Error make sure that the controller of this disk is enabled. Make sure that the controller of this disk is enabled in the bios menu of the computer. Windows cannot be installed on this disc

Computers are complex devices that operate on many different elements. One of them is a SATA controller. What is this device? How to work with him? How to take care of its performance? Here is an incomplete list of questions that will be considered within the framework of our article.

Is a technology by which storage devices like hard disk and optical wire can exchange data over high speed cable with motherboard... It is best to use the connector with the smallest number. SATA0 or SATA1 are considered ideal. It is possible to use other ports.

When working with hard drives, you must initially use SATA0. It is installed on the system media. Each subsequent one must have one more digit, and so on. If there are several hard drives and the RAID mode is applied to increase storage space, one wire is connected to the connector, and then the rest is fed to the controller.

Modes of operation

Controllers determine how HDD will communicate with the motherboard. There can be three principles of interaction in total:

SATA IDE controller operating mode. The easiest option. With it, the hard drive functions as IDE or PATA. In this case, it has limited potential, and also does not differ in speed of work. But this mode is very valuable if you need to ensure interoperability with equipment that is already out of date. It can also be used in cases where the computer has only one hard drive and does not need to be used. various functions drives.
SATA AHCI controller operating mode. In this case, it becomes possible to use the advanced functions of the drives. Examples include Native Command Queuing and hot plugging. Also a significant advantage is the high speed of interaction (when compared with the previous version).
RAID controller operating mode. With this setup, multiple separate hard drives can be configured to create a single storage array. It is distinguished by redundancy of information, as well as higher speed. The first is achieved by creating backup hard drive, and the second - to the bundle disk space... When this mode works, then AHCI also functions with it.

Notes (edit)

Initially, it is necessary to set the operating mode in which the SATA controller for a laptop or computer will function correctly, and only then deal with the operating system. After all, if you do this later, then the OS may work incorrectly up to the point of failure. For example, this can happen due to the fact that the disk driver is disabled or the wrong BIOS setting is used.

Causes of malfunctions

Let's say the PC stopped working with hard disk... This malfunction can have several reasons:

Cables are loose.
The hard drive is out of order.
The SATA controller does not work or slows down.

In the first option, it is necessary to check the tightness of the cable. In the second, most likely, you need to replace the device. And in the third - to expose correct settings... Administrator rights are required for such changes. If they are, then you can proceed to solving the problem.

How to enable the SATA controller in the BIOS of a computer?

Initially, you need to go into the BIOS. There is no single standard - each machine uses a separate dedicated key for this. To find out it, you need to read the instructions on the screen, which appears immediately after turning on the computer. Moreover, for a guaranteed result, it must be pressed more than once.

After the login is successful, you need to find the Integrated Peripherals item. If it is not there, then any one that is consonant in meaning will do. It contains all the parameters that relate to internal capabilities. motherboard... Now you need to find the Onboard SATA Controller. If not, just look for any entry that says "SATA controller". This parameter can only be set to Disabled and Enabled (respectively disabled and enabled). It must be ensured that it is activated.

To save the changes, you can press F10 and the enter button. If this is not done, then the system itself will offer to perform these actions. After that, you should restart the computer and once again go to the BIOS to make sure that the hard drive has been detected. You can understand this thanks to the item Standard CMOS Features. We now know how to enable the SATA controller. Let's take a look at the modes.

AHCI connection

This is done using the same BIOS. To make changes go to the control window. After that, you need to look for IDE, AHCI or RAID. They should come with SATA. Also additionally on some devices the word "MODE" is used. The mode that we do not need is disabled, but the necessary one, on the contrary, is enabled (this is also done by changing Disabled to Enabled and vice versa).

If, when you try to change the mode, a message appears stating that no disk is located, then the necessary drivers are missing. Therefore, you will need to go into the operating system and first install them with administrator rights. This can also be done using the OS installation disc. But the first option is still less time consuming. Also, keep in mind that changes made to the underlying I / O system must be saved in order for them to take effect. How to do this was discussed in the previous paragraph.

All in all, here's how to switch a SATA controller to AHCI mode or another, whichever is necessary. In this case, it is important to follow the instructions exactly so as not to touch anything unnecessary. Now let's take a look at two options that can come in handy when setting up your computer. Moreover, the main topic of the article has already been disclosed, and now we will deepen our knowledge.

SATA Controller Mode

This option is used to specify the operating mode. We have already discussed this. Now let's pay attention to how and what works in this case... If you expose IDE mode, then there will be no need to use additional drivers when working with equipment that uses this technology. The RAID mode is compatible with all operating systems starting from Windows 2000. The only peculiarity is that you will need outdated media for drivers (if the equipment is the same year of release as the operating system). Otherwise, their role can be successfully performed by a Flash drive or CD. But it makes sense to talk about creation only if there are at least two hard disk... The same brand and volume will positively influence their work. And if the parties and firmware coincide, these are the ideal conditions for using this mode.

ANSI is more new technology and is not compatible with old (relatively) systems. Due to the fact that this mode has a positive effect on the speed of technology, it is recommended to stop at it. Moreover, if RAID and ANSI can still be launched on representatives of operating systems and computers starting from the 2000 generation, they will not help with Windows 9x: there are simply no drivers that would combine the work software and equipment. Please note that changes must be made even before the OS is installed. If you change the mode when the operating system is already installed, you can find on your computer “ blue screen death ", which will display information about the error and the impossibility of correct operation. If you don't want to see him and demolish the OS, then you should forcibly change the controller driver to one that will work with the new settings.

The history of development

The first of the family of controllers is considered to be SATA 150. It is an interface that uses a serial data bus. Operates at a frequency of 1.5 GHz, thereby providing throughput 150 Megabytes per second. The standard has spread due to a number of advantages that previous designs did not have. Thus, the architectural advantages of the bus, the small size of the connectors and cable, the ease of use and the overall reliability of the connection played a role. Also, when two devices are connected to the same port, there are no conflicts and no problems.

The second generation SATA 300 delivers 300 Megabytes per second. In theory, both options are compatible, but problems are possible. But, in fairness, it's worth saying that even the most modern hard drives have not yet learned how to act faster than 130 megabytes per second, so there is no special sense in chasing numbers in this case. So there is no difference when using controller types. The only thing that matters is what is connected first.

Conclusion

The SATA controller is definitely an essential part of any computer. It is a device that allows us to access data that is of value. Also deserves special attention what success the developers of this part have achieved in terms of speed. In addition, this suggests that there is a significant reserve for increasing the capacity of hard drives without refining the data transfer technology, which makes it unlikely that it will become obsolete and unnecessary in the next few decades.

In this manual, in detail about what to do if during the installation of Windows you are told that it is impossible to install Windows in the disk partition, and in detail - “ Installing Windows on this disc impossible. The computer hardware may not support booting from this disc. Make sure the controller for this drive is enabled in the BIOS menu of your computer. "

If you do select this section and click "Next" in the installer, you will see an error stating that we could not create a new or find an existing section, prompting you to view additional information in the installer log files. Below we will describe how to fix this error (which can occur in Windows 10 - Windows 7 setup programs).

As more and more users come across a variety of disk partition tables (GPT and MBR), HDD operating modes (AHCI and IDE), and boot types (EFI and Legacy) on computers and laptops, errors during the installation of Windows 10 are becoming more frequent. 8 or Windows 7 caused by these options. The described case is just one of such errors.

Note: if the message stating that installation on a disk is not possible is accompanied by information about error 0x80300002 or the text "This disk may be out of order soon" - this may be caused by poor connection of the disk or SATA cables, as well as damage to the drive itself or cables. This case is not covered in the current material.

Correction of the error "Installation on this disk is not possible" using BIOS settings (UEFI).

Often specified error occurs when installing Windows 7 on old computers with BIOS and Legacy boot, in those cases when the AHCI mode (or any RAID, SCSI modes) is enabled in the BIOS in the operating parameters of SATA devices (that is, the hard disk).

The solution in this particular case is to go into the BIOS parameters and change the operating mode of the hard drive to IDE. As a rule, this is done somewhere in the Integrated Peripherals - SATA Mode section of the BIOS settings (several examples in the screenshot).

But even if you don't have an “old” computer or laptop, this option can also work. If you are installing Windows 10 or 8, then instead of enabling IDE mode, I recommend:

Enable EFI Boot in UEFI (if supported).
Boot from the installation drive (flash drive) and try the installation.

True, in this version you may encounter another type of error, the text of which will inform you that the selected disk contains an MBR partition table (the instructions for fixing are mentioned at the beginning of this article).

Why this is happening, I myself did not fully understand (after all, the AHCI drivers are included in Windows images 7 and higher). Moreover, I was able to reproduce the error for installing Windows 10 (the screenshots are just from there) - just changing the disk controller from IDE to SCSI for virtual machine Hyper-V "first generation" (that is, with BIOS).

Whether the specified error will appear during EFI boot and installation on a disk operating in IDE mode, I could not check, but I admit it (in this case, we try to enable AHCI for SATA drives in UEFI).

Third-party disk controller drivers AHCI, SCSI, RAID.

In some cases, the problem is caused by the specificity of the user's equipment. The most common options are laptop caching SSDs, multi-disk configurations, RAID arrays, and SCSI cards.

If you have reason to believe that the hardware features are the cause of the error "Windows installation is not possible on this disk," the first thing to do is to go to the official website of the laptop or motherboard manufacturer and see if there are any drivers there (as a rule, provided as an archive, not an installer) for SATA devices.

If so, download, unpack the files to a USB flash drive (there are usually inf and sys driver files), and in the window for selecting a partition for installing Windows, click "Load driver" and specify the path to the driver file. And after its installation, it becomes possible to install the system on the selected hard disk.

We hope that this material will help you cope with your problem. If you have any questions, or if there are additions, write in the comments.

During the installation of the operating room Windows systems 10, various errors can occur. They are usually associated with incorrect settings BIOS or incorrect work components of a computer or laptop. One of the most common mistakes sounds like this: “Windows cannot be installed on this disk. Your computer's hardware may not support booting from this disc. Make sure the controller for this disk is enabled in the BIOS menu of your computer. " Yes, there are troubles when the disk is really cut off and no longer works. But more often than not, the reason is different.

The most common reason for this malfunction is the settings of the SATA controller when working with old hard drives. Try to start, when you turn on the PC, go into the BIOS and change the controller operation mode from ACHI to IDE.

On more modern motherboards with UEFI instead of the regular BIOS, switching to Legacy mode may help.

If none of these manipulations helps, then return everything as it was. The reason is most likely different.

Sometimes the error "Make sure that the controller of this disk is enabled in the BIOS menu of the computer" may appear because it is crooked boot record hard disk and it needs to be restored. To do this, when starting the installation operating system Windows 10 click on the "System Restore" button and go to the "Diagnostics" >> "Advanced options" >> "Command Prompt" menu, or just press the combination Shift keys+ F10. A black Windows console window will appear:

In turn, we type the commands:

Bootrec / fixmbr bootrec / fixboot bootrec / RebuildBcd

Each of them should complete successfully. After that, we restart the PC and try to start the installation again. Usually this is a disk controller error in the menu bios computer it is solved and then everything goes on without any problems.

set-os.ru

Windows cannot be installed to disk

During the installation of the operating system, at the stage of formatting disks and creating partitions, the user may encounter the error “Installing Windows on this disk is not possible. The computer hardware may not support booting from this disc. Make sure the controller for this disk is enabled in the BIOS menu of your computer. "

Why does this error occur and how to fix it?

See also: Codes Windows errors 10 and how to troubleshoot

Ways to solve the problem

Often, the error when it is impossible to create a partition for installing a new operating system occurs on old PCs with Windows 7. However, other operating systems, from XP to Windows 10, are also not immune from such a problem.

The following factors can be the cause of this error:

Incorrect settings of SATA parameters;
Hardware specifics (availability of additional SSD and SCSI cards).

Method number 1. Via BIOS settings

To fix this error, it is worth booting into the BIOS and setting the IDE hard drive mode. To do this, do the following:

Reboot the PC and press "F8" several times to get into the BIOS.
Find the section "Advanced" or "Integrated Peripherals" and select the item "SATA Mode" or "SATA Raid", "Configuration SATA" (the path to the settings depends on the motherboard model). We change the mode of work with AHCI or another on the IDE.

We press "F10" and restart the PC. We repeat the installation of the system.

If your PC has new firmware BIOS, you should enable EFI boot instead of IDE mode. To do this, do the following:

Boot into BOIS-UEFI and go to the "Boot" section. We find the item "UEFI / Legasy Boot" and set "Enabled".

We save the changes and restart the PC.

It should be noted that with this change, it is possible that a new error will appear, which is associated with the MBR or GTP partitions.

Read also: How to install Windows 10 to a GPT and MBR disk?

If your PC or laptop has an additional cached SSD or other storage device, it may be the cause of the problem. To fix the problem, follow these steps:

We determine the model and version of the device. Go to the developer's website and download the drivers, which are sealed in the archive, and not laid out in a separate exe file.
We unpack the files to a USB flash drive.
We start the Windows installation. At the stage of choosing a volume, click on the "Load drivers" button.

A new window will open. Click the "Browse" button and specify the path to the drivers. Click "Ok" and "Next".

We try again to select a volume for installing the system.

Method number 3. If the error is related to the GPT or MBR format

If during the installation of Windows 7, 8 or 10 you get the error “Windows cannot be installed on this disk. The selected disk has a GPT partition style ”, you should change the GPT format to MBR. To do this, we perform the following actions.

We save all data from the C drive, as it will be formatted. It also doesn’t hurt to save information from the local drive D.
We open command line with administrator rights and enter the following commands in order:

diskpart;
list disk;
select disk № (indicate the number of the disk on which you will install Windows and with which problems arise);
clean (the entire disk will be cleaned);
convert mbr (format changed);
exit.

After formatting the partition, it is worth restarting the PC and trying to install the OS again.

You can also perform the same steps more in a simple way... In the BIOS in the "Boot" section in the "UEFI / Legasy Boot" item and set Enabled, and in " Secure Boot"- Disabled. After that, we delete all sections and create new ones. The format will be automatically changed.

SoftikBox.com

Windows cannot be installed on this disc. Check BIOS setup

Comments on record: 4

Hello everybody! When installing Windows on a laptop, I got an error: Windows cannot be installed on this disk. Your computer's hardware may not support booting from this disc. Make sure the controller for this disk is enabled in the BIOS menu of your computer.

I read it on the Internet, someone says that you need to switch from achi to ide. Switched over - did not help. I looked at the bios settings, well, in the laptop it is so simple that there is almost nothing to choose at all ... Resetting Bios did not help ... Then I inserted the Windows disk back and pressed the system restore during installation (this is where the install button is). I chose a team building. By the way, you can run it with Shift + F10.

We write bootrec / fixboot. Then we try to install. It helped me.

The fact is that Windows could not find the bootloader and did not understand what to do. This is how the error is solved, installing windows on this disk is impossible.

AlexZsoft.ru

Windows cannot be installed on this disc.

At reinstalling Windows 7 laptop has unexpected problems - BIOS and windows installer saw the hard disk, it was allowed to mark it, add / delete partitions, but then it did not go further, giving out a strange-looking message:

Windows cannot be installed on this disc. Your computer's hardware may not support booting from this disc. Make sure the controller for this drive is enabled in the BIOS menu of your computer.

Why is it strange? In general, support for the AHCI (Advanced Host Controller Interface) mechanism has been announced starting from Windows Vista and installation disk with Windows 7 licensed.

Well, God bless him, you can look for the guilty for a long time and persistently, but it's easier to get into the BIOS and switch AHCI Mode Control c to. Then it will be possible to disable Native AHCI Mode. Subsequently, you can return the settings back by installing the system and all drivers.

If you find the article useful, do not be lazy to like and share with your friends.

mdex-nn.ru

Windows cannot be installed on this disk (solution) - Programming, administration, IT

Windows cannot be installed on this disc (solution)

This manual details what to do if during Windows installation you are told that it is impossible to install Windows on a disk partition, and in detail - “Windows cannot be installed on this disk. The computer hardware may not support booting from this disc. Make sure the controller for this drive is enabled in the BIOS menu of your computer. "

Correcting the error "Installation on this disk is not possible" using BIOS settings (UEFI)

Most often, this error occurs when installing Windows 7 on old computers with BIOS and Legacy boot, in cases when the BIOS in the parameters of the SATA devices (i.e. hard disk) enabled AHCI mode (or any RAID, SCSI modes ).

But even if you don't have an “old” computer or laptop, this option can also work. If you are installing Windows 10 or 8, then instead of enabling IDE mode, I recommend:

Enable EFI Boot in UEFI (if supported).
Boot from the installation drive (flash drive) and try the installation.

Why this is happening, I myself did not fully understand (after all, the AHCI drivers are included in the images of Windows 7 and higher). Moreover, I was able to reproduce the error for installing Windows 10 (the screenshots are just from there) - simply by changing the disk controller from IDE to SCSI for the "first generation" Hyper-V virtual machine (ie with BIOS).

Third-party disk controller drivers AHCI, SCSI, RAID

In some cases, the problem is caused by the specificity of the user's equipment. The most common options are laptop caching SSDs, multi-disk configurations, RAID arrays, and SCSI cards.

Why does this error occur and how to fix it?

Ways to solve the problem

The following factors can be the cause of this error:

Incorrect settings of SATA parameters;
Hardware specifics (availability of additional SSD and SCSI cards).

Method number 1. Via BIOS settings

To fix this error, it is worth booting into the BIOS and setting the IDE hard drive mode. To do this, do the following:

Reboot the PC and press "F8" several times to get into the BIOS.
Find the section "Advanced" or "Integrated Peripherals" and select the item "SATA Mode" or "SATA Raid", "Configuration SATA" (the path to the settings depends on the motherboard model). We change the mode of work with AHCI or another on the IDE.

We press "F10" and restart the PC. We repeat the installation of the system.

If your PC has a new BIOS firmware, then instead of IDE mode, you should enable EFI boot. To do this, do the following:

Boot into BOIS-UEFI and go to the "Boot" section. We find the item "UEFI / Legasy Boot" and set "Enabled".

We save the changes and restart the PC.

It should be noted that with this change, it is possible that a new error will appear, which is associated with the MBR or GTP partitions.

If your PC or laptop has an additional cached SSD or other storage device, it may be the cause of the problem. To fix the problem, follow these steps:

We determine the model and version of the device. Go to the developer's website and download the drivers, which are sealed in the archive, and not laid out in a separate exe file.
We unpack the files to a USB flash drive.
We start the Windows installation. At the stage of choosing a volume, click on the "Load drivers" button.

A new window will open. Click the "Browse" button and specify the path to the drivers. Click "Ok" and "Next".

We try again to select a volume for installing the system.

Method number 3. If the error is related to the GPT or MBR format

We save all data from the C drive, as it will be formatted. It also doesn’t hurt to save information from the local drive D.
Open the command line with administrator rights and enter the following commands in order:

diskpart;
list disk;
select disk № (indicate the number of the disk on which you will install Windows and with which problems arise);
clean (the entire disk will be cleaned);
convert mbr (format changed);
exit.

After formatting the partition, it is worth restarting the PC and trying to install the OS again.

You can also perform the same steps in an easier way. In the BIOS in the "Boot" section in the "UEFI / Legasy Boot" item and set Enabled, and in "Secure Boot" - Disabled. After that, we delete all sections and create new ones. The format will be automatically changed.

The problem described in the title can sometimes be encountered during the installation of Windows from an optical disc or flash drive. Often, this error appears when installing Windows 7, especially if the hard drive was recently replaced.

A window with such a formidable message appears on the screen at the stage of selecting the appropriate HDD partition for installing the operating system. Full text this warning looks like this:

The solution to this problem is quite simple, however, detailed instructions will definitely not be superfluous, especially for inexperienced PC users. So, the algorithm of actions is as follows:

Restart your computer and go to the BIOS menu.

How to get there depends on the version of the BIOS itself, it is either the Del button, or F8, F10 or F11. In any case, the required key will be indicated in the second window that appears after turning on the PC.

Go to the "Advanced" section and find the item "AHCI Mode Control" there.

Switch this mode from "Auto" to "Manual".

You can now disable Native AHCI Match by making it Disable. This is required to eliminate the error and normal OS installation.

Once you have installed the operating system and drivers required for it to function properly, you can revert the BIOS settings back.

That's all, now you know how to solve the problem "Make sure that the controller of this disk is enabled in the BIOS menu of the computer."

Tell your friends in social networks

CompDude.ru

SATA controller. How to enable SATA controller in BIOS?

What is a SATA controller?

Serial Advanced Technology Attachment is a technology that allows storage devices such as hard disk drives and optical cables to communicate over a high-speed cable to the motherboard. It is best to use the connector with the smallest number. SATA0 or SATA1 are considered ideal. For optical drives it is possible to use other ports.

When working with hard drives, you must initially use SATA0. It is installed on the system media. Each subsequent one must have one more digit, and so on. If there are multiple hard drives and RAID mode is used to increase storage space, one wire is connected to the connector and then the rest is routed to the controller.

Modes of operation

The controllers determine how the hard drive will communicate with the motherboard. There can be three principles of interaction in total:

SATA IDE controller operating mode. The easiest option. With it, the hard drive functions as IDE or PATA. In this case, it has limited potential, and also does not differ in speed of work. But this mode is very valuable if you need to ensure interoperability with equipment that is already out of date. It can also be used in cases where the computer has only one hard disk and you do not need to apply various functions of the drives.
SATA AHCI controller operating mode. In this case, it becomes possible to use the advanced functions of the drives. Examples include Native Command Queuing and hot plugging. Also a significant advantage is the high speed of interaction (when compared with the previous version).
RAID controller operating mode. With this setup, multiple separate hard drives can be configured to create a single storage array. It is distinguished by redundancy of information, as well as higher speed. The first is achieved by creating a hard drive backup, and the second is achieved by layering the disk space. When this mode works, then AHCI also functions with it.

Notes (edit)

Causes of malfunctions

Let's say the PC stopped working with the hard drive. This malfunction can have several reasons:

Cables are loose.
The hard drive is out of order.
The SATA controller does not work or slows down.

In the first option, it is necessary to check the tightness of the cable. In the second, most likely, you need to replace the device. And in the third - set the correct settings. Administrator rights are required for such changes. If they are, then you can proceed to solving the problem.

How to enable the SATA controller in the BIOS of a computer?

After the login is successful, you need to find the Integrated Peripherals item. If it is not there, then any one that is consonant in meaning will do. It contains all the parameters that relate to the internal capabilities of the motherboard. Now you need to find the Onboard SATA Controller. If not, just look for any entry that says "SATA controller". This parameter can only be set to Disabled and Enabled (respectively disabled and enabled). It must be ensured that it is activated.

AHCI connection

In general, here's how to switch the SATA controller to AHCI mode or whatever is needed. In this case, it is important to follow the instructions exactly so as not to touch anything unnecessary. Now let's take a look at two options that can come in handy when setting up your computer. Moreover, the main topic of the article has already been disclosed, and now we will deepen our knowledge.

SATA Controller Mode

This option is used to specify the operating mode. We have already discussed this. Now let's pay attention to how and what works in this case. If you set the IDE mode, then there will be no need to use additional drivers when working with equipment that uses this technology. The RAID mode is compatible with all operating systems starting from Windows 2000. The only peculiarity is that you will need outdated media for drivers (if the equipment is the same year of release as the operating system). Otherwise, their role can be successfully performed by a Flash drive or CD. But it makes sense to talk about creating a RAID array only if there are at least two hard drives. The same brand and volume will positively influence their work. And if the parties and firmware coincide, these are the ideal conditions for using this mode.

ANSI is a newer technology and is not compatible with (relatively) old systems. Due to the fact that this mode has a positive effect on the speed of technology, it is recommended to stop at it. Moreover, if RAID and ANSI can still be launched on representatives of operating systems and computers starting from the 2000 generation, they will not help with Windows 9x: there are simply no drivers that would combine the work of software and hardware. Please note that changes must be made even before the OS is installed. If you change the mode when the operating system is already installed, you can find a "blue screen of death" on your computer, which will display information about an error and the impossibility of correct operation. If you don't want to see him and demolish the OS, then you should forcibly change the controller driver to one that will work with the new settings.

The history of development

The first of the family of controllers is considered to be SATA 150. It is an interface that uses a serial data bus. Operates at a frequency of 1.5 GHz, thus providing a bandwidth of 150 megabytes per second. The standard has spread due to a number of advantages that previous designs did not have. Thus, the architectural advantages of the bus, the small size of the connectors and cable, the ease of use and the overall reliability of the connection played a role. Also, when two devices are connected to the same port, there are no conflicts and no problems.

The second generation SATA 300 delivers 300 Megabytes per second. In theory, both options are compatible, but problems are possible. But, in fairness, it is worth saying that even the most modern hard drives have not yet learned to operate faster than 130 megabytes per second, so there is no particular sense in chasing numbers in this case. So there is no difference when using controller types. The only thing that matters is what is connected first.

Conclusion

fb.ru

The disk controller is enabled in the computer BIOS menu

During the installation of the Windows 10 operating system, various errors may occur. As a rule, they are associated with incorrect BIOS settings or incorrect operation of computer or laptop components. One of the most common mistakes sounds like this: “Windows cannot be installed on this disk. Your computer's hardware may not support booting from this disc. Make sure the controller for this drive is enabled in the BIOS menu of your computer. " Yes, there are troubles when the disk is really cut off and no longer works. But more often than not, the reason is different.

On more modern motherboards with UEFI instead of the regular BIOS, switching to Legacy mode may help.

If none of these manipulations helps, then return everything as it was. The reason is most likely different.

Sometimes the error "Make sure that the controller of this disk is enabled in the BIOS menu of the computer" may appear because the boot record of the hard disk is crooked and needs to be restored. To do this, when starting the installation of the Windows 10 operating system, click on the "System Restore" button and go to the "Diagnostics" >> "Advanced options" >> "Command Prompt" menu, or simply press the Shift + F10 key combination. A black Windows console window will appear:

In turn, we type the commands:

Bootrec / fixmbr bootrec / fixboot bootrec / RebuildBcd

Each of them should complete successfully. After that, we restart the PC and try to start the installation again. Usually, this error of the disk controller in the bios menu of the computer is solved and then everything goes on without any problems.

set-os.ru

Make sure the controller for this drive is enabled in the computer BIOS menu. Solved. | Blog of a good person. good4el.ru

Question. Windows cannot be installed on this disc. Your computer's hardware may not support booting from this disc. Make sure the controller for this drive is enabled in the BIOS menu of your computer. Resolved

The error was issued when installing win7, XP was no problem. I got to google (there is one shit on the sites on this issue) I found a similar answer, having finished the article.

And so we put Windows 7 on Samsung r530, the error "Make sure that the controller of this disk is enabled in the BIOS menu of the computer" pops up.

Answer: The main reason for this error is BIOS setup.

1) Go to BIOS (F2 or DEl)

2) We are looking for the Advanced tab

3) Select and set the value of AHCI Mode Control to

immediately change Native AHCI Mode to

4) Save, restart and install windows.

How I installed an SSD drive on an old computer

I have already mentioned in my articles more than once about SSD disk x, said that they are faster than usual and with their help you can upgrade your computer. And it would seem that installing them is a trivial thing, which could be easier, you take off your old hard drive, put a new SSD, install Windows on it and rejoice, but in reality everything is not so simple. The fact is that in order to squeeze out maximum speed from an SSD disk (otherwise why use it), you need to switch to AHCI (Advanced Host Controller Interface) mode in BIOS. And here surprises can begin ...

So I have old computer, who decided to upgrade and install an SSD drive. In BIOS I switched the AHCI mode. To do this, I went into the BIOS (press the Del or F2 button (there may be other keys depending on the motherboard model), when you turn on the computer) in the "Main" menu, I selected "Sata Configuration".

And in "Configure Sata as" I chose "AHCI"

Saved the settings, rebooted the computer, and started installing Windows. But it was not there, an error occurred:

I started changing the BIOS settings, even updated its version, the result was one - this error constantly appeared. As a result, I decided to select IDE mode in BIOS and install Windows. The installation was successful, then I decided to try switching back to AHCI mode in BIOS, but this trick failed and Windows simply did not boot (in principle, I expected a similar result). Then I decided to do this - switch back to IDE mode, go to Windows and change the mode to ACHI in the registry editor.

After returning to IDE mode, Windows booted successfully, now you need to make changes in the registry. To do this, open the registry editor - press the key combination "Win" + "R" and enter regedit.

In the registry editor, go to the path "HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Services \ Msahci", find the "Start" parameter, open it double click... Enter "0" in the Value field.

Everything, the system can be rebooted and set the AHCI mode in the BIOS. As a result, everything worked, the SSD disk worked in ACHI mode. Windows successfully booted and worked many times faster than with a regular hard disk.

So, if your old computer has ceased to please you with its speed work - installation An SSD drive is, in my opinion, the ideal solution. But do not forget about the minimum size. random access memory- 2GB well, and a processor, preferably 2 cores, at least 2 GHz each.

I hope this article helped you avoid the error:

Windows cannot be installed on this disc. The hardware of this computer may not support booting from this disc. Make sure the controller for this drive is enabled in the BIOS menu of your computer.

And it helped upgrade your computer and improve its performance and performance.

Categories

Popular