Turn on the computer according to the windows 10 schedule. Computer shutdown timer. The laptop does not turn on, even after installing Auto Power-on & Shut-down, what to do
To reduce the power consumption of a computer, you just need to put it into sleep mode, the same method increases the speed of loading the operating system due to the lack of turning on and restarting.
Another undeniable advantage of this method is the ability to set the time to wake up from sleep mode to start the necessary tasks.
Instructions
1. Click the "Start" menu button in the lower left corner of the monitor. We select "All programs", then "Accessories" - "Service". Press the button "Task Scheduler" to open this program.
2. Click "Create a task" in the "Actions" column on the right (not "Create a simple task"). We assign a name for the task. You can also write a description of the task. No other settings need to be changed.
3. Click on the "Triggers" tab, then "Create". In the menu that appears, select the "On schedule" option. We mark the required frequency of the task with a checkbox, for example, daily, weekly, monthly. We set the desired date and time when your Personal Computer will come out of the sleep state. We set the necessary settings for each option (daily, weekly, etc.). Click "Ok".
4. Click on the "Actions" tab, then "Create". Click in the menu that appears next to "Action" and select the action after the PC wakes up from sleep mode. Usually this is the launch of some program or sending Email... If you just need to wake up the personal computer from sleep mode, select the lowest option - "Display message", and then set some information to display after waking up from sleep mode. If you select "Run Program", then mark the program to run after the personal computer wakes up from sleep mode. If you checked "Send e-mail", then fill in the required lines. After all these operations, click "Ok".
5. Click on the "Conditions" tab. We tick the line "Wake up the computer to complete the task." It is this option that will wake up your beloved computer on which there is Windows Vista strictly at the time you specified. You don't have to change anything in the "Parameters" tab. Click "Ok". Now your personal computer will "wake up" at the time you specified and, if necessary, perform the required task.
Notes (edit)
If your beloved computer is left unattended, it is still better to check the power settings to make sure that the computer goes to sleep after a certain time.
If your personal computer is configured so that a login screen appears after waking up from sleep mode, then this will not interfere with sending e-mail or launching a program. However, if you want to see the text, you will first have to log in.
Today there is a sufficient amount of software with which we can control the automatic switching on of the computer on a schedule. But I want to note that the automatic turning on of the PC with the help of programs is possible only when it is in "sleep" mode.
That is, a computer that is in "sleep mode", as it would be easier to say, is already turned on. It just “wakes up” and does not turn on.
It turns out (I was ashamed not to know this :)), you can set up the computer to turn on automatically according to a schedule and even when it is COMPLETELY OFF! Modern BIOSes that come with PC motherboards have settings for automatically turning on the off computer on schedule.
At the dawn of my acquaintance with computers (since 1995), such a setting in the BIOS could only be dreamed of. For what purposes you can use turning on the computer on the machine, it's up to you.
For example, from the most commonplace - using a PC as an alarm clock, turning on for distributing or downloading torrents while you are away, servicing your computer, or even when you are at work or on a business trip, etc.
Note that the fourth computer I tested, bought 6 years ago, did not yet have this opportunity. Let's now go directly to the BIOS settings.
How to enter BIOS depends on your configuration motherboard, mainly by pressing the Delete or F2 key on the keyboard at the initial stage of the computer boot. You can see the hint on the necessary keys immediately when you turn on the PC.
AUTOMATIC POWER ON OF THE COMPUTER
BIOS American Megatrends Inc. P1.80, 05/20/2011... Go to the “Advanced” section and select “ACPI Configuration”.
Turn on the “Restore on AC / Power Loss” setting in the “Power On” position.
We activate (“Enabled”) the setting of auto-enable “RTC Alarm Power On”.
We choose to turn on the computer every day (“Every Day”) or on a certain date within the current month in the “RTC Alarm Date Every Day” settings. We configure the time to turn on the PC: “hour / minute / second” in “RTC Alarm Time”.
After completing the settings, press the F10 key or “Save Changes and Exit” and “OK” to save the settings and restart the PC.
BIOS American Megatrends Inc. V4.3, 21.10.2009... We need the “Power Management Setup” section, go to it.
Turn the “Restore On AC Power Loss” setting to the “On” position.
We activate “Resume By RTC Alarm”.
We set the switch on for every day or on a specific date of the month in the “Data” setting and hours / minutes / seconds in “HH: MM: SS”.
We save the settings and exit the BIOS using F10.
BIOS American Megatrends Inc. 0401, 05.05.2010... In the “Power” section, go to “ARM Configuration”.
Activate “Restore on AC Power Loss” to “Power On” position.
We activate “Power On By RTC Alarm”.
The settings for daily switching on at certain hours / minutes / seconds become available.
Or a specific date, hours / minutes / seconds.
If you no longer need to use scheduled automatic power on, simply disable (“Disabled”) the “Power On By RTC Alarm” setting.
Unfortunately, these are all options BIOS versions, on which I was able to test the function - automatically turn on the computer. If you have a different basic input / output system (BIOS), then you already know where to "dig". And finally, I suggest watching a short video
Devices that turn on or off the light at a preset time are called time relays. They are very convenient and allow not only to save energy, but also to bring comfort to many areas of human life. You can find such an electric or electromechanical timer in many hardware stores and departments. household appliances... Devices are different types that differ in price and function.
Main characteristics
Monoblocs, which are timers, are most often built into a portable outlet, sometimes into an extension cord or adapter. This device controls the relay that connects the input and output contacts. It opens and closes them, thus stopping and restarting the supply of electricity to the connected device. The process is monitored and parameters are set through the control panel installed on the front of the monoblock.
Though different models timers have the same principle of operation, they are quite different from each other. Are as simple mechanical devices, and electric with complex settings and many additional functions... They are designed to be used in different environments and for different purposes. They differ in the following characteristics:
Almost all devices of this type are equipped with a built-in battery, rechargeable from the mains, and can operate even if there is no power for 100 hours or more. A full charge of such a battery takes 12-14 hours. In addition to switching the relay in automatic mode, most models can also be simply turned on or off manually.
Device types
Different types of timers and time relays differ in their principle of operation, switching period, installation method and conditions necessary for their normal operation. All of them have their own advantages, disadvantages and features of work, which make each type of device suitable for its types of tasks.
Mechanical and electrical
Control over the mechanical timer is carried out through a wheel divided into sections, showing time intervals, and buttons or levers located on the front panel. Although a mechanical clock is built into it, which determines the time, the device's motor still requires power from the mains, therefore it would be more correct to call it electromechanical.
The smallest switching range on the device is 15 minutes. Such a timer is most often used to turn on and off the light with an interval of a day or a week, when the second-by-second precision and timing are not important. Its advantages include ease of setup and operation, as well as a low price in comparison with electric models, to the disadvantages - the impossibility of adjusting the parameters to specific needs and the absence of a backup power source. This model is well suited for simple tasks.
Among the most common breakdowns in electromechanical timers, wear of teeth and gears can be distinguished, due to which the adjusting wheel stops working. In order to cope with this, you will have to call a wizard, but the likelihood of such a malfunction is much less than a variety of damage to parts and wires of electrical devices.
The electronic timer for turning on and off the light is controlled by a microprocessor. It is configured by a person using the panel located on the front of the device. The parameters are displayed on a small LCD display and are saved in the device's memory when turned off. Such a timer works from a built-in battery or batteries that are charged from the mains through an outlet.
The advantages of an electric timer in comparison with a mechanical one include a large selection of settings, the ability to set exact trigger parameters and visually see them on the display, minimal errors in time calculation and the ability to create small, up to a minute, switching ranges.
Among the disadvantages, it is worth noting the higher price, as well as the fragility of such devices - sometimes their battery, parts and software... In addition, they are more susceptible to negative influences. the environment and require additional protection From him.
By time of switching on and off
In addition to the principle of operation, timers differ in operating periods and response ranges. On this basis, they can be divided into the following groups:
There are also universal multifunctional devices with the ability to set parameters for any of these operating modes and combine them. But they are more difficult to operate and set up, so you shouldn't buy them unnecessarily.
Socket and stationary
By the type of installation, light timers are divided into socket and stationary. The first of them are connected to the electrical network through a socket using a standard plug, the second are placed in a specially installed box or rail of the separator board.
The socket relay is convenient when you need to control the operation of a separate electrical appliance or lighting in the same room. They are easy to install and use and have small size, do not require auxiliary wiring for installation in the power grid and can be moved from place to place as needed. A stationary relay does not share these advantages, but compensates for them with the ability to control the operation of electrical equipment in the entire residential building or work building at once. If this is exactly what is needed, then its installation will be much more convenient and profitable than using many mobile devices, even with all the disadvantages of this type of device.
By working conditions
When choosing a timer, there are sometimes important conditions under which they can work normally. For example, a device installed to adjust an automatic watering system for plants should continue to function when splashed with moisture, but a timer installed in a workshop will need dust protection.
The protection class of time relays, like other electrical appliances, is determined by the IP system. In total, there are 7 levels of protection against dust and 10 - against water, as well as additional designations of the device's resistance to weather, high voltage and other factors. They are listed in technical characteristics device. The timer should be selected in accordance with the conditions of the room in which it will then be installed.
In addition to protecting against harmful influences, it is necessary to take into account the maximum power of the devices that can be connected to the timer. In total, it should not exceed this indicator for the device itself. You can find it out in the instructions or on the information plate on the time relay case.
Timer functions
Electric and electromechanical timers are used to automatically control not only lighting, but also other electrical appliances: heaters (including underfloor heating systems), air conditioners, hoods, and more. Compared to permanent manual switching of devices, the use of a time relay has the following advantages:
Thus, time relays are quite common and are found everywhere in Everyday life person. They are inexpensive, but they significantly increase comfort and save time and effort, which has brought them popularity.
Criterias of choice
There is nothing complicated or unusual in choosing and buying a time relay. First you need to determine why such a device will be needed, what it will be used for and in what conditions it will work. Then you need to look at the following characteristics:
- discreteness of setting the switching time;
- instrument accuracy;
- the number of different set programs;
- the degree of protection from the effects of the external environment;
- maximum power of connected devices;
- convenience, clarity and accuracy of settings;
- the ability to connect several plugs to the relay at the same time;
- affordability of the price.
Comparing these characteristics with the purpose for which the time relay is purchased, it will not be difficult to choose the right model. In this process, you should not chase the most expensive and sophisticated devices - if, for example, you just need to turn on and off the light all the time at the same time, then a simple and cheap electromechanical timer with a clock will be enough. You can buy a timer in any electronics department or a specialized online store.
A very simple program TimePC to shutdown the computer on schedule. And it will also turn it on according to a schedule that you configure yourself.
There are situations when the computer performs some task, and you urgently need to run somewhere. Well, you just can't be late. Aborting the process is not good, not being in time is also bad.
And many do not like to fall asleep in complete silence and for this they turn on music or just some kind of movie. If only it was noisy. The person is resting, but the computer continues to work and overheat.
Well, to prevent this from happening, we will install special program – TimePC... With this program, you can tell the computer to turn off the command certain time.
Although there is something similar in the operating system (power setting), but standard function does not completely shut down the computer, but only puts the computer into sleep mode. Not bad, but still different compared to TimePC.
The program has additional useful functions... In addition to the fact that she can automatically turn off the computer at a user-specified time, she can turn it on. Even launch, at the request of the user, some program or several programs.
Let's see how simple it is. The program is displayed in three languages, but after installing it, the interface will be in Russian. You don't have to change anything.
In the settings, you can uncheck the box “ Close open programs at shutdown“
The fact is that when you turn off the computer with this program, we can choose one of two modes. The first is a normal shutdown, as we are all used to, the second is hibernation.
Hibernation(hibernation) from English translates as "hibernation" or simply "sleep" In this mode, the computer rests, but before shutting down, it remembers everything that was opened and started and saves it in the right place on a non-volatile storage device.
This is very convenient if you have not had time to finish working in some programs or open folders. When you turn on the computer, everything will remain in place.
The next item “ Check for updates“Here I also unchecked the box. Who knows, maybe programmers somewhere did not overlook something and the program will start not working correctly. Well, in the meantime, I am satisfied with this working version, I work with it, without updating.
Let's move on to the main thing. In the left column, select "Off / On PC"
On the right side of the program, check the box next to “ Turn off computer"We set the shutdown time, but we can not touch the date, it is already substituted for the date set on the computer. Unless you want to turn off your PC tomorrow or in a few days.
Now you need to select the shutdown mode. As I wrote above, there are two modes. Choose which one is more convenient for you. You can also schedule switching on after a certain time. Configured, click the "Apply" button and check if everything is correct. If you made a mistake in time or date, you can click the "Cancel" button and reconfigure everything.
WITH one-time setup we figured it out, now go to “” Everything is the same here. We set the shutdown time, and turn on the computer for a whole week. There is no sleep mode in the scheduler.
Configured, click the "Run" button and check if everything is correct.
By the way, before the computer turns off, the program will notify you about this in 30 seconds. If you are at this moment you are at the computer, you can turn it off by pressing the button labeled “STOP” Go to the item “ Launching programs "
Here we can specify the program that we want to run together with operating system... For example, a player with music. You will get such an unusual alarm clock. We can add a browser to the player so that we can check mail right away in the morning. TimePC allows you to run multiple programs at once.
We press the "Add" button. The explorer window will open. In the left column, select "Desktop" In most cases, when installing a program, it leaves its shortcut on the desktop. From the desktop, select the shortcut to the program that you need. Programs that come with windows need to be found on the C drive in the Program Files folder or C: \ Windows. Let's admit standard program Notepad which is located at C: \ Windows \ system32
To remove a program from auto-launch, you need to select it and click the "Remove" button
And that's all. Download the program and use it.
Download from Yandex disk
This is useful to know:
Modern technologies every day reach such a level of perfection that any workflow becomes automated. If you think about it, then soon a person will no longer need to get up every day, cook breakfast for himself, since smart machines will be able to make everything for him. Even take into account the film Surrogates, where all movements, trips to work, to clubs and other institutions, are carried out by robots, under the control of the mind of a person who is at home in a chair. Maybe this is a fictional story, and it will not be in the next couple of years, but the fact remains. And all this I lead to the fact that now you can turn on, turn off the PC and run programs automatically. Those. while you sleep, the PC or laptop can turn on by itself and perform the scheduled operations.
How to automatically turn on a laptop or PC
There can be many reasons for such an operation. Whatever it is, you are still here, and you want to know the solution to this problem. When it comes to a computer, then the task scheduler will come to your aid. I will not describe it here, since you can find many examples on the Internet, and there are no difficulties with it. As for the laptop, things are a little different here. Although I can't say for sure about all the models, since I tested only on my laptop, and I ran into such a problem. In general, here are three working examples to help you turn on your PC automatically:
- standard task scheduler (available in every Windows OS),
— Bios setup,
- additional software.
I omit the first two examples, since I have not tried them, but we will talk about the third below.
Auto Power-on & Shut-down
It is very easy to schedule the power-on of a laptop or PC using a handy program called Auto Power-on & Shut-down. With its help, you can easily choose the required start time for your stationary machine. Here is its approximate interface (it all depends on the version):
The figure shows the Russian-language version, which is very convenient for those who are very far from English. What else it attracts is the fact that you can record any actions that you see on the monitor. Those. you can even record actions such as: opening a browser, launching the desired pages (although this can be done using autoloading, but not always), programs, etc. This is how the creation of any new task looks like:
The laptop does not turn on even after installing Auto Power-on & Shut-down, what should I do?
It also happens, this is just the case that was written above, and which I encountered. I installed the program on my PC, scheduled it to turn on at 5 am, and everything is fine. The program worked, the computer started up. After a while I decided to install it on my laptop. I made the same settings and tested it in practice. However, the result was not positive, no inclusion occurs. The way out of this situation is not to turn off the laptop, but to hibernate. In this case, the program works with a bang. Well, then it all depends on your wishes. The program has a lot of settings and they are all available in the cracked version.
Here is such a simple and proven method that I use. If you have other options, don't worry, the main concern is what? That's right, working capacity, and everyone can have their own ways of achieving it.