Correction of the error "The server denied access via the POP3 protocol" when connecting to Gmail! Email Error Codes Errors That May Appear After Configuring Mail

Talking about collecting mail in my articles, I remembered the nuances of collecting from the GMail mail service. The fact is that it is with this mail service that problems most often arise during the collection of mail. All because of its powerful security, which sometimes reaches the level of insanity :) I, of course, only FOR the high security of any services, but in the case of GMail it sometimes goes beyond all boundaries. For example, we are trying to collect mail from our Gmail inbox, but the process does not go, because Google blocks the connection attempt for no particular reason. Having faced a similar problem several times, I decided to write about the causes of the occurrence, possible options problems and ways to solve it.

Problems that often arise when collecting emails from GMail mailboxes and their solution

When collecting letters from any Gmail boxes, very often users encounter an error "The server denied POP3 access for the given username and password".

Below we will analyze 2 main problems due to which such an error can occur and how to fix them.

Of course, such an error can also occur due to an incorrectly entered username and password from the second mail. As trivial as it sounds, make sure you enter this information correctly!

Problem # 1. POP3 access is not enabled in the connected Gmail inbox

Before digging in the direction of security, you need to make sure that POP access is enabled in your plug-in box in the settings.

To check if POP access is enabled, go to the mail settings (gear-shaped button) and on the Forwarding and POP / IMAP tab, in the POP access section, check the Enable POP for all emails section.

If this function is not enabled there, then you will not be able to connect the box! If POP access is enabled, then look further ...

Problem # 2. Blocking access to connected mail for security reasons Google

As a rule, access to connected mail can be blocked because of the suspicious location from where the second mail is logged in and / or because of the suspicious application from where the logon is made. Everything would be clear if this system always worked correctly for Google. But very often it happens that access is blocked and a message about blocking access is received on the connected one, while some strange location is indicated (for example, New York) and an unsafe application is reported. Example of a letter:

And this despite the fact that the entrance to the second box is performed exactly from the same computer as in the main one, there is one location (obviously not the United States) and at the same time there can be no question of any application, all the more unsafe :) That is. Google can be 100% wrong in the location, as well as in the fact that you are trying to enter the mail through some kind of application.

Several times I encountered a similar problem and in all cases the location was determined incorrectly and no programs were installed on the computer at all that would somehow change the IP address, which could change the location.

Solution

First of all, if access to connected mail is blocked, you need to:


Conclusion

These are the nuances that can be when setting up the collection of mail from Gmail boxes. The collection process itself is simple, there are no complicated settings, as in any other services, but security is often “naughty”, goes over the edge and causes inconvenience. Hopefully the information in this article will help someone.

Good day, colleagues! Today I tried to set up sending messages from 1C and faced the problem of sending messages. As it turned out, it all came down to the settings. Well, let's take everything in order.

Setting up an email account

To send mail, you need to set up a primary account. To do this, you need to go:

Administration | Organizer | Setting up system recording Email

In the "Organizer" panel, do not forget to check the "Mail client" box to use the capabilities of the built-in program mail client for interactions using emails(e-mail).

Sending letters tab

Errors that may appear after setting up mail

At first there was an error like this:

Verification of account settings completed with errors: Error sending message: An error occurred while working with SMTP. Error code: 535. Server response: 5.7.8 Username and Password not accepted.

I looked at the forums, changed the settings in 1C, nothing helped and another comes out:

Error sending message: An error occurred while working with SMTP. Error code 534. Server response: 5.7.14 Error accessing the server of incoming messages. An error occurred while working with POP3: Error code 6. Server response: Web login required.

Correcting errors after setup

The article starts with a screenshot of how to troubleshoot login issues. gmail account... It has an underlined link that leads to a page where unverified applications can be given access. Here is this link: https://www.google.com/settings/security/lesssecureapps. By clicking on it, you will see the same page as in the screenshot below:

Allowing unverified apps to access your account

I hope this article will help you solve the problem with setting up mail in 1C 8.

Common Errors / WINSOCK Errors / SMTP Protocol Errors / POP3 Version 3 Errors / NNTP Protocol Errors / Service Errors remote access RAS / IMAP Errors

Common mistakes

0x800CCC00 LOAD_SICILY_FAILED Authentication won't load

  1. Try to close and restart Outlook Express
  2. If you still receive the same error, wait 20-30 minutes for the server to reset the account and try again
  3. This could be a corrupted account in Outlook Express... Try to set up a second account and see if it works

0x800CCC01 INVALID_CERT_CN Invalid certificate content

0x800CCC02 INVALID_CERT_DATE Invalid certificate date

Receive new certificate republished on your authority server

0x800CCC03 ALREADY_CONNECTED User is already connected

  1. You can log on to a different machine.
  2. Close all connections on all machines, wait 20-30 minutes and try again
  3. Some mail servers will not recognize improper disconnection. This will result in the Poplocked being count. Either wait 20-30 minutes for the timeout to occur, or have someone stop the mail retrieval task that is running on your account. This can only be done normally with accounts that are UNIX shells

0x800CCC04 CONN

0x800CCC05 NOT_CONNECTED No connection to server

  1. Can't get the webpage? If yes, then perhaps the wrong mail server entered in the account settings or the server may be unavailable
  2. If you cannot get the web page, then disconnect and try to connect again
  3. Restart your computer and try again
  4. If it still doesn’t work and you don’t receive any web pages, then data may be transmitted over the network as expected. Verify DNS settings, uninstall and reinstall TCP / IP in Control Panel> Network.
  5. You can try to delete the DNS cache using the ipconfig / flushdns command (Start -> All Programs -> Accessories ->

0x800CCC06 CONN_SEND

0x800CCC07 WOULD_BLOCK

0x800CCC08 INVALID_STATE

0x800CCC09 CONN_RECV

0x800CCC0A INCOMPLETE Message not fully loaded

0x800CCC0B BUSY Server or message delivery service is busy

  1. Try to do the receive / send email actions about once every 5 minutes. Also, notify support to make sure the server hasn't crashed.
  2. You can log on to a different machine. Close all connections on all machines, wait 20-30 minutes and try again.
  3. Some mail servers will not recognize improper disconnection. This will result in the 'Poplocked. Either wait 20-30 minutes for the action to time out, or have someone interrupt the task for your account mail server... This can only be done with UNIX accounts.
  4. If you are not already logged in on another computer, then someone may be using your account, or something is wrong with your account

0x800CCC0C NOT_INIT

0x800CCC0D CANT_FIND_HOST Can't find the server

  1. This error can appear if you have the ‘notify me if there are any new newsgroups’ option selected, but do not have a news account created. Go to Tools> Internet Options> General TAB (TOOLS> OPTIONS>
  2. If Norton Anti-Virus is installed, then there may be a problem with it.
  6. If it still doesn’t work and you don’t receive any web pages, then data may be transmitted over the network as expected. Check DNS settings, uninstall and reinstall TCP / IP in Control Panel> Network.
  7. You can try to delete the DNS cache using the ipconfig / flushdns command (Start -> All Programs -> Accessories -> Command Line. Enter ipconfig / flushdns into the command line)

0x800CCC0E FAILED_TO_CONNECT Can't connect to server

  1. This error can appear if you have the ‘notify me if there are any new newsgroups’ option selected but do not have a news account created. Go to Tools> Internet Options> General TAB (TOOLS> OPTIONS> GENERAL TAB) and disable this option.
  2. If Norton Anti-Virus is installed, then there may be a problem with it.
  3. Can you open web pages? If this is the case, then you may simply have entered the wrong address of the mail server into your account, or the server may be unavailable right now.
  4. If you cannot open web pages, then disconnect the Internet connection and try to connect again
  5. Restart your computer and try again.
  6. If it still doesn’t work and you don’t receive any web pages, then data may be transmitted over the network as expected. Check DNS settings, uninstall and reinstall TCP / IP in Control Panel> Network.
  7. You can try to delete the DNS cache using the ipconfig / flushdns command (Start -> All Programs -> Accessories -> Command Line. Enter ipconfig / flushdns into the command line)

0x800CCC0F CONNECTION_DROPPED Connection closed (see kb 813514)

  1. Modem or network cable has been disabled.
  2. If this happens frequently, try updating your modem drivers or adding an initialization string.
  3. A possible cause could be a "too noisy" communication line.

0x800CCC10 INVALID_ADDRESS Unknown address on the server

Check spelling in the TO field: Delete old messages from your Outbox, then try again.

0x800CCC11 INVALID_ADDRESS_LIST Unknown mailing list on server

  1. Check the spelling of the address list and try again.
  2. Check with your administrator (if any) to see if you have correct access to the list from the terminal you are using.
  3. Check the address that you wrote in the "To" field (you may have entered the address incorrectly).

0x800CCC12 SOCKET_READ_ERROR Unable to send WINSOCK request

  1. Remove TCP / IP protocol and reinstall it. V Windows setting do it through Start -> Control Panel ->
  2. This very often happens if your computer is infected with some kind of virus. Check it out!
  3. You can "reset" winsock with the netsh winsock reset command (entered in command line). Everything network connections when executed, it will burst.

0x800CCC13 SOCKET_WRITE_ERROR Can't read Winsock response

  1. This error sometimes occurs when trying to download e-mail messages with file attachments. Having programs like NetNanny can cause this error. Disable programs - maybe this will help resolve the error.
  2. Remove TCP / IP protocol and reinstall it. In Windows, make the settings through Start -> Control Panel -> Network. NOTE: You may need your Windows CD to complete this task!

0x800CCC14 SOCKET_INIT_ERROR Unable to initialize Winsock

Remove TCP / IP protocol and reinstall it. In Windows, make the settings through Start -> Control Panel -> Network. NOTE: You may need your Windows CD to complete this task!

0x800CCC15 SOCKET_CONNECT_ERROR Can't open Windows Socket

Remove TCP / IP protocol and reinstall it. In Windows, make the settings through Start -> Control Panel -> Network. NOTE: You may need your Windows CD to complete this task!

0x800CCC16 INVALID_ACCOUNT Not recognized Account user

Check the spelling of the account name and re-enter the password

0x800CCC17 USER_CANCEL User canceled the operation

  1. You have pressed the cancel button.
  2. You cannot receive mail if the mailing header is missing, as this is not RFC compliant. You may have damaged or very large file attachments on the mail server.
  3. If you click "cancel" because this operation takes a long time, then the pop3uidl file may be damaged. Close your internet connection and all other programs. Find and delete the pop3uidl. Try again.
  4. If the error is the same, then repeat step 3 and reboot before trying to check your mail again.

0x800CCC18 SICILY_LOGON_FAILED Login attempt failed

  1. Check the account details making sure the password / username is not case sensitive. Restart your computer and try to connect again.
  2. Create a separate personality and see if it will be logged in from this identity with the same information.
  3. Make sure your account is still active.

0x800CCC19 TIMEOUT

  1. This is possibly caused by a corrupted pop3uidl file. Close the Internet access and that's it open programs... Find the file “pop3uidl and delete it. Try to connect again: it might work.
  2. Repeat step 1 with a reboot before checking your mail again
  3. You may have a corrupted account or a very large attachment file on your mail server. Large file attachments, mail attachments, or missing headers or non-RFC compliant attachments can cause this error.
  4. Do you really have an internet connection? Are you sure?

0x800CCC1A SECURE_CONNECT_FAILED Cannot Connect Using Secure Sockets Layer (SSL)

Your provider does not need SSL connection... Turn off SSL in email account properties and try again.

WINSOCK errors
0x800CCC40 WINSOCK_WSASYSNOTREADY The network subsystem cannot be used

0x800CCC41 WINSOCK_WSAVERNOTSUPPORTED Windows Sockets does not support this application

0x800CCC42 WINSOCK_WSAEPROCLIM

0x800CCC43 WINSOCK_WSAEFAULT Wrong address

0x800CCC44 WINSOCK_FAILED_WSASTARTUP Windows Sockets cannot load

0x800CCC45 WINSOCK_WSAEINPROGRESS The operation is in progress. This error occurs when calling the Windows Sockets API while a blocking function is executing

SMTP protocol errors

0x800CCC60 SMTP_RESPONSE_ERROR Invalid answer

0x800CCC61 SMTP_UNKNOWN_RESPONSE_CODE Unknown error code

0x800CCC62 SMTP_500_SYNTAX_ERROR Syntax error

0x800CCC63 SMTP_501_PARAM_SYNTAX Incorrect parameter syntax

Command failed

0x800CCC65 SMTP_503_COMMAND_SEQ Invalid command sequence

0x800CCC66 SMTP_504_COMMAND_PARAM_NOTIMPL Command failed

0x800CCC64 SMTP_502_COMMAND_NOTIMPL Command not available

0x800CCC68 SMTP_450_MAILBOX_BUSY The mailbox is blocked and busy

0x800CCC69 SMTP_550_MAILBOX_NOT_FOUND Mailbox not found

The mailbox was not found. Most likely there is an error in the sender's address and / or the account has been deleted on the server.

0x800CCC6A SMTP_451_ERROR_PROCESSING Error processing request

0x800CCC6B SMTP_551_USER_NOT_LOCAL The user's mailbox is known, but it is not on this server

0x800CCC6C SMTP_452_NO_SYSTEM_STORAGE No free space to store messages

The mailbox limit has been reached. you need to contact your system administrator with a description of this problem.

0x800CCC6D SMTP_552_STORAGE_OVERFLOW Storage limit exceeded

In the repository where the mailbox ended free place... contact your system administrator.

0x800CCC6E SMTP_553_MAILBOX_NAME_SYNTAX Invalid mailbox name syntax

0x800CCC6F SMTP_554_TRANSACT_FAILED Failed to complete transaction

0x800CCC78 SMTP_REJECTED_SENDER Unknown sender.

This is caused by an invalid address in the ‘Reply’ field.

0x800CCC79 SMTP_REJECTED_RECIPIENTS Server rejected recipients

0x800CCC7A SMTP_NO_SENDER Sender address not specified

The sender is not specified in the "From" field.

0x800CCC7B SMTP_NO_RECIPIENTS Recipients not specified

Recipients are not specified in the "To" field

POP3 version 3 protocol errors

0x800420CB POP3_NO_STORE Mail cannot be stored on the server

0x800CCC90 POP3_RESPONSE_ERROR Invalid client response

0x800CCC91 POP3_INVALID_USER_NAME Invalid username or user not found

0x800CCC92 POP3_INVALID_PASSWORD Invalid password for account

0x800CCC93 POP3_PARSE_FAILURE Can't interpret the response

0x800CCC94 POP3_NEED_STAT Requires STAT command

0x800CCC95 POP3_NO_MESSAGES No messages on the server

0x800CCC97 POP3_POPID_OUT_OF_RANGE Message code out of range

HTTPMail errors

0x800CCC31 Bad request configuration or malformed request

NNTP protocol errors

0x800CCCA0 NNTP_RESPONSE_ERROR News server response error

0x800CCCA1 NNTP_NEWGROUPS_FAILED Can't access newsgroup

0x800CCCA2 NNTP_LIST_FAILED LIST command for server failed

0x800CCCA3 NNTP_LISTGROUP_FAILED Can't display list

0x800CCCA4 NNTP_GROUP_FAILED Can't open group

0x800CCCA5 NNTP_GROUP_NOTFOUND There is no group on the server

0x800CCCA6 NNTP_ARTICLE_FAILED No message on server

0x800CCCA7 NNTP_HEAD_FAILED Message header not found

0x800CCCA8 NNTP_BODY_FAILED Message body not found

0x800CCCA9 NNTP_POST_FAILED Unable to send to server

0x800CCCAA NNTP_NEXT_FAILED Can't open the next message

0x800CCCAB NNTP_DATE_FAILED Can't display data

0x800CCCAC NNTP_HEADERS_FAILED Can't display headers

0x800CCCAD NNTP_XHDR_FAILED Can't display MIME headers

0x800CCCAE NNTP_INVALID_USERPASS Invalid user password

Remote Access RAS errors

0x800CCCC2 RAS_NOT_INSTALLED RAS / DUN not installed

0x800CCCC3 RAS_PROCS_NOT_FOUND RAS / DUN process not found

0x800CCCC4 RAS_ERROR RAS / DUN error returned

0x800CCCC5 RAS_INVALID_CONNECTOID Connection broken or missing

0x800CCCC6 RAS_GET_DIAL_PARAMS Error getting dialing parameters

IMAP protocol errors

0x800CCCD1 IMAP_LOGINFAILURE Can't sign in

0x800CCCD2 IMAP_TAGGED_NO_RESPONSE Post marked

The error occurs when you try to receive messages from the POP3 server.

0x800CCCD3 IMAP_BAD_RESPONSE Invalid response to request

0x800CCCD4 IMAP_SVR_SYNTAXERR Syntax error

0x800CCCD5 IMAP_NOTIMAPSERVER Server is not IMAP

0x800CCCD6 IMAP_BUFFER_OVERFLOW Buffer limit exceeded

0x800CCCD7 IMAP_RECVR_ERROR Recovery error

0x800CCCD8 IMAP_INCOMPLETE_LINE Incomplete data

0x800CCCD9 IMAP_CONNECTION_REFUSED Connection prohibited

0x800CCCDA IMAP_UNRECOGNIZED_RESP Unknown answer

0x800CCCDB IMAP_CHANGEDUID User code changed

0x800CCCDC IMAP_UIDORDER Command user code failed

0x800CCCDD IMAP_UNSOLICITED_BYE Unexpected disconnection

0x800CCCDE IMAP_IMPROPER_SVRSTATE Invalid server state

0x800CCCDF IMAP_AUTH_NOT_POSSIBLE Unable to authorize client

0x800CCCE0 IMAP_OUT_OF_AUTH_METHODS No more authentication types

We are looking for solutions to all of the above error codes. If you know the solution, help other people. leave your solution in the comments.

No related posts ...

Fitting © 2021 Tech Look - Gadgets. Android device. Antiviruses. Security. Graphics. Internet. Mobile devices