Formatting a transcend 32 gb flash drive. Recovering a Transcend flash drive. Saving information and finding the right software
Various problems with USB drives or flash drives - this is what, probably, every owner of them faces. The computer does not see the USB flash drive, files are not deleted or written, Windows writes that the disk is write-protected, the amount of memory is incorrectly displayed - this is not a complete list of such problems. Perhaps, if the computer simply does not detect the drive, this guide will also help you: (3 ways to solve the problem). If the flash drive is detected and works, but it is necessary to recover files from it, first I recommend that you familiarize yourself with the material.
If different ways fix USB storage errors by manipulating the drivers, using Disk Management in Windows or using command line(diskpart, format, etc.) did not lead to a positive result, you can try utilities and programs for repairing flash drives provided by manufacturers, for example, Kingston, Silicon power and Transcend and third-party developers.
On the official website of Silicon Power in the "Support" section, there is a program for repairing flash drives of this manufacturer - USB Flash Drive Recovery. To download, you will need to enter the address Email(not checked), then the UFD_Recover_Tool ZIP archive is downloaded, which contains the SP Recovery Utility (requires .NET Framework 3.5 components for operation, will be loaded automatically if necessary).
Likewise previous program, for SP work Flash Drive Recovery requires an Internet connection and restoration of work occurs in several stages - determining the parameters of the USB drive, downloading and unpacking the appropriate utility for it, then - automatic execution necessary actions.
Download repair program flash drives Silicon Power SP Flash Drive Recovery Software is available for free from the official website http://www.silicon-power.com/web/download-USBrecovery
If you own the drive Kingston datatraveler HyperX 3.0, then on the official Kingston website you can find a utility for repairing this line of flash drives, which will help format the drive and bring it to the state it had when it was purchased.
You can download Kingston Format Utility for free from https://www.kingston.com/ru/support/technical/downloads/111247
ADATA USB Flash Drive Online Recovery
The manufacturer Adata also has its own utility that will help fix flash drive errors if you cannot read the contents of the flash drive, Windows reports that the drive is not formatted, or you see other errors related to the drive. To download the program, you will need to enter serial number flash drives (to load exactly what is required) as in the screenshot below.
After downloading - run the downloaded utility and follow a few simple steps to restore USB operation devices.
The official page where you can download ADATA USB Flash Drive Online Recovery and read about using the program - http://www.adata.com/ru/ss/usbdiy/
Apacer Repair Utility, Apacer Flash Drive Repair Tool
Several programs are available for Apacer flash drives at once - different versions Apacer Repair Utility (which, however, cannot be found on the official website), as well as Apacer Flash Drive Repair Tool available for download on the official pages of some of the Apacer flash drives (search the official website specifically for your USB drive model and look at the downloads section at the bottom of the page).
Apparently, the program performs one of two actions - simple formatting of the drive (Format item) or low-level formatting (Restore item).
Formatter Silicon Power
Formatter Silicon Power - Free Utility low-level formatting flash drives, which, according to reviews (including in the comments to the current article), works for many other drives (but use it at your own peril and risk), allowing you to restore their performance when no other methods help.
The utility is no longer available on the official SP website, so you will have to use Google to download it (I do not give links to unofficial locations within this site) and do not forget to check the downloaded file, for example, on VirusTotal before launching it.
SD Memory Card Formatter for repairing and formatting SD, SDHC and SDXC memory cards (including Micro SD)
The SD Memory Card Manufacturers Association (SDCA) offers its own universal utility to format the appropriate memory cards when problems arise with them. Moreover, judging by the available information, it is compatible with almost all such drives.
The program itself is available in versions for Windows (there is support for Windows 10) and MacOS and is quite easy to use (but you need a card reader).
You can download SD Memory Card Formatter from the official website https://www.sdcard.org/downloads/formatter/
D-Soft Flash Doctor
The free D-Soft Flash Doctor program is not tied to any specific manufacturer and, judging by the reviews, can help fix problems with a flash drive through low-level formatting.
In addition, the program allows you to create an image of a flash drive for subsequent work not on a physical drive (in order to avoid further malfunctions) - this can be useful if you need to get data from a Flash disk. Unfortunately, the official site of the utility could not be found, but it is available on many resources with free programs.
How to find a program to repair a USB flash drive
In fact of this kind free utilities there are much more to repair flash drives than are listed here: I tried to take into account only relatively "universal" tools for USB drives different manufacturers.
It is possible that none of the above utilities are suitable for restoring your USB drive to work. In this case, you can use the following steps to find the program you want.
Additionally: if all the described methods are repaired USB stick didn't help, try it.
Today it is impossible to imagine a more convenient tool for efficiently saving information than a USB flash drive. For many reasons, the main of which is still the technical imperfection of Flash drives, a convenient in all respects storage device in the form of a key fob can still fail. Restoring the Transcend flash drive will become the topic of our story. However, the algorithm of electronic “reincarnation” given below is also effective for miniature “repositories” of other brands.
Introduction: interesting theory
Before restoring a Transcend flash drive, you need to understand what we generally have to deal with. Knowing the technical side of the device will make the overall troubleshooting process incredibly easy. However, we will not delve into technical subtleties and hammer our heads with various technological terms. We just need to understand the main thing - what a miniature drive consists of.
How a flash drive works: an inside look
- Typically, the NAND FLASH chip occupies the most space on the board. Depending on the manufacturability of the finished product and its ability to memorize (nominal amount of stored data), a particular Flash Drive may have one or more of these elements. If you will be restoring a Transcend 16 gb flash drive, you should know, most likely, there are two such NAND chips. It is worth noting that there are three main types of negotiated memory: SLC, MLC, and TLC.
- The second most important detail is the controller. For different manufacturers, such a component may differ from their own kind, both in terms of standard and software characteristics. This microcircuit performs several functions: it converts the supply voltage, controls LED indicator(if any) and carries out the process of exchanging information with the host computer. The controller also contains a special memory area in which the firmware is located - this is the microprogram, with the help of which the general interaction with all internal components of the Flash-carrier takes place.
- The board also contains SMD elements and a quartz resonator.
After a while, you will understand how much the above information will make it easier for you to recover a Transcend flash drive.
Determine the cause of the malfunction
As practice shows, the main source that causes the inoperability of a Flash-Drive device is a banal software glitch, the main "symptoms" of which are:
- The storage device is not visible to the computer at all when inserted into the USB connector, but responds to the introduction with a beep.
- The operating system determines only part disk space removable media.
- The flash drive is recognized by the computer OS, but does not "want" to work with it.
Even if you did not violate the operating rules, and some of us (users) unknowingly abuse the way to "skip" to remove the USB flash drive from the PC, there are still cases when a miniature memory device partially or completely fails due to for us reasons. And yet it would be somewhat rash on our part to discount the likelihood of mechanical damage, but more on that later ...
Step one: comprehensive action analysis
Do not rush to search for utilities to recover Transcend flash drives. Perhaps your computer is faulty, or the reason for the inoperability of removable media lies in one of the "whims" of the PC:
- Check if the "problematic" drive is working on another computer.
- Disconnect all peripherals from your PC.
- Connect the Flash Drive to one of the main system USB connectors ( rear part block).
- Go to the system event log and make sure that there are conflicts with drivers. recent times did not have. Otherwise, the "crashed" software should be reinstalled.
- Clean the system from traces of previously connected Flash devices (the USBOblivion utility will help you).
If the above did not help, and the carrier still "does not want" to work fully, proceed to the next part of the article.
Step two: check the physical integrity of the Flash-Drive device
Hardware recovery of a Transcend flash drive is not always a difficult process (in terms of its implementation):
- Examine the "non-working" flash drive from all sides.
- Chips, deep scratches should alert you.
- Look inside the USB connector - it is possible that one of the contacts is bent or dangles altogether, closing the adjacent connector.
In the event that you hear that something has fallen off inside the case, or a visual inspection requires a deeper analysis, carefully dismantle the case frame of the Flash drive. Inspect the integrity of the internal soldering, especially where the metal part of the USB connector touches the main electronic board.
Step three: diagnose the storage device and collect data about the removable storage
Correct recovery of a Transcend 8gb flash drive (including a different size rating) is possible only when the user knows the exact information about his model.
Namely:
- What type of memory is installed on the Flash-Drive device (its unique ID).
- What kind of controller the removable media is equipped with (manufacturer, model ID and firmware version).
You can find out all this data by running the ChipGenius utility on your PC, which you can easily find on the network, after which all you have to do is download the restore agent you need and return the USB flash drive to "digital life".
Step four: the immediate process of restoring the Flash-Drive device
In most cases, the JetFlash Online Recovery utility will help. Download it latest version and run it on your computer. By the way, in the process of using this software a permanent internet connection is required.
So, as soon as the utility for restoring the Transcend flash drive is launched, and your faulty removable drive is inserted into the USB port, press the rightmost button "Yes" and wait while the program performs all the "resuscitation" actions.
At the end of the repair process, remove the drive from the connector and reconnect the USB flash drive.
It is highly likely that your Flash-Drive will become functional again.
Finally
As you can see, nothing is impossible! Everything is not as difficult as you may have thought before. The only thing to beware of is haste and rash actions. Do not doubt your own abilities, be sure - and you will succeed!
Imagine modern man it is quite difficult without a digital storage device. Flash drive at the moment is a successful portable object that stores a lot of useful information.
The advantage of a flash drive is that it does not take up much space and is accompanied by increased practicality. Even when dropped, it is not always damaged, as it was previously with disks.
Another advantage is that record the desired content on it not only is it faster, but much easier.
Unfortunately, despite its unique practicality, it can happen that the flash drive stops functioning at some point.
Of course, you can peacefully "say goodbye" to a dead flash drive, go to the store, where you can buy a new digital drive.
If you find it difficult to get rid of your usual storage medium so easily, then we recommend that you study the recommendations on how to restore a "dead" Transcend flash drive.
Recovery process
Before making small repairs to the damaged Transcend flash drive, it is important to establish the reason why it failed.
Such a diagnosis can be compared with the treatment of a patient. The doctor also initially examines the patient, establishes a diagnosis, identifies the cause of the pathology, and only after that prescribes treatment.
We also recommend that you "treat" your affected digital media. This will help quite effectively the program for recovering a USB flash drive Transcend, which can be easily downloaded using the offers on the network.
However, it is still useful initially to establish the cause of the failure, because of which you have to "scoop" the recommendation information.
Reasons for failure
In most cases, you have to consider restoring a Transcend flash drive due to a banal software failure that users have to deal with quite often.
Some tricks allow us to assert that, indeed, a software failure presented such an unpleasant surprise.
Insert your drive into the USB port and watch what happens next. If all your attempts to open the media are in vain, but the computer will see the Transend flash drive, then it is likely that it has undergone a software failure.
You can suspect the same if you hear a characteristic sound signal, but no visible changes will appear on the screen, including you will not find your media when you start the "Computer" window.
Also, a software failure is indicated by a factor when the PC sees a USB flash drive, but not all, but only a part of its disk space.
Of course, if you find confirming "symptoms" of a software failure, as a result of which you need to restore the Transend flash drive, you do not need to despair, feverishly remember what could be the reason for such a nuisance.
Of course, you could also provoke the failure of a digital media if you neglected the recommendations on how to properly remove the drive from the USB connector.
A fall of the device, strong mechanical squeezing may serve as a reason for failure. There are also possible reasons that are completely independent of the user's actions.
Eliminating the problem
Those who have become firmly convinced that the drive has stopped responding to any actions want to find a program for recovering a flash drive.
Indeed, a utility for recovering a Transcend flash drive exists, it is not so difficult to find, download and install on a computer.
One of the programs for recovering a flash drive
However, initially it is important to make sure that the digital storage device is "dead". Sometimes it happens that it does not respond on one PC, but functions perfectly on another computer equipment.
A software failure is often found on the PC itself, when, for example, the drivers "flew".
You can also try disconnecting all peripherals, and connect only a USB flash drive. Even such a simple move sometimes makes it easy to fix the problem.
If all the attempts that have been made are in vain, we recommend that you inspect your digital drive from all sides. It is useful to pay attention to all chips, cracks that you find on the case.
It will not be superfluous to look inside the part that connects to the USB connector. Sometimes this visual examination is sufficient to detect poor internal contact.
Do not be afraid to carefully open the case of the carrier and inspect it for integrity inside. It is useful to carry out a thorough visual inspection of its internal contents.
You can also try to eliminate bad contact on your own, but only if you have special tools... If there are none, it is unlikely that you will be able to eliminate even the identified problems.
Only after you have made sure that mechanical damage is excluded, you can proceed to the next stage, after completing which it is possible to recover the digital medium.
Of course, in this case, you will definitely need a program to restore the Transend flash drive.
For the correct recovery of a flash drive, it is important to first clarify the type of memory installed on the media, its ID, firmware version, controller ID and other technical details.
In this case, you cannot do without the help of the special utility Chip Genius. With such a utility, you will not only get information quickly, but it will be accurately presented without errors.
Based on the information received, you can start searching, the purpose of which is a program to restore your flash drive.
The ideal solution to the task you have indicated is not even recovery utility, and the JetFlash Online Recovery utility.
This option is suitable for those users who have a computer provided with a permanent and reliable internet access.
Do not even tune in to a time-consuming process, your expectations will be in vain. Immediately after starting such a service program, as well as connecting the digital "dead" drive to the USB connector, the "resuscitation" process will start automatically.
You just have to wait patiently for the process to complete. The only thing you have to do is click on the "Yes" button, confirming your readiness to grant the program itself the right to work with the flash drive.
After completing the work, the program will notify you about it. Now unplug the USB stick and then plug it back in. If the "resuscitation" process has been effective, you will find instantly that your digital drive is "alive". You can again copy, write and other functional user manipulations on it.
If the flash drive has not "come to life", you will have to say goodbye to it, and get yourself a new digital "assistant".
So, you were able to make sure that the process of recovering digital media is not difficult. However, such a process requires increased attention, responsibility for each step taken.