Diameter designation in the Word. Sekh dating kirov. right numeric keypad

How to insert signs into Word text
diameter, stress, quotation marks or apostrophe ...

Word character table

Selecting a symbol from the table is a classic way of inserting symbolic characters into the text of the Word: set the cursor to the desired place in the text, open the tab-menu of the Word "Insert", click consecutively, as in the picture: "Symbols", "Symbol", "Other symbols". The "Symbol table" will appear, in which you need to click (click) on the required symbol and press the "Insert" button. The selected character will appear in the text Word document... To view the entire table Word characters- use the side slider.

Selecting and inserting symbols from a table is a simple but time consuming procedure. Text character table Word editor stuffed with all sorts of rubbish, in which it is simply unthinkable to quickly find the desired icon.

Mr. Unicode allows you to insert printable and non-printable characters and symbols from the keyboard. Unicode character codes (keyboard shortcuts) support almost all text editors, from notepad to Photoshop. In the table of Word symbols, the code of the selected symbol is displayed in a special window (6), see fig.

Apparently, from the words "a set of keys" - half of the inhabitants of the Internet falls into a trance. However, if a person is more than five years old, and he already knows letters and numbers, this is not difficult. Quite the opposite - there is a quiet buzz from the wild time saving. Codes of frequently used symbols can be written out on a piece of paper and stupidly trampled on "Klava", without going into the details of any menus.

To insert the required character or symbol - set the cursor to the desired place in the text, hold down (press, trample, do not release) the "Alt" key and, in the digital part of the "keyboard" - sequentially type the code of the character. Release the "Alt" key - the required character will immediately appear in the text.

Some popular symbols:

• "English double quotes": 0147 and 0148
• ‘English single quotes’: 0145 and 0146
  (right english single quote
  used in Ukrainian as an apostrophe:
  podvir'ya, suzir'ya, bur'yan)
• "Russian quotes (Christmas trees)": 0171 and 0187
• "Quotation marks": 0132 and 0147
• - simple dash: 0150
• - em dash: 0151

A broader picture of an example of using the keyboard when entering characters is given by the Word character table in Unicode:

An example of using a table:
alt + 1 = ☺; alt + 2 = ☻; alt + 3 =; alt + 4 = ♦; alt + 5 = ♣;
alt + 6 = ♠; alt + 7 =.; alt + 8 = ◘; alt + 9 = ○; alt + 10 = ◙; etc.

Tens are indicated on the left, and ones on the top. To insert a symbol - place the cursor in the text, hold down the "Alt" key and, without releasing it - the symbol code. Then - release the "Alt" key, and - the required icon will appear in the text line.

Attention! Enter the character code exclusively in the right numeric part of the keyboard. In this case, it must be turned on (activated)!

Find and enable (activate)

right numeric keypad

Right Numeric Keypad - Right numeric keypad on a regular computer keyboard... These keys are assigned functions that are not available on the upper numeric keypad, in particular - entering a numeric code. By default, the right numeric keypad is inactive. To activate the digital block, use the "Num Lock" key. Each repeated pressing of "Num Lock", alternately - activates / deactivates (turns on / off) the right number keys. In laptops (especially netbooks), the right number pad is often missing. The numeric keys, or combined with the main keyboard, or the function of entering numeric codes are carried by other keys on the main unit. Activating key "Num Lock", on laptops - also may not be.
However, the right numeric keypad cannot completely disappear with computer device... It is simply hidden and deactivated for the convenience of the user. The surest way to find out how to enable and activate the right number pad functions is to ask the manufacturer.

Otherwise, we call the "On-Screen Keyboard", which is always, everywhere and in everyone. The on-screen keyboard is located, something like this: Start Menu / (System Tools, Standard) / Accessibility / On-Screen Keyboard.

The on-screen keyboard usually displays the actual state of the real keyboard. On on-screen keyboard there may not be a right number pad and a "Num Lock" key. Not scary. Press the "Options" key on the on-screen keyboard (see the figure above). A dialog box will open where you need to check the box to enable the numeric keypad. We press "OK" - the digital block will appear on the screen. Press "Num Lock" - the keyboard is activated.

Insert stress into Word

An accent mark is inserted in a separate ass in the Word text:

• Place the cursor after the desired letter
• We type (print) the symbol code: 0300 or 0301 (tilt left / right).
  The numbers of the code will be displayed directly in the text.
  Do not touch, do not remove the cursor.
• Hold "Alt" and then - "X"
  (in the Russian layout - "H")
• An accent icon will appear above our letter.

On this moment, only Word supports the accent mark. In other text editors, you can insert an accent mark by copying it ready-made from Word text... In Notepad, the copied character, accents are not saved to the file ...
Use Notepad ++ ...

Diameter sign in Word

At the moment, Word does not support the diameter sign, as well as all other text editors. Instead of the classic diameter symbol (crossed out circle), it is generally suggested to use the good old crossed out zero: Ø Ø ... Visually, it is practically indistinguishable, and for programmers - one less headache. They (the programmers), and the crossed out zero, came up with something solely to distinguish the numbers 0 (zero) from the letter O... And then there is this awful diameter mark (crossed out circle), completely indistinguishable from the crossed out zero. For this, the sign of the diameter has sunk into oblivion. The only way to insert a real diameter symbol (crossed out circle) into Word text is to copy it from old documents, when this icon was supported by a text editor. Download: word.zip (downloads: 116) to copy the diameter sign. As for the strikethrough zero, it is entered with a set of keys, like: "Alt" + 0248 (lower case - ø ), "Alt" + 0216 (uppercase - Ø ). You need to type hot keys, certainly in the English keyboard layout. Otherwise there will be a letter NS !!!

When typing in MS Word, there is a need to insert special characters, such as: diameter icon, letter Alpha, copyright icon, etc. To insert them, there are special combinations and the usual insert, by means of the Word.

To go to the section of special characters in MS Word, go to the navigation menu - insert - Symbol - Other characters (to see the entire list of special characters).

Select any special character from the list and press insert. Also, in order not to constantly go into special characters, for each of them there is a keyboard shortcut that is visible when you select a character.

In order to use keyboard shortcuts, hold down Alt key and press the combination 0176 in turn and release Alt, the degree icon will appear in the document. The main condition for the numbers must be pressed on the small keyboard on the right, both on a laptop and on a stationary computer keyboard.

Let's take a closer look at keyboard shortcuts for the most popular special characters.

How to put an em dash in a Word?

The shortcut keys Alt + 0151 - Dash

How to put a degree icon in a Word?

Keyboard shortcut Alt + 0176 ° Degree sign

How to put a paragraph mark in a Word?

Keyboard shortcut Alt + 0167 § Paragraph

How to put stress in a Word?

The shortcut keys Alt + 769

How to put a plus minus sign in a Word?

Keyboard shortcut Alt + 0177 ± Plus / Minus

How to put a diameter icon in a Word?

Keyboard shortcut Alt + 0216 Ø Diameter

How to put a euro icon in a Word?

Keyboard shortcut Alt + 0136 € Euro

How to put a tm badge?

Keyboard shortcut Alt + 0153 ™ Trademark icon

How do I put a copyright badge?

Keyboard shortcut Alt + 0169 Copyright

For the rest of the Keyboard Shortcuts, look under your chosen symbol. All keyboard shortcuts are valid throughout the Internet and in any text line.

Not all symbols are located on the keyboard. The diameter icon is also missing on it. But this does not mean that it cannot be inserted into most modern applications. There is such an opportunity. Moreover, this operation can be done completely different ways... The most versatile of these is the use of ASCII codes. The second method is tied to the office suite of Microsoft and works only in it. The last method is related to. To implement it, you need the original diameter icon, which will then be copied and pasted into the new application. Each method will be discussed in detail within this article.

When does this need arise?

There are many cases in which it becomes necessary to insert the “Ø” sign in For example, it may be needed when drawing drawings, preparing price lists, creating advertising bouquets or explanatory notes for pipe products or valves. The list goes on and on, but it is clear that, although not so often, but
insert into electronic document the diameter icon is sometimes necessary.

Using codes

Most universal way based on the use of ASCII codes. It is implemented by the capabilities of the most operating system Windows, therefore, is not tied to any one, strictly defined application. First you need to remember special code- "0216", which corresponds to "Ø" in the ASCII code table. And the order of input in this case is as follows:

• Change the input language until “En” (“English”) appears. If this is not done, then instead of "Ø" will be entered "Ш".
• Next, turn on the numeric enhanced keyboard. Its activation is signaled by the "Num Lock" LED. If it is on, then nothing needs to be done.
• Then we go to the work area of ​​our application, if it is minimized. To do this, just click on it in the taskbar. Then we move the pointer of the manipulator over its working area and make one click with the left button. At the same time, the cursor blinks in it.
• At the next stage, hold down the "Alt" key (no matter from which side, you can either left or right). Then, without releasing it, sequentially on the right numeric keypad, type "0-2-1-6". We completely remove our hands from and after that the diameter icon should appear.

The main advantage of this method is its versatility. It works in most modern programs. There is no need to search for the original symbol. The disadvantage of such a solution is that you need to remember the code. If only one of this icon is required, then there is no problem. Worse if there are several of them. In this case, it is best to print out the most commonly used symbol code table on a sheet of paper and use it periodically.

Word and other office applications

The alternative way to enter "Ø" is tied to a specific group software products... it office suite Microsoft, which includes Word, Excel and other applications. Let's introduce the diameter icon in the "Word" as an example. In other cases, the input order is the same. In the process, go to the toolbar called "Insert". It is located at the top of the screen between the Home and Page Layout tabs. Move to this inscription and make a single left-click. Then on the right side of the screen we find the "Symbols" sub-panel. On it, select the item "Symbol" and in the list that opens, select "Other symbols". All these manipulations are performed right click mice.

An insert window will open. In it we find the "Ø" we need by scrolling through the symbols. This can be done using a special wheel or by repeatedly pressing the left button of the manipulator on the strip on the right. When we have found "Ø", select it by single pressing the left button of the manipulator and press the "Insert" button (located in the lower right part of the window). Then we close the window. After that, the diameter icon should appear in Word (in its work area). The downside to this method is that it only works in one group of applications. Therefore, it will not be possible to use it everywhere.

Clipboard

Another way of pasting "Ø" is based on using the clipboard and a combination of the "Copy" and "Paste" operations. First you need to find this symbol somewhere. For example, you can insert a diameter icon in the "Word" in accordance with the previously described technique. Then select it and copy it (you can use the keyboard shortcut "Ctrl" + "C"). Then go to another application and use the paste operation ("Ctrl" + "V"). The downside of this solution is that you need the original symbol. And he is not always available.

Finally

There is no diameter icon on the keyboard. But it can be entered without any problems in one of the three suggested ways. The simplest and most versatile of them is based on the use of so-called ASCII codes. It is not tied to a single application and works in almost all programs of the operating system.

chambbenna - 03/11/2019 at 07:38 AM - 5 comments

Natasha's gynecologist broke into a grin, and the nurse working with him immediately took out a map from Natasha's tree box. Irinka has long since regained her weight lost during her illness and regained her former complexion. Her peach cheeks exuded a warm glow, and her huge black eyes glittered unsafely. Especially when she cast her gaze on the doctor, amusingly caring for the lady invited to him. The surgeon was confused, looked at the young lady sitting next to him in bewilderment, but her brother rescued the situation. Already lying in bed, he and Vadim discussed how to name the upcoming baby. It was necessary to decide in advance, because in May Vadim was in Moscow. It will not, and it is possible that he will again be swimming, and the baby will need to be registered. Natasha was busy with dinner in the kitchen when a neighbor looked out of her own room. Natasha turned round in fright. What's happened. Really Polina Mikhailovna ... They cleverly peeled the potatoes and set them to cook, eh. We decided to have a cup of tea right there in the kitchen. Bella Lvovna expressively raised her eyes to the ceiling. Bella Lvovna got up heavily from the stool, removed the lid from the pan and poked the boiling potatoes with a fork.

Dementius - 03/11/2019 at 07:38 - 12 Comments

Next to the garage, Nastya saw another building, not so impressive and unlike a garage with windows. In a fairly spacious, light and extremely warm room, enclosures were located along the walls, in which cats and dogs of all imaginable stripes and breeds and of various ages lay, sat, wandered or played. So, either Vtorushin or Fedulov, Nastya thought about it. I wonder which of them turned out to be so kind-hearted. Nastya followed. Behind him, peering at the animals. Her attention was attracted by a large fluffy dog, offensively lying in the depths of the enclosure, burying its muzzle. In the paws. Nastya once again slowed down, this time near the enclosure, in which three spotted black-and-white kittens were busy. They returned to the door and were about to go outside, but Nastya stopped at one moment and turned to the enclosure with an old dog. From the menagerie, the path led to an alley starting from the park facade of the main house and stretching to the river itself. They walked slowly from the house towards the river, and the air became cooler and dampest with almost every step. Nastya looked at with enthusiasm. He was embarrassed and took away. They again found themselves in the alley and continued towards the river.

Elena - 11.03.2019 at 07:38 - 8 comments

Community. It means that it is definitely connected. It will be necessary to think about how to check this. Now it remains to clarify the question of his love relationship with Voronova. On Andrey's face. Konstantinovich did not flinch a single muscle. Either he himself is an actor to look for, then. I didn't feel the joke in the question, or there really is nothing to hide. They talked for another half hour, after which Ruslan began to say goodbye and finally played the last card in his sleeve. In the morning he received a call from the editorial office and asked to find an opportunity to take short interviews with some recognizable people about the fact that they are thinking about the agreement signed in Belovezhskaya Pushcha and about the possible development of events. Exactly. Irina mentioned this name when she listed all the living. The apartment. Curiously, for a long time she is going to keep Ruslan in the hallway. He had not read the book.

Inga - 11.03.2019 at 07:38 - 9 Comments

But Larissa hoped in vain. There was poison in the wine. Kneeling on a covered newspaper, Zubov twirled it in his hands. A small silver figurine. Nastya snatched the silver Cupid from Korotkov's hands and glared at the thin graceful letters. Mile from Volodya with love. Olshansky came up to them and held them out. A bunch of keys extracted from Larisa's purse. Having given the silver Cupid to the investigator, send Nastya and Yura Korotkov home to the Tomchaks. Larisa Mikhailovna, this is the mother of Gera Zolotovsky. He became restless again, I wanted to consult with you, maybe.

siborgprel - 03/11/2019 at 07:38 - 7 Comments

The door to the office of the scientific secretary did not open, and brave, lieutenant colonel. I did not leave it. Nastya, having hesitated slightly, took out her phone and dialed Bychkov's number. Nobody answered. Then she called Korotkov. Why aren't you going-. Yura attacked her straight away. She promised. Sorry, Yurochka, I’m wrapped up. Here you can spend half your life just waiting. I stand in the corridor for half a day, like a cattle at an exhibition. Everyone strolls past, but zero sense. You did what I asked. Well and.

epupgremeth1974 - 03/11/2019 at 07:38 AM - 10 Comments

Sorry. I heard it, said it politely. I said that you have extremely beautiful hair. Thank you, the woman answered coldly, again burying herself in the textbook. You are not even taken aback. Surely, for you it is often said. the starving man did not lag behind. Often, Lily lied, not looking up from the cynics. A. Have you ever been told that such beautiful girls should not only get an education, but also have fun, relax, enjoy life. And how do you feel about it. You agree with this statement. Lilya chewed another batch of soft, tasteless cabbage.

Naum - 03/11/2019 at 07:38 AM - 2 Comments

Like a measured night and darted into his own yard. There was a large dark bag on the bench next to Seryozha. If I had retained the ability to amuse myself this morning, I would certainly have burst out laughing, looking at Serezhino's elongated face. He, in my opinion, even lost the gift of speech for some time. V. Ochah the devils were dancing, and I realized that our skirmish had gone very far to become the property of the ears of Seryozha Lisitsyn and my daughter. Turning off the TV set, we came to the deplorable conclusion that we were going in the wrong direction. The cassette was on its own, and nothing to do with murders. She did not have 2 leading actresses. Leaving for the beach, we promised Irochka to return to dinner, so that later everyone would go to the hotel together to watch the meeting of the bright screen star Oleg Yushkevich. Tatiana walked with us to the embankment and went to Vernigora's neighbor. Rita arose.

Antip - 03/11/2019 at 07:38 - 0 Comments

And at the moment, an adult man, you send people behind the net, you dispose of destinies. Everything is as small, aunts Nastya and aunts Nastya. Why are you sticking to the guy, she stood up for Maxim. There is nowhere to put the energy. Better tell me what kind of corpse you have there. Student. One, Yura muttered darkly. Already the 3rd. Or maybe the 4th or the sixth, the jester will take them apart. That is.

Need to insert a diameter icon into your document? Not sure how to do this? You can learn this right now.

All the characters available for input on a PC simply cannot fit on one small keyboard. So, there is no diameter icon on it. However, this does not mean at all that this character cannot be entered into a text or other document on a computer. For example, you can easily insert a diameter sign in a Word.

When do you need to insert a diameter mark?

There can be many situations:

• To create technical diagrams, drawings. In them, the “Ø” sign is an integral element;
• The symbol can also come in handy when decorating advertising bouquets or price lists;
• When creating documents for pipe products, shut-off valves, where one simply cannot do without a diameter sign (it means important characteristic such products).

The listing can be continued almost endlessly. One thing is clear, the diameter icon is simply necessary, and the computer must be able to insert it.

Using codes

This is the most universal method which is based on ASCII codes. Its advantage is that it is implemented in Windows itself, and therefore it can be inserted into any application on a computer, including a Word.

The sequence of actions for inserting a diameter icon using a similar method:

• First, remember the code "0216". This value corresponds to the "Ø" character in the ASCII table;
• Set the input language to English (En), otherwise the letter "Ш" will be displayed instead of the required icon;
• Activate the numeric keypad by pressing the "Num Lock" key (this is not a keyboard under function F-buttons, and an additional one located on the right). Although if "Num Lock" is already on (LED is on), nothing needs to be done;
• Go to the application where you want to insert the symbol. Move the mouse pointer over the place where you plan to place the icon, click on this place once with the left mouse button;
• Hold down the "Alt" key (right or left - no difference);
• While holding it, enter the numbers "0-2-1-6";
• Press the "Alt" key back to its original position.

The “Ø” symbol will appear in the Word (or other application). This method is suitable for those who use this icon frequently. It is enough to memorize the ASCII code of the character once - and always enter it this way. The advantage of codes is that they can be used to enter many other characters that are not used so often.

If the diameter icon is needed from time to time, or if you need to remember many other codes besides it, then it is better to use another method.

Using the symbol table

In fact, this is the same table in Windows, from which characters are taken when entering ASCII codes. In order not to memorize each character, which is quite problematic, you can open the entire table at once. For this:

• Press the "Start" button at the bottom left of the desktop;
• Go to the section "All programs", then - in the menu "Standard";
• Select the "Service" item;
• Click on the "Symbol Table" label.

A window with icons will open. Another way to call the table:

• Press the key combination "win + r";
• Enter "charmap";
• Press Enter.

A table window will appear.

Then you need to select the required symbol from there. For this:

• Find the diameter icon (scroll the mouse wheel to search);
• Double click on it with the left mouse button;
• Click Copy.

Now the diameter icon can be inserted into the required application by the standard method or by the shortcut keys "Ctrl + V", "Ctrl + Insert". There are several spellings in the symbol table of this element, you can choose the most suitable one.

Using the resources of the Vord. Method 1

Any Microsoft office product (Word, Excel, etc.) already has this symbol in the database. You just need to find it, for this:

• Go to the toolbar on the "Insert" tab;
• Go to the "Symbols" submenu (it is located on the right, under the "Formula" label);
• Select "Other Symbols", a window will open;
• Find the symbol "Ø" (the list can be scrolled with the mouse wheel);
• Select the required character by clicking on it with the left mouse button;
• Click "Insert";
• Close the window.

In the appendix, you will see the “Ø” symbol. If you work with office Microsoft applications Is the most convenient method. In the described way, you can insert a symbol in both Word and Excel). If you are using another text editor or a spreadsheet, for example, you won't be able to insert the diameter sign in this way.

Using the resources of the Vord. Method 2

There is another method for inserting characters in the Word - using a hexadecimal code. So, codes 00D8 and 00F8 correspond to large and small diameter icons. After entering the code, press the key combination "Alt + X", "Ø" and "ø" will appear, respectively. Try it yourself. For this:

• Move the mouse pointer to the space immediately after the code (no space) and click there once with the left mouse button, so that the input pointer (vertical bar) appears;
• Then press the Alt + X keyboard shortcut (the keyboard layout is not important).

You can just highlight the hexadecimal code and then press the required keys. This method not very convenient, because you need to remember the meaning of the code. However, this method is also worth knowing about.

Using the clipboard

Everything is simple here, you need to find the required symbol somewhere, copy it and paste it into the application. The easiest way is to find the icon in the Word (if you have it installed). Insert it first into office application, then copy and place it in the desired location of the program you are using. For quick manipulations to activate the functions "Copy" and "Paste" it is easier to use not the right mouse button, but the combination of "hot" keys "Ctrl" + "C" and "Ctrl" + "V", respectively.

The disadvantage of this method is that you need to find the original sign of the diameter. If you do not have the Word installed (and this is implied if you needed to insert the diameter symbol in another application), you will need to find the element on the Internet.

Diameter icon on html page

The diameter symbol can also be inserted into the html code. There are mnemonic codes for this. Enter the symbolic primitive "∅" or "∅" in the document and the symbol "∅" will appear on the page. Other spellings for the icon:

• "Ø" or "Ø" to enter "Ø";
• “Ø” or “ø” is used to enter “ø”.

Entering the diameter icon is a completely normal operation, even though it is not on the keyboard. ASCII codes - The best way create "Ø" - use ASCII code. It is not necessary to know it by heart, it is enough to ask in the search engine "ASCII-code of the diameter".