to improve the quality of your connection?

Make sure your router has newest version software(it is very important).
Unplug the router for 10 minutes, then plug it back on. Some older models of routers begin to perform worse over time, and, as with computers, a reboot is required to restore functionality.
Disable firewall and other network traffic filtering applications, or open the above ports.
Enable or disable uPnP on your router.
Connect your computer directly to your modem using an Ethernet cable (i.e. not over Wi-Fi).
If the router is connected to a network gateway (a device that combines a modem and a router), both devices can use NAT. To fix this problem, put the gateway in "bridge mode" - in this case, NAT will only use the router. To find out how to put the gateway in "bridge mode" (or get PPPoE data if you are using an ADSL modem), read the user manual or contact your ISP's technical support. You can read more about double use of NAT here: http://portforward.com/help/doublerouterportforwarding.htm.
If you are using an ADSL modem, check if the NAT type is improved by establishing a PPPoE connection through a computer. The corresponding instructions should be outlined in the user manual (or you can contact the technical support of your provider).

And other online games. In some cases, you can independently change the Internet settings and select an open NAT type. Symptoms of strict NAT are empty sessions in the game and frequent departures from the server.

Strict NAT in the game

Bug fixes GTA Online using " strict»Type NAT(Nat) led by Rockstar Games.

Question: I get an error that says my NAT type is "strict". What does this mean and how can I change the NAT type?

Answer: NAT stands for Network Address Translation. It is the mechanism by which your router or internet gateway converts your computer's private IP address and port to a public IP address and port. The NAT type tells you what method your device uses to perform this translation and how it filters incoming packets.

Basically, the NAT type determines how easy it is for the game to connect to other players over the Internet.

By the way, do you already have GTA 5? If not, you can play GTA Online right now for free with all the add-ons from Rockstar Games.

There are three types of NAT:

OPEN: you can connect to devices with any type of NAT.
MODERATE: You can connect to devices with "open" and "moderate" NAT type.
STRICT: you can only connect to devices with "open" NAT type.

How do I change the NAT type?

If your NAT type is "strict", it can block ports used by the game, or convert a private port to a non-deterministic public port when sending packets to other players in the session. Other players will not be able to determine which port to connect to. To fix this problem, use uPnP or set up port forwarding on your router. Most routers support port forwarding to some extent. If you set the correct settings, the router will redirect incoming packets from specific ports to the specified device within your network. You may also need a static IP address to use this feature (this does not mean a static address assigned by your ISP, but simply the private static address of a computer on your internal network). For port forwarding instructions for your router model, visit portforward.com. And http://portforward.com/networking/staticip.htm explains how to assign a static IP address to your computer. GTA Online uses UDP port 6672 to exchange data packets. Once your computer is assigned a static IP address, set up UDP port 6672 forwarding to that address.

Additional ports for forwarding in GTA Online:

TCP ports: 80, 443
UDP ports: 6672, 61455, 61456, 61457 and 61458

What else can you do to improve connection quality:

Make sure your router has the latest software version (this is very important).
Unplug the router for 10 minutes, then plug it back on. Some older models of routers begin to perform worse over time, and, as with computers, a reboot is required to restore functionality.
Disable firewall and other network traffic filtering applications, or open the above ports.
Enable or disable uPnP on your router.
Connect your computer directly to your modem using an Ethernet cable (i.e. not over Wi-Fi).
If the router is connected to a network gateway (a device that combines a modem and a router), both devices can use NAT. To fix this problem, put the gateway in "bridge mode" - in this case, NAT will only use the router. To find out how to put the gateway in "bridge mode" (or get PPPoE data if you are using an ADSL modem), read the user manual or contact your ISP's technical support. You can read more about double use of NAT here: http://portforward.com/help/doublerouterportforwarding.htm.
If you are using an ADSL modem, check if the NAT type is improved by establishing a PPPoE connection through a computer. The corresponding instructions should be outlined in the user manual (or you can contact the technical support of your provider).

Summer is coming, and you have never bought for GTA Online yet? Check out our digital store for special offers from Rockstar Games.
Share the material on social networks: Selection: * the site wishes you a good day! *

Buy GTA 5 for PC, PS, Xbox

By purchasing GTA 5 you can play GTA Online and download add-ons for free. The arena battle is already in the game.

Payment cards Shark for GTA Online

Red dead redemption 2

Release date for Red Dead Redemption 2 on PS4 and Xbox One: October 26, 2018. PC version of RDR 2 will not be released this year. Rockstar Games will continue to develop GTA V and release updates for GTA Online.

FRAGE:

Mein Spiel zeigt mir an, mein NAT sei Strict oder Moderate. Wie bekomme ich Open NAT?

ANTWORT:

Ein Strict oder Moderate NAT kann dazu führen, dass Sie nicht alle Features Ihres Online-Mehrspieler-Spiels genießen können.

NAT steht für Network Address Translation (Netzwerkadressübersetzung). Grob gesagt ist es eine Methode, den Verkehr aus dem Internet (zum Beispiel einer Webseite, einem Spielserver oder einem P2P-Netzwerk) zum richtigen Gerät (zum Beispiel Computer, Konsole, Tablet) ihn Ihrem lokalen Netzwerk. Weiterzuleitule Diese Methode zieht sowohl das Gerät als auch den Ursprung des Verkehrs in der "Unterhaltung" in Betracht und das kann dazu führen, dass Sie für manche Dienste oder Spiele Open NAT haben und Strict NAT für andere.

Die Hardware, die in einem Netzwerk für NAT verantwortlich ist, ist der Router. Ihr Anfangspunkt beim NAT-Troubleshooting sollte daher Ihr Router und seine Konfiguration sein, auch wenn andere Faktoren Ihr NAT negativ beeinflussen können.

Das kann gut oder schlecht sein:

Einige Router sind leichter zu konfigurieren als andere
- Wenn Sie eine gemeinschaftliche Internetverbindung benutzen (zum Beispiel in einem Wohnheim, einer Militärbasis, einem Krankenhaus) haben Sie vielleicht keinen Zugang zu Ihrem Router
- Manche Internetanbieter bieten Ihnen einen Router für zuhause an, aber organisieren das Netzwerk so, dass Sie hinter einem weiteren Router sitzen, zu dem Sie keinen Zugang haben. (Ihr Router ist so nicht direkt mit dem Internet verbunden, sondern mit einem zweiten "lokalen" Netzwerk. Dieses Szenario nennt man.)

Nun zum Troubleshooting!

Wir haben Troubleshooting-FAQs für Verbindungsprobleme für die meisten Ubisoft-Spiele zusammengestellt. Um diese zu finden, klicken Sie auf die Suchleiste oberhalb von diesem FAQ, wählen Sie Ihr Spiel und Ihre Plattform und geben Sie ein Verbindungsschwierigkeiten... Die Suche zeigt Ihnen das passende Verbindungs-FAQ für Ihr Spiel an, mit dem Sie NAT-Schwierigkeiten sowie andere Verbindungsprobleme beheben können.

Many players who bought medieval action For Honor, faced such a problem as strict NAT, which does not allow them to participate in online battles with other players. The fact is that it blocks ports, which is why users simply cannot connect to the server. In this guide, we'll show you how to get rid of Strict NAT in For Honor.

NAT variations and antivirus (firewall) updates

First of all, we note that there are several types of NAT, namely:

Strict - you can play with him only with those users who have an open NAT.
Moderate - you can easily play with it with players who have open NAT however, with gamers using strict, problems may arise.
Open - any multiplayer mode will run without any problems.

So, if your system has strict NAT, then it is worth starting to solve this problem by downloading latest versions your antivirus or firewall, probably installed on your PC.

To identify and update such security programs as Avast, Kaspersky, ESET NOD32 and so on, you should contact their creators, that is, look at the official sites or view the corresponding options in the programs themselves.

Have you updated the above programs, but the problem persists? In this case, you should try to adjust this software in such a way as to open access to the desired game. This can be done using the list of exclusions (this section is called differently by different programs). When adding a toy as an exception, do not forget about Uplay, because it is through it that this action is launched.

How to forward network ports

Unable to shut down the firewall? Then you should try a method like forwarding network ports to the IP address of your console to maximize your existing connections.

TCP: 80, 443
UDP: 3658, 3074

TCP: 13000, 13005, 13200

The instructions for adjusting ports may vary considerably depending on the software you are using. They can be found on the manufacturers' Internet resources. Useful Tips often hosted on free web portals such as Port Forward (not affiliated with Ubisoft).

Ports blocked by ISP

Oftentimes, the restrictions are due to the policies of your internet provider. If you are unable to resolve your For Honor multiplayer connection issue, we advise you to contact your ISP to see if they are blocking any network ports.

If they were still blocked, then you should consult with the specialists of the Internet provider to find out from them how you can get around this limitation.

Background processes

Problems with strict NAT and inability to connect to network mode may appear due to programs running in the background. For this reason, we advise you to be sure to close all programs before launching games released by Ubisoft. For this, see the following instructions:

Open "Start" and activate "search for files and programs.
Then we delete all the letters in the creeping line and enter MSCONFIG there. Press Enter and thus open the OS configuration menu.
We examine the list of startup programs (not the startup section) and select the "Selective startup" option.
Next, remove the flag from the "Load startup items" menu.
At the end, click on the "Apply" button and reboot the system.

How can I disable startup items using MSCONFIG? It's very simple - check the box next to "Normal startup".

HOSTS files

The HOST file is a small text file that is one of the Windows particles. It can be used to route traffic or block web portals. However, in some cases, it leads to blocking access to games.

All of this information should have helped you sort out strict NAT in the Ubisoft game. If you could not cope with this problem, then we advise you to write to the support service, describing in detail the essence of the issue.

You may need to assign a permanent, static IP address on the PlayStation 4 in order to establish a NAT Type 2 connection. Setting a permanent IP address ensures that your console will always have the same internal IP, even after you reboot the console. Some routers provide the ability to manually assign an IP address, so first you need to check if this option is possible in your router. If not, then you can configure the static IP through the PS4 console menu.

This guide is divided into two parts. Read everything from start to finish.

How to manually configure a static IP address on a PlayStation 4 via a router

Find a way in your router to manual setting IP addresses. Not all routers support this feature. The setup process will differ depending on the router model you are using. If your modem allows you to manually configure the IP address, then simply assign a permanent IP to the PlayStation 4. In this case, you will not have to make any changes to the settings of the console itself. The router will independently assign an internal IP for the PS4, the functions of which are identical to the static one.

In case your router does not support manual IP settings, you will have to do the settings through the PS4 console. To do this, follow the instructions below:

You can try to permanently bind your PS4 to the IP address you are currently using. To find this IP, turn on your PS4 and do the following:

Write down this IP and MAC address of the PS4 on a piece of paper. In addition, you will need to remember the IP address of your router, which is specified as the Default Gateway. How to do this is described in the next paragraph of our guide.

Go to the settings of the router through the computer (this is done through the browser, by entering the IP of the router, for example, 192.168.1.1. Or 192.168.1.0. / 192.168.0.1). You will need to permanently assign the PS4 the IP address you wrote down earlier in the first step.

Below is a screenshot with an example of a modem that allows you to manually assign an IP.

This router from Asus has lines for entering the IP address, after which the MAC address is selected from the drop-down menu. Use the address numbers that you wrote down in the first step of this guide. In our example, after recording the numbers, you must click the "Add" button.

Some routers cannot assign IP addresses that are in the router's DHCP range (an address range that is automatically assigned by the router various devices on your network). If this is your case, then you will need to select an IP address outside the DHCP range of the router. How to do this, see points 2-4 in the next section of this manual (“ How to set up staticIP-address inPS4 »).

Once you've linked your PS4 to a specific IP address, test your console connection to ensure it's working properly. To test the connection, do the following:

In case of successful completion of the connection test, you will see the inscription “Internet Connection Successful”.

UDP: 3478-3479

More detailed information how to do it, there is

After you've assigned a permanent IP address for your PS4 and redirected ports on your router, check your Internet connection. How to do this, see paragraph 3 of this manual.

Congratulations, your connection should be set to NAT Type 2.

If you were unable to establish a NAT Type 2 connection, check if you did everything right. Re-review the information you entered in the IP and MAC address line.

If you still have difficulty configuring a NAT Type 2 connection, check if the connection is established correctly. You may have more than one router in local network... To determine the number of routers on the network, you can use free program Router Detector. It is very important that there was only one modem in the network, otherwise it is quite difficult to set up a network without unnecessary headaches.

How to set up a static IP address on PS4

If you have a router that cannot manually assign internal IP addresses, follow these steps to set up a permanent IP on your PS4:

Find out what IP address, subnet mask, gateway and DNS the PS4 is currently using. To do this, follow the instructions below:

Make a note of the IP address, subnet mask, gateway, primary DNS and secondary DNS. You will need to enter all these numbers into the console a little later.

Next, enter the router settings via your PC.

To enter the settings of the router, write its IP address in the browser line. You can find the IP in the list of addresses that you wrote down in step 1. The IP of the router is the address of the Default Gateway.

If you cannot figure out how to enter the modem settings, visit this page. Select your router model and read how to enter the settings.

You need to look through the settings to see the range of DHCP addresses that the modem uses to automatically assign IP devices on the network.

Below is a screenshot of how the line with this range should look like. Used the Linksys router menu. The DHCP range is circled in red.

You will need to select a number between 2 and 254, which is outside of the DHCP range, in order to assign an IP to your set-top box.

In the example above, the Linksys router uses the range 100 to 149 to assign IP addresses to devices on the internal network. In this case, you can select, for example, the number 31, then the full IP address for the PS4 will look like this: 192.168.0.31. Here are some more examples to help you understand better:

If DHCP range is 200-254, you can choose numbers from 2 to 50
If the router uses a range of 50-200 then 2 to 49

To check if the IP you have chosen can be used, do the following:

From the Start menu open Run
Enter the command "cmd" without quotes and press Enter
After that, a black window should appear.
Next, in the input line, enter: "Ping (space) IP". For example: Ping 192.168.1.54
Hit Enter.

If the IP address does not ping, that is, packets go to it, but there is no response, then such an IP suits you, it is free. If packets come with responses, this means that the IP is currently in use, so you need to choose another, free address. Below is an example of an IP address that is already in use.

Next, you need a PS4 to set the IP address you have chosen.

Now do the following:

If you have followed all the above steps exactly, then the static IP will be configured correctly. If you have any problems, check the correctness of the information entered, in particular, check the numbers that you entered in the line of the IP-address, gateway, DNS. To double-check this, open the PS4 main menu, select Settings => Network => View Network Status.

Opening ports or Port Forwarding on your router means redirecting all traffic to a specific internal IP address. To get a NAT Type 2 connection, you need to forward the following ports to the IP address of your PS4:

TCP: 80, 443, 1935, 3478-3480
UDP: 3478-3479

For more information on how to forward ports, there is

After you have assigned a static IP address for the PlayStation 4 and correctly forwarded the ports on your router, you can check your Internet connection. How to do this, read a little above.

Congratulations on your installation NAT connections Type 2! If you have any problems, first of all, we advise you to check the correctness of entering the numbers when specifying the gateway address, IP, DNS and subnet mask.

Found a typo? Select the text and press Ctrl + Enter

Categories

Popular