How to hang a router on the wall without drilling. How to Install a Router Correctly: Best Tips and Ideas. Signal amplification and serious installation errors
Where to hide the router without losing internet speed? Our tips will definitely help you find the best place for this device.
Looking for the best place for a router
- When setting up your router, make sure that there is enough free space for wires. It can be frustrating if you find the perfect spot for your router and then can't plug in a new cable.
- It is especially important to choose the right environment: the place of installation should be neither hot nor cold. You should also avoid places with high air humidity and dust, which can significantly shorten the life of the device. If you are unsure what conditions your router can withstand, take a look at the instruction manual.
- The router should be located closer to the center of the apartment. Try to locate the device close to existing cable networks to avoid additional costs for new cabling.
Hiding a router without signal loss
- If you want to hide it, it is important that it is in the middle of the area that you want to cover with the WLAN signal. Improper placement of the receiver may result in reduced speed wireless connection or even loss of signal.
- Do not place WLAN routers in close proximity to heaters, refrigerators, etc. household appliances as it may interfere with distribution.
- It is very important that you can easily get to the router. You will probably sometimes need to turn off, turn on, or just restart the device - and it is better to do this without global permutations.
- Here are some practical ideas on how to hide your router. The first and the simplest one is to mount it on a mount in an inconspicuous place on the wall. Similarly, it can be attached to back side writing desk. If you have a tiered ceiling with revision holes in your home, try hiding it there.
This article is not about connecting and configuring Wi-Fi router a, but about its correct location in an apartment, private house, or office. If you haven't bought a router yet, then read on and head to the store. After purchasing a router, you will need to install it in a certain place, connect and configure it. You can read about connection and configuration in the instructions that came with the kit, or in other articles on our website. Instructions for configuring some routers are collected on the page. And in this article, we will focus specifically on choosing a place to install the router. Where to install and where not.
The location of the router in the house first of all affects the coverage of the Wi-Fi network. It's clear. If you have a huge apartment, or a large house, then by installing a router at one end of the house, Wi-Fi is unlikely to catch in the back room. There are no secrets in choosing a location for installation. But adhering to some recommendations, there is a chance to do without buying a second router, or a repeater to amplify wireless network.
If at the time of purchasing the router the Internet is already connected to you, then it is most often installed where the Internet cable from the provider is laid. Because laying a new cable, lengthening it, or even shortening it is not an easy task. And I will say this: if, after setting up the router, the Wi-Fi network catches all over the house and everything works well, then you don't need to invent something. Install wherever you can. This is especially true for one-room or small two / three-room apartments. As well as small houses. Wherever you install the router, stable wifi signal will be in all rooms.
Guidelines for choosing a location for the router
As I wrote above, you can install the router in the place where you like, where the Internet is laid, or there is a place to install it (table, shelf, etc.). If there are no problems with the Wi-Fi network coverage, then you can not close this article and use the Internet.
If you have problems with coverage, then here are some tips for you:
- Do not install the router near other electrical appliances. Such as: radio telephones, microwave ovens, TVs, etc. Since the Wi-Fi network operates at 2.4 GHz, or 5 GHz. And the technique that I listed above can also use this frequency, then there will be strong interference. Because of this, the signal may drop, or there will be an unstable Wi-Fi operation networks.
- The Wi-Fi signal passes through obstacles and the signal strength drops. The biggest evil is metal barriers. Walls with metal elements inside (as a rule, these are load-bearing walls). Metal doors, etc. Also mirrors and glasses beat off the signal of the wireless network. Concrete and brick walls also reduce the range of the Wi-Fi network decently. The fewer walls and barriers, the better.
- Take a look at the plan of your house or apartment and see if it is possible to place the router closer to the center. This arrangement will provide more even coverage throughout your home. And it will not happen that your neighbor has a more stable signal on your network than yours. Or, install the router closer to the area where you will actively use the wireless network. For example, closer to the bedroom and kitchen. But further from the children's room. You should like this location if you are puzzled by the issue of harm from Wi-Fi network radiation.
- If possible, install the router as high as possible. It can be wall-mounted. Almost every router has wall mounting holes. And the antennas are folded.
And some more useful tips:
Where is the router installed in your house? How is the coverage of the Wi-Fi network? Share your tips in the comments, ask questions!
How to install a router in your apartment? - On the one hand, the question is simple, but it requires taking into account a lot of very important points.
Correct installation of a router in a one-story house
Indeed, with its simplicity, this is a responsible occupation, because the quality of the network around the house or apartment will depend on it.
Correct installation of the router in a 2-storey building
In order to achieve best quality network, it is necessary to place the router so that the coverage is optimal.
How the router works
Correct router installation
Before you start installing it, you need to decide whether you will use it exclusively for wireless connection, or a wire will be connected to it stationary computer... How many wires will be connected to it will depend on your decision.
WAN and LAN connection of the router In order to achieve the best coverage, the router should be installed as high as possible. This is due to the physics of radio wave propagation.
Correct Router Installation
The ideal place is the outer wall of the corridor, or a tall cabinet, which also stands in the corridor. Why a corridor? Firstly, it is through the front door that the Internet cable from your provider comes in. By installing the router near the front door, you will deprive yourself of the need to pull the cable throughout the apartment.
The correct installation option for an apartment
The second advantage of installing the router in this location is the best signal propagation. The fact is that the corridor is located almost in the middle of the living space, so it is from the corridor that the waves will optimally spread throughout the apartment. Thirdly, security.
Are Wi-Fi waves harmful?
Many scientists and doctors say that Wi-Fi waves are very harmful to human health. They can affect the functioning of the heart and nervous system. The most unfavorable place to install a router is a bedroom or a hall where we spend the greatest amount of free time. Trust it or not - it's up to each of us, but play it safe once again won't hurt.
Benefits of Mounting the Router at a Height
Why is it worth installing the router exactly at a height? Everything is simple here. It is from a height that the radio waves will spread evenly throughout the apartment. It is worth saying that it is quite difficult to correctly position the router, because the walls affect the quality of the network - the conductivity depends on what material they are made of.
Radio signal interference
Houseplants and even an aquarium can also serve as a barrier. Another mistake many people make is installing a router on system unit or table. Of course, this is not a ban, but the quality of the network may deteriorate significantly.
Working Frequencies
The frequency of the router also affects the quality of the network. As you know, there are now operating frequencies - 2.4 and 5 GHz. There is a huge difference between the two. Most data transmission standards operate at 2.4 GHz. Universal application of this standard makes the channel busy, so all kinds of interference can appear. This frequency is also characterized by the fact that its range is significantly lower than that of routers that operate at a frequency of 5 GHz.
A lower frequency can also be affected by the presence of radiotelephones and microwave equipment in the house or apartment. A certain conclusion can be drawn from this. If you need to cover a large area with a radio signal, then it is better to choose a router that operates at a frequency of 5 GHz. Due to the fact that at the moment there is not so much equipment that operates on this frequency, the air becomes less crowded, so that interference is practically excluded.
Also on the quality of the wireless network of this frequency range phones and other equipment cannot influence. A significant disadvantage of this technology is the high cost of equipment, so many people use Wi-Fi routers operating at a frequency of 2.4 GHz.
Signal amplification and serious installation errors
What if you need to cover a large area with a wireless network, and you do not intend to pay big money for equipment? There is an exit. Computer stores have special gadgets called repeaters.
Their peculiarity lies in the fact that there is no need to connect any wires to it. All you need to do is plug it into an electrical outlet where a wireless network is still available.
How the repeater works
The repeater will receive this signal and amplify it. It is thanks to this device you can provide wireless internet the back room of your house, or the adjacent territory.
Pets and heaters
If you have pets, then in this case you should be just as careful. It is better to install the router in a place where a cat, dog or parrot cannot reach. Here the point is as follows. As we all know, almost all animals love to play, while they bite whatever they catch in their teeth. Games like this can end up with your pet being able to:
- Gnaw through the power cord;
- Damage the incoming internet cable;
- Damage the router itself.
There is nothing to worry about, but this nuisance can cause you certain problems in the event that you urgently need access to the Internet. Parrots are also a common reason for the lack of the Internet, because they can also gnaw through one or another wire.
Another big mistake when installing a router is their location near heating appliances. It uses various parts that are soldered to the PCB. If overheated, these parts may fail. Another reason for overheating breakdown may be the desoldering of the radio component. If your device is under warranty, then if the workers service center determine that it has broken down for your reason, you will make repairs at your own expense.
Another nuance of choosing a router for home. You need to know what receiving frequency your laptop, smartphone or tablet is operating on. If their receiving frequency is 2.4 GHz, then purchasing a router operating at 5 GHz is a waste of money. In another case, it may be that the receiving equipment can operate at a frequency of 5 GHz, and the transmitting equipment - 2.4 GHz. V this case They are compatible, so you won't have the hassle of setting up your home wireless network.
Attention! Do not install the router near a radiotelephone or microwave oven, because the signal quality will be unstable and “dead zones” may appear in your apartment or house.
Hello to all homemade lovers!
Recently I decided to hang my modem on the wall, which was previously on my computer desk.
Due to the peculiarity of the modem's shape (narrow and elongated in height), it stood on the table rather unstable and could easily tip over from accidental grazing. At the same time, on the back of this modem, there are lugs made specifically for hanging on the wall.
So I decided to hang it on the wall higher, because it will be more convenient and safer, and for reliable wireless operation. Wi-Fi networks it will be better this way.
However, it turned out that when the modem is hanging on the wall, it is very inconvenient to turn it on and off, since the corresponding button is located at the bottom of the rear panel, and the gap between the wall and the rear panel is not very large. In addition, it turned out that in this position, the modem also heats up much more (apparently due to the proximity of the wall).
As a result, I decided to make a special canopy or holder that could be fixed on the wall, and then hang the modem on it.
For this I needed the following accessories:
Materials and fasteners:
A piece of board 2 cm thick, 12 cm wide, and about 20 cm long.
Two screws 3x15 mm.
Instruments:
Drawing and measuring tools (pencil, tape measure and square).
Jigsaw with a file for a figured cut.
Electric drill-screwdriver.
Drill bit for metal with a diameter of 2.5 mm.
Drill for metal with a diameter of 4 mm.
Perforated drill bit for wood with a diameter of 16 mm.
Spherical milling cutter for wood.
Semicircular chisel.
Bit screwdriver PZ2.
Sandpaper.
Manufacturing process
First, I marked the plank and especially the future cutout for back panel modem, which contains ports for connecting cables, as well as a power button.
In general, it should be noted that such a holder is best made of thick plywood, it will be much stronger and more reliable. But at that moment I did not find a piece of thick plywood and decided to make a holder from a piece of board.
After marking, I sawed out the workpiece with a jigsaw and carefully processed it with sandpaper.
Then I drilled two through holes with a diameter of 4 mm in the workpiece, for screws, for attaching the holder to the wall.
These holes were countersunk with a spherical cutter on wood to sink the screw heads.
After that, I drilled two more blind holes with a diameter of 2.5 mm, for the subsequent screwing of small screws into them, on which the modem will actually be hung.
Then, I drilled three more 16mm holes for better ventilation and heat dissipation.
And between these holes and the end sides of the holder, I cut the channels for air circulation with a chisel.
For this, I also used a wide chisel with a straight blade.
After that, I screwed in the screws for hanging the modem with a screwdriver.
And I slightly treated the holder with a protective coating, although there was no particular need for this.
And this is how I got a ready-made holder for a modem!
And here is his rear view.
And this is how the modem is hung on it.
Well, after that, I just had to screw the holder to the wall with two screws.
And hang up a modem on it.
As a result, using the modem on such a holder has become much more convenient. Now you can easily reach the power button with your finger.
In addition, in this position, you can even connect and disconnect cables to the ports located on the back of the modem, without even removing the modem from the wall.
Naturally, the ventilation of the modem has also improved, so it doesn't heat up so much.
Well, that's all for me! So far, everyone will have more necessary and useful homemade products!
When performing work in small offices, you often face the need anchor abandoned equipment on the floor, often lying underfoot, somehow tucked in by folk craftsmen in the most bizarre places. For example, you can find this (see photo), a familiar picture? :)
We put things in order.
We mount the router to the wall in a few minutes.
We need quite a bit - a sheet of paper, a pencil, a couple of screws and a screwdriver for them. If the wall is made of plasterboard, and now such walls prevail in offices, then nothing else is needed.
Place the device with the back facing you, put a sheet of paper on it, take a pencil and go over the sheet of paper with a pencil over the holes in the plastic for the screws.
So you can easily get points for fixing the device on the wall without a ruler, in fact - the simplest template. Pierce the paper in the necessary places, position the sheet on the wall and through the holes leave marks with a pencil on the wall in the places where you will need to screw in the screws. Install suitable screws and fix the device to the wall.
It takes very little time. The number of failures in small networks is reduced by an order of magnitude. Cable removed from the floor does not interfere with the cleaning lady to clean the office, and the staff very rarely touches him with their feet, respectively, the connectors, plugs, sockets remain intact.
Drilling the wall to mount the router, switch.
Sometimes drilling is indispensable, and there may not be a vacuum cleaner in the office. There is no need to leave behind a “gift” for the cleaning lady.