How to set a new password on the router. Set a password for the router now. How easy it is to put a password on your home Wi-Fi network. Saving the changes made

The DIR-300 router from D-Link is one of the most widespread routers in Russia. The connection it provides is optimal for small networks (for example, home).

Security is one of the most important elements of the Internet. To avoid getting unauthorized access to your personal Internet channel, you should set a password for the WiFi network. As an example, let's try to put the password on WiFi D-link DIR-300.

Fast navigation through the article

Router control panel

Setting up access to the WiFi network is carried out from the router settings menu. Regardless of the type of device, the first step is to configure it. You can enter the corresponding control panel in the following way:

• Connect the router to the computer (it doesn't matter if using a cable or wirelessly) and enable it;
• Launch a browser on a connected computer (for example, Internet Explorer);
• Enter "192.168.0.1" in the address bar or, if unsuccessful, "192.168.1.1" (without quotes);
• Enter the default values ​​in the login and password request windows: "admin" (without quotes). If the password has been changed before, you must enter a new one.

If none of the passwords is suitable, you need to reset all the settings of the router by pressing the "reset" button on the device and enter the standard bundle (either: login admin, password admin, or: login: admin, and leave the password blank - depending on the firmware version of the router ).

The exact IP address for accessing the control panel, as well as the login and password for specific model the router must be specified either in the instructions or on the device itself.

Setting WiFi password

If you managed to access the settings menu of the router, you can start setting a password for the WiFi connection. Depending on the firmware version, this can be done in several ways.

Setting on new firmware D-link DIR-300 version 1.4:

• After successful authorization in the control panel of the router, you need to click "Advanced settings";
• On the WIFI tab, go to "Security Settings" -> "Network Authentication";
• Select "WPA2-PSK" (the best encryption algorithm from the list);
• In the "PSK encryption key" field, enter a new password (please note that the password must be non-standard and consist of at least 8 characters, include capital letters and numbers);
• Click "Change" -> "Save".

For old D-link DIR-300 (versions 1.3 and below), the sequence is somewhat different:

• Click "Configure manually" -> "Wi-Fi" -> "Security settings";
• In the "Network Authentication" column, set the same "WPA2-PSK";
• In the column "PSK encryption key" enter the desired password, taking into account the above security rules;
• Click "Save".

I welcome everyone! Recently I was asked to tell you how to put a password on a wifi router, otherwise people are tired of distributing their Internet to neighbors.

Of course, Wi-Fi has become a very popular wireless network, which is especially attractive for users of tablets, smartphones, and laptops. But quite often ordinary PCs also connect to the Wi-Fi network. This technology is also good because there will be no stupid wires in the apartment or office that spoil the surrounding view, as well as the design. However, do not forget about the security of such a network. When users set up a Wi-fi network, most do not even know where the Wi-Fi password is put. Thus, the network will not have protection, and anyone can connect to it. Let's solve this problem.

How to put a password on a wifi router? 3 easy steps!

In fact, to learn about how to deliver or it can be a difficult businessman. This is explained by the fact that today the number of manufacturers of wireless routers is constantly growing. Each manufacturer uses its own shell to configure the router. To make it a little easier for you, we will set a password for Wi-Fi in stages.

Step # 1. We open the web interface of the router.

Any modern router is configured using the web interface. Don't be intimidated by the word "web interface". In other words, this is an ordinary small site that has a router, while the site opens in any browser.

We use our favorite browser, go to the address bar, enter the IP address of the router there, often these are addresses:

• 192.168.0.1
• or 192.168.1.1.

If you do not know which one to enter, you can simply enter them one by one. As soon as you have entered the IP-address of the router, you will see a form in which you must enter your login and password to access. After you have entered the username and password, you will see the router's web interface. In the picture below, you can see the web interface for ASUS.

Step # 2. Find the section with WI-FI settings.

We study the web interface in more detail, while noticing the section where they are produced. There you can either put a password or change it.

As we see on ASUS example in order to access the section, you need to go to the "Wireless network" link, and then go to "Advanced settings".

Step # 3. We put the password on the WI-FI router.

In the section with settings from WI-FI, select the authentication method, then the encryption algorithm, and then enter the key password) to access WI-FI.

1. Where "authentication" stands, you must select WPA2. This is a novelty and at the same time a good option security.
2. Let's put the encryption algorithm "AES".
3. Well, do not forget about the password for WI-FI itself. To do this, use the "Key" field, and enter there a set of numbers and letters.

After the settings made, do not forget to save, and then, if necessary, restart the router itself.

Such actions are enough to set up a password for WI-FI. Upon further connection to the network,.

That's all for me! I hope you already know how to put a password on a wifi network in just a couple of clicks. If you still have questions for me, please ask them in the comments. And do not forget to enter your email address and receive my lessons on it. Peace for everyone!

From Uv. Evgeny Kryzhanovsky

The topic of this article is how to put a password on a WiFi network. Such networks are widespread. Almost every home already has a wireless router or modem. But, the manufacturer does not install keys for connecting via wireless communication... This is done so that the buyer can freely enter the settings menu and set his own values.

It should be noted that after the purchase and the first connection to the interface, the manufacturer strongly recommends installing a new key to access the settings. On some models of routers, the user is not even given the right to choose. That is, you will definitely have to change your username and password. It is also recommended to make security settings.

So how to put a password on WiFi network... To begin with, let's answer the question why this is necessary. The fact is that an access point, be it a router or a wireless modem, has a fairly large range. This means that not only you will be able to connect to the created group.

Very often this is used by intruders or simply lovers of "freebies". But if you do not have unlimited Internet (a package of services from a provider), then such unauthorized guests can seriously harm you. In addition, you risk losing confidential data or getting a virus on your computer. Therefore, manufacturers wireless equipment it is highly recommended to set complex passwords.

How to put a password on WiFi: Video

How to encrypt your home Wi-Fi network

So we come to the main question, how to put a password on private network WiFi. As you already know, to organize such groups, routers, modems, or other devices that have a wireless adapter are used. V this case it will be about routers. All security settings are set exactly in the parameters of the router. Therefore, first, let's enter the device settings menu.

We will look at how to set a password for a WiFi Internet connection using the D-LinkDIR-615 router as an example. So, we connect to the device using a cable or wirelessly. Now you need to open your browser. V address bar register the IP of your router. In my case, the address is 192.168.0.1.

It should be noted that this IP address is used in most cases. But, sometimes you can find such - 192.168.1.1, or 192.168.2.1. As a rule, all the necessary data is indicated in the instructions for the device or on the router itself (carefully examine the router from all sides).

How to easily find out the IP address of a WiFi router: Video

Press "Enter". Now the system asks you to enter your username and password. Initially, the equipment manufacturer sets these values ​​- admin, admin, respectively. Click "OK" and get into the settings menu.

How to put a password on your home WiFi internet here? Everything is very simple. At the bottom of the screen you need to find and click the "Advanced settings" button. After that, several additional windows will appear. We are interested in the "WiFi" section, in which you should enter the security settings.

In the window that opens, you can change only one parameter - network authentication. This is nothing more than a type of encryption. The default is Open. This means that at the moment your network is not protected in any way. So, we need to choose the type of encryption. It is recommended to install WPA-PSKWPA2-PSKmixed as it is the strongest cipher and provides a high level of security.

After that, a line will appear in which you must enter the key. In some cases, the system automatically generates a secure code and offers it. You, in turn, can leave it or change it to your own. After that, click "Apply". That's all, now you know how to deliver.

How to connect to a WiFi router: Video

But what if you are using a modem and not a router? How to put a password on a wireless internet WiFi modem? Everything is extremely simple. The point is that the settings wireless router absolutely identical to the parameters of the modem. These devices work in a similar way. Differences are only in the titles of some sections. However, the principle of adjustment is the same.

Just like in the case of a router, you need to connect to the device and register the IP address in the browser. After that, enter your username and password (admin, admin) and get to the modem menu. Find WiFi settings here and open security options. Then everything is as described above. Now you know the answer to the question of how to put a password on a private WiFi network. This will increase the level of security and prevent unauthorized connections by intruders.

If it so happens that your WiFi router provides an unsecured access point to the Internet, and you want your Internet to be used exclusively by you, then it will be useful to know how to put a password on WiFi router... Manufacturers such as: D-link, TP-Link, Zyxel and others. On the blog, I have already discussed this issue in several of my articles, but this article will differ in that I will not talk about one router model (as I did for an example), but several, and to be more precise, I will talk about the most popular manufacturers of routers.

Of course, I will not be able to cover the large circle of manufacturers that are now, but after reading the article, I think you will certainly have an idea of ​​how to change the password for WiFi.

In order to protect your access point with a password, you need to configure the router by going to its settings. You will need to find out the IP address of the router in order to access its control panel.

How to find out the IP address of the router, login and password to configure it

The easiest way to find out the IP address of your router is to take a close look at its enclosure. Most often, the IP address is listed on it. It may also contain a username and password that you will need to enter the control panel. In addition, the IP address, username and password can be specified in the manual for the router. You can also see them on the official website of the manufacturer.

Here's an example:

If the described methods did not help you or for some reason turned out to be difficult to implement, then there is the most correct and accurate method for determining the address of the router. Go to the Network and Sharing Center. This can be done by clicking the icon in the tray of the Windows taskbar and clicking on the corresponding inscription.

Once in the network control center and general access, click on the left "Change adapter settings", thereby opening the list of available connections. Find "Local Area Connection" (if your router is connected via a cable) or "Wireless Network Connection" (if you are connected to the router via a wireless connection, that is, WiFi) and clicking on the icon right click mouse, select "Status".

Then click Details. The router's IP address is listed next to the "IPv4 Default Gateway" line.

Attention! This method will help you when you can connect to your router via WiFi or cable. If you are only going to customize it, then this will not work for you!

If DHCP is not configured on the router, then read the articles that I gave above. There you will learn what needs to be done.

Now that we know the IP address of the wireless router, it's time to start configuring it. To do this, in the address bar of the browser, enter the IP address of the router and press Enter. The login page to the router control panel will open, in which we will need to enter a username and password. More often these values both fields "admin"... Manufacturers have options: admin and blank password, user - user, administrator - administrator, administrator and blank password.

But again, I want to remind you, so as not to guess, you can familiarize yourself with this information in the technical documentation that is attached to the router, or carefully examine the router at the bottom of it. Once you have access to the control panel, you can now move on to the main part of our procedure, namely, how to set a password on WiFi.

TP-LINK

How to set a password for WiFi in TP-LINK: on the left in the menu, find the "Wireless" section, the "Wireless Security" subsection. In the main part, select "WPA-PSK / WPA2 PSK". In the “Wireless password” field, enter the desired password (at least 8 characters). Click the "Save" button and reboot the router.

Now you need to enter a password to connect to your router.

ZyXEL

Going into the control panel of the router, we find the section "Wi-Fi network" on the left and select the subsection "Security" in it. The Wi-Fi Security Settings window appears. Opposite the line "Authentication" we select from the drop-down list "WPA-PSK / WPA2-PSK", and opposite the line "Network key (ASCII)" enter the password we have invented. Click "Apply" and reboot the router:

D-Link

Above, we have disassembled horizontal menus controls, and now let's look at the vertical ones from the D-Link manufacturers. How to set a password for WiFi in D - link: after opening the control panel, click "Wi-FI" and select "Basic settings":

In the window that opens, set the network name (SSID) and click "Change". This must be done if you have not used the WiFi function in your router. If your router has already distributed WiFi and you just need to set a password, then go to the "Security Settings" tab.

In this tab, you just set the password for WiFi. Select the type of encryption "WPA2-PSK", in the line "PSK encryption key" enter your invented password to the access point. Click "Change" and reboot the router.

Note: In each case, I told you to reboot the router after changing the password, and this point is sometimes very important so that everything goes smoothly. Sometimes, when changing the settings in the router, overlaps happen and for all the changes to apply, just in case it is better to restart the router. While this is optional, you should be aware of it.

It so happens that you did not buy a new router in the store, but borrowed it from a friend or bought it used. In this case, the default settings of the manufacturer can be changed in the router, that is, for example, the IP address, login and password for entering the control panel of the router can be changed. In this case, you need to reset the router settings to factory settings. How it's done?

Routers have a button on the back that is pressed with a thin object, such as a pin. With the router turned on, press and hold it for 6-10 seconds. After that, the IP-address will again become 192.168.1.1 or 192.168.0.1, the login and password will receive the values ​​"admin".

Important! Please note that all the settings of the router will be reset, namely the provider's settings, passwords, access points, IP addresses, etc. Therefore, before performing a general reset, write down or remember everything that may be useful to you.

We have just figured out how to put a password on a Wi-Fi router. In principle, all actions are the same: find the tab with the wireless settings, and then enter your password in the appropriate field. The main thing is not to rush, and everything will be fine! But before setting the password for the wi-fi in the router, you can see this password in Windows - this procedure is easier, so you don't need to deal with IP addresses, logins and passwords. Read about this method by following the links given at the beginning of the article.

Video with an example of how you can set a password on WiFi:

Wi-Fi is a unique technology that provides wireless network access from any device (tablet, smartphone or computer). For this access to work smoothly, competent customization of the Wi-Fi network and the device that guarantees its operation - the router - is required. A router or router is a device that provides capabilities for the reliable functioning of a Wi-Fi network. In order for the Wi-Fi to function stably and without interruptions, the router must be configured correctly. Brief instructions for setting up a wireless network and equipment -.

In the material presented to your attention, I will tell you how to set a password for a Wi-Fi router, as well as how to set a password for a Wi-Fi network so that unauthorized users cannot connect to your network and use Wi-Fi from their devices. We will talk about the ASUS RT-N12E_B1 router, since the devices of this brand are quite popular in the consumer environment, are reliable, easy to configure and available on the market.

How to set a password on an ASUS Wi-Fi router?

The first thing to do before setting a password is to connect the computer with which you plan to configure the router to the router itself using a wire. At the same time, the cable from the provider is connected to the WAN port of the device, and the double-sided PC cable is connected to the LAN port.

When the cable is properly connected, first you need to go to the configuration page of the router settings, where the parameters of access to the provider are set. To know which address to access this page, turn the device upside down and look at the bottom cover for the IP address that can be used to access the settings web page. Also, the username and password, which are used to log in by default, are indicated here.

As you can see, the specified IP address is 192.168.1.1. You can access the web page for configuring the router using the login admin with password admin, but such authentication data is available on all devices without exception for configuring Wi-Fi, therefore given password it is worth changing in any case in order to protect your router from hacking. Read about which passwords to use.

So, we go to the above address. As a result, we got to the device configuration web page. We go to the "Administration" section and there we go to the "System" tab.

As you can see, there is a field "Change router password". This is where we can change the password for our device by entering the updated value in the "New password" field and confirming it in the "Re-enter the new password" field.

So, we changed the password. Now you need to apply the changes and save them to the device. Scroll the page to the bottom and find the "Apply" button. We click it.

Ready. The device will now reboot for the changes to take effect. We log in with a new password.

How to set a password for Wi-Fi on a router?

The Wi-Fi network, like a router, needs to be administered. It is worth choosing the most optimal channel for it, installing gateways and DNS servers, and, of course, also putting a password on it for the sake of security. Below I will tell you how to put a password on a Wi-Fi network.

We go to the "Wireless network" section and stay on the first tab, called "General". In the SSID field, specify the name of the wireless network, which will be visible in the list of networks on your device. Another rather important field is "Authentication Method". Here we specify the security method that will be applied to your network. At home, it would be most advisable to dwell on the "WPA2-Personal" protocol, since it provides a simple authentication procedure and is also quite reliable and stable.

The password itself is set in the "Pre-WPA Key" field. Think of a value that is not too easy for a cracker, and that will contain uppercase and lowercase letters, and also interspersed with numbers. If you find it difficult to find such a key yourself, use one of the online services for randomly generating loops, of which there are plenty on the network.

How to set a password for Wi-Fi on a D-Link router?

On devices of any other models, the password for the wi-fi is set in a completely similar way. Consider the case of a D-Link router. These routers at home are used most often, along with TP-Link. This indicates the high quality of the device and its excellent regional adaptation for the domestic market.

Log in using the IP address indicated on the bottom of the device. By default, like on ASUS routers, the word “admin” is used for authentication as a password and login.

If someone has already set up your device (for example, a computer wizard), it is quite possible that this pair of values ​​will not work. In such circumstances, you need to find out from the person who set up your device what password he set. If this is not possible, all the parameters of the router can be reset by pressing the handle (pressing and holding for 5-10 seconds, then release and wait about a minute) the RESET button on the rear panel of the device. If you decide to perform a reset, it is important to know that all settings will fail, and the Internet will have to be configured from scratch.

On different firmwares of D-Link routers, the interface is very different, but I will mean that you have firmware version 1.4.x or later. At the bottom of the configuration form, click on the "Advanced Settings" option, and then in the Wi-Fi section, click on the "Security Settings" category.

Here, in the PSK encryption key field, enter the current key with which you would like to protect your Wi-Fi connection. After that, at the bottom right, click on the "Change" button. Now we are taken to the next settings page, where we will be prompted to save the changes. Click Save and voila, you're done.

Good afternoon, dear readers. In this article I will tell you how to set a password on a D-Link wi-fi router. Setting a password for wireless Internet (wi-fi) is necessary first of all for the safety and restriction of other users' access to your Internet. A wireless connection is less secure than a wired one. Therefore, if you do not have a password for wi-fi, then anyone can access the Internet through you, as well as gain access to your information.

So let's get down to setting a password on wifi router D-Lin... In order to set a password for wi-fi, follow these steps.

First of all, we need to go to the settings of our router.

Step 1 ... Open a browser on your computer. In the address bar, enter 192.168.1.1 ... This is the address for configuring your wi-fi router.



Step 2 ... Then enter the word admin in the field Username Password . Click the Login button to enter the main menu of the router.

Now almost every family has several Internet users, and in their apartment or house they connect devices to the network via a Wi-Fi router. Initially, no one really thought about how to set a password on WiFi, since there were few such devices and it was not important. Now, many phones, not to mention smartphones, tablets and laptops / netbooks, have a WiFi block, and everyone strives to use the free Internet. We will counteract this!

The point is not even that you are sorry to distribute your traffic to neighbors, for example. The problem is that these neighbors, if they wish, can separate you from their own Internet by putting a code at the entrance, and with a good knowledge of technologies, they can seriously harm your computer.

So the WiFi password? It's not difficult at all if you have everything set up and working and you don't just have the desired code. You need to start by entering Regardless of the router model, enter http://192.168.1.1 or 192.168.10.1 into the browser line. A window will appear requiring you to enter your username and password. If you haven't changed anything, it will be admin in both cases. We type and find ourselves in the device parameters. Now we will perform the following task: in order for it to require digital resolution from everyone entering.

The general design of the settings section may differ slightly for different models, but the system itself, the essence, remains the same. We are looking for the wireless item, one of the options for the path to it: Inetrface setup> wireless. We are considering the English-language version of the menu and the absence of a book with instructions, since if there is a Russian menu, any "teapot" can set up WiFi.

We find the Authentication Type there, select, for example, wpa-psk, or another type of encryption, look for the very place where, finally, you need to enter the password. We enter it - and that's it, it's done. We save the settings, and now no one except people who know the code will connect to your Internet. When deciding how to set a password on WiFi, try to make sure that it cannot be guessed or hacked. Think of a combination of numbers and letters of at least eight characters.

Pay attention to the name of your network. If it looks like the others located nearby, then change it in the SSID line. If you still find it difficult to do all of the above, then invite a specialist or contact the technical support of your provider.

It also happens that the task of how to set a password for WiFi becomes noticeably more complicated if for some reason you did not manage to get into the router interface. In this case, you will have to reset all its settings. To do this, for a few seconds, you need to press the Reset button, which is recessed on the back panel.

Further, in the way described above, we go into its settings. In devices manufactured earlier, it was necessary to manually enter all the settings, having previously taken them from the provider, and partially from the network settings of the computer. Modern routers allow you to access the Internet almost automatically by pressing just a couple of buttons. There are not so few of their models, there are also many providers, so the path to access the network may differ. You can find it out from the latter, or by typing the corresponding request in a search engine. Do not forget the password itself only after completing the connection process!

We will connect and configure your router to the Internet, as well as your laptop, computer, TV, tablet, phone and other devices. Let's create a network for home and office. We work with all providers in Moscow! Call by phone 8-495-410-64-76

The proliferation of laptops, netbooks, smartphones, tablet computers and other devices that have in their functionality work in wireless networks, has led to the fact that every second apartment has its own wireless network... One of the most common devices for organizing a network connection and at the same time creating an access point for connecting to a wireless network is the D-Link DIR-320.

Setting a password for WiFi from manufacturers Asus, TP-Link, D-link, Zyxel, Beeline, Neatgear and other companies follows the same principle

It is an inexpensive piece of equipment that has everything you need to fully enjoy wiring free with a stable and stable network connection.

In order to put a password on WiFi, you need to first connect the router to the computer and then configure the router and then set the password on WiFi. To do this, you need to read the article on how, and also in the section "Configuring the Internet" you will find useful articles about how.

How to set a password for wifi

However, any wireless network needs to be protected. There are several ways to restrict access to wireless networks, the easiest to use and configure is password access.

To do this, you need to run easy setup access to the wireless network on the router and, when new devices are subsequently connected, provide the authorized users of your network with the password for access. It is recommended to change the password from time to time - who knows, perhaps at this moment one of your neighbors is trying to hack your network.

So how do you go about making all the necessary adjustments? We connect the computer to the router and go to the address assigned when setting up the network. This is usually 192.168.0.1

Worth noting

That the IP address of the router for some manufacturers may differ, for many routers, including the company D-link address is 192.168.0.1 for others it can be 192.168.1.1 or 192.168.1.2

If you are unable to access the above IP addresses, then be sure to go here and you will find the required address.

The router requests login and password:

If you have not changed anything, then the admin-admin pair will work, in some cases the password can be empty, or start with capital letter... Additional information can be found on the back of the device or in the documentation. If this is your first time logging in, the system will prompt you to change your password.

This is not the most good idea- as a rule, such passwords are forgotten and you have to reset the router to its original settings.

On the left side there will be menu sections that you can navigate through. We are interested in Wi-Fi setup, therefore, we will perform all further manipulations in this section.

First, let's check that the wireless network is turned on. In chapter " General settings "the wireless network must be enabled, here you can also view the point's parameters, for example, its hardware address.

The initial configuration of the access point can be done in the section " basic settings". Here you can hide the access point, then only those who know what it is called will be able to connect to it. SSID - point identifier, indicated by the next item.

The name can consist of Latin letters and numbers. You can also specify the country, select one of the channels, but in automatic mode the point will still work. Maximum amount clients value equal to zero means no limitation.

Don't forget to save your changes!

Password protection is set in the " Security Settings". In the illustration below, the most secure mode recommended by the manufacturer is selected, in addition, the password for access is also indicated here, do not forget it!

Other settings relate to the key encryption method and the key hash update period. If your device does not work well with the point, periodically reporting a disconnection, then you can try to set the value of the period to zero - perhaps the problem will disappear. However, in this case, the periodic password change becomes mandatory!

What the manufacturer recommends is of course good, but not suitable for all networks in our country, so you can use encryption

All that remains is to save the changes again, restart the router and connect using a password. Remember, your safety is in your hands, so keep it a secret!

If you already had a password on Wi-Fi and you decided to change it, but having changed it you cannot log in with a new password, do not be alarmed. You will need to delete your old Wi-Fi connections in the Wi-Fi panel and then update the connections, after that you can calmly log in with your new password.

If you put a password on Wi-Fi for the first time, you do not need to do this. We hope that ours helped you set up WiFi security, we are waiting for you on our website, please, ask questions.

Good afternoon, dear readers. In this article I will tell you how to put a password on wi-fi D-Link router... Set a password for wireless internet(wi-fi) is necessary primarily for the safety and restriction of access to your Internet for other users. Wireless connection less secure than wired. Therefore, if you do not have a password for wi-fi, then anyone can access the Internet through you, as well as gain access to your information.

So let's get down tosetting a password on a wi-fi router D-Lin k ... In order to set a password for wi-fi, follow these steps.

First of all, we need to go to the settings of our router.

Step 1 ... Open a browser on your computer. In the address bar, enter 192.168.1.1 ... This is the address for configuring your wi-fi router.