While using the application, the user is often faced with a "polite" window warning about the occurrence of this or that error. Such errors are also generated when trying to open a photo or send it to a friend. One of these errors is the message: "This photo item is no longer available on Viber." What's behind this message?

This photo element is no longer available on Viber: what is it?

There is usually a handler behind a lot of error messages that throws an exception, which indicates that the application cannot cope with the problem that has arisen. If a Viber user downloads photos from the Internet and tries to send a photo that has not yet been fully loaded, then Viber is forced to report that this photo not yet available to him. He does not have access to the photo, which is occupied by another process - the upload process.

Another illustration of this error can be a deleted photo. One day, a smartphone user launched Clean Master on his device to clear his memory of unnecessary (temporary, cached) files.

A conscientious master took and cleaned all files, including some photos, to which Viber had access. The cleaning took place in accordance with the settings and it is foolish to blame the wizard for carelessly deleting Viber files.

After the user started Viber again, he saw that in the place where they once were required files, Viber shows crossed out pictures. When trying to open such a picture, the user inevitably received a response about its inaccessibility.

This photo element is no longer available on Viber: possible solutions

As you can see, situations causing the error“This photo element is no longer available on Viber,” enough. At the same time, the level of complexity for solving such situations is quite high.

To resolve the issue with the error on the situation with uploading photos on upload, obviously, you need to follow only a few steps:

• Wait until the photo is fully downloaded from the Internet.
• Go to the download folder on your mobile device.
• Copy downloaded images to the folder where custom Viber images are stored. This will allow Viber to access these images.
• Send the photos you are looking for to a friend.

In another situation, the solution would be to create a backup of Viber's data: contacts, files with which this application works, including photos. The backup is created in case of unforeseen situations, as happened to the user who launched Clean Master and accidentally deleted the files with which Viber was working. Careful handling of the program will prevent the appearance of errors like "This photo element is no longer available to Viber."

Surely many of you have encountered the error Failed to download the program. The program<Имя программы>failed to load at the moment... This error occurs either during the installation of the application from the App Store or during its update.

Moreover, the error is characterized by the fact that it is not clear by what algorithms it occurs. For example, I can update 50 programs, 47 will update normally, and three will show this message.

Cause: in most cases, this message means some kind of problem with the Internet or the store App Store.

What to do?

Step 1. The most obvious

Try clicking the "Again" button. There is a chance that the application will still load.

Step 2

Click the button Ready... The application will stop loading. Go to the App Store in the section Updates... And click on the button Refresh near the problematic application.

Perhaps the second time the update should be launched in a few minutes. If there are any communication problems at the moment, then you should wait.

Step 3

If the application hangs and clearly does not want to be updated, you can uninstall it and re-download it from the App Store. I do not recommend doing this if the application contains any documents or it is a game, the save from which you do not want to lose.

Step 4

Step 5

And how a good option, can be considered a re-login in the App Store. In the Featured section, scroll to the bottom. In the lower left corner, poke on the button with your account. Click “Sign Out” (or Sign Out). Then again click on the button in the lower left corner. In the window that appears, enter your Apple ID and password.

Step 6

Radical but effective solution Problems - . Since most people have a non-static ip and will change after a reboot, this might help. Your ISP may be having some kind of connection problem.

Outcome:

If all else fails, but at the same time your applications have previously loaded and updated without problems, then this is some kind of problem either on the side of the provider or on the side of Apple. I recommend just waiting a few minutes / hours until the situation is resolved. At this time, you can try to update the application or download it again and see if the problem is gone.

In December 2012, an event occurred that many users Apple devices in Russia and the CIS countries were waiting impatiently -. However, law-abiding residents of Russia have already managed to create American accounts for themselves, which allowed them to buy music and other content not available in the Russian App Store.

This account required the binding of disposable virtual bank cards or purchases gift certificates as in US iTunes Store cards Russian banks were simply not supported.

With the advent of a full-fledged iTunes Store to Russia the need for American account disappears by itself. This instruction will help you change the country of your current Apple ID.

In addition to the obvious advantages, such as support for domestic bank cards, changing an account also has negative aspects:

1. You will need to spend all the money in your account and unsubscribe from iTunes Match.

2. If you change the store country, you will lose the ability to automatically update content purchased from the US Store. That is, you can go to the application page and click the update button, but the programs will not appear in the updates section.

3. You will not be able to download content (games, programs, etc.) to your device that is not available in the Russian iTunes Store.

4. When going to the Russian store, you will need to enter data bank card operating on the territory of Russia. As a last resort, they will do.

Now we go directly to the instruction itself:

"Resetting" the account

If you have an amount in your account that is a multiple of 99 cents, then you can simply buy applications. If the amount is less than 99 cents, then you will have to write a letter to support Apple.

To do this, you need to launch iTunes on your computer and select the item on the right "Support".

Then, in the window that opens, click on the button again "Support"... After that, the Apple page will open in the browser, where in the menu on the left you need to select the lowest item - Contact Support... Then click on the link "Contact iTunes Store support".

On the page that opens, select the item "Account Management", check the box "The topic is not listed" and in the field below, enter the subject of the request: debiting the balance on the account or canceling the iTunes Match subscription. After pressing the Enter key, a search for solutions will be made and after that the Email button will appear, which will need to be pressed.

Then a page will open where you will need to enter your personal data: first and last name, mail for communication and the mail that you use to enter your Apple ID. All data must match the data specified when registering an American account. On this page, you also need to indicate the reason for the request.

After clicking on "Continue" You will be given an individual application number, and a message will appear in the mail you indicated that your application is registered with iTunes support.

About a day later, a message will be sent to the mail with a notification about the deduction of funds from the account. After that, you can start changing the country in the store.

Unsubscribing from iTunes Match

If your American Apple ID was subscribed to the iTunes Match service, then you need to download the entire library to your computer from iCloud in advance and perform all the actions in the same way as when debiting funds. But specify as the subject: "disable iTunes Match subscribition". After that, a support employee will contact you and notify you that your content will be unavailable after canceling your subscription, and will offer you a refund for the remaining months of using the service. You must reply to this e-mail that you have downloaded all your songs and want to receive compensation.

Sample text: “Hello. I'm sure I want to cancel my iTunes Match subscribition and I want to receive a partial refund. "

Consideration of this application can take several weeks. Since the support is required to agree on a partial refund to your account. After receiving the letter, the money will go to your Apple ID within a week, after which they will need to be spent in full to change the country.

Change the country in the iTunes Store

Click on the Apple ID on the left and in the drop-down menu select the item "Account".

On this page we are looking for the item "Change Country or Region".

Choose from the list "Russia" and press the button "Change", then "Continue", then we agree with the rules of the iTunes Store and click the button "Accept"... After that, you need to enter your billing information. After that, you can safely use the Russian App and Music Store from Apple. In order to download a program already purchased in the US Store, on the page with the description of the program, you must click the "Buy" button, while the system will inform you that the update is free, since you already have previous version of this object. Wherein this program will not be displayed in the purchase history, therefore updates will not appear automatically.

--------

Nokia N91-1 certain circumstances one-time long Music player ".

A

1020e4fe.cre

P.S. I decided to write about the solution to this problem here, and not in the comments to the files, so that this decision did not get lost anywhere and went into the piggy bank of knowledge

DimonVideo DimonVideo

2010-02-28T11: 02: 49Z 2010-02-28T11: 02: 49Z

The object is not available. Restored std. key function

-
--------

For the 2nd time since using the good old Nokia N91-1 I ran into this seemingly small, but, nevertheless, very unpleasant problem - when certain circumstances the phone refuses to respond to one-time pressing the MM key (MultiMedia) while long pressing - launches Visual Radio. And only in the target application ( Music player ) the smartphone somehow responded: " The object is not available. Restored std. key function. ".

A certain circumstances served: for the first time - half-dead charging, which either charged the phone or not, and the second time - exactly the same state as charging, mini-usb cable. Moreover, what is interesting, in addition to the fact that the MM-key ceased to perform its function, so phantom files appeared on the device's hard drive:

Attention! You do not have permission to view hidden text.

And if with a solution last problems did not arise, but with the first question it was not so simple -. And I didn't really want to solve the issue of hard resetting the phone, as I did for the first time out of despair - you won’t deal with this disgrace every time: D

So I had to look for alternative ways. To begin with, I tried to use the program for reassigning keys, but I could not find what I needed in it. I decided to try it the way the author advises - again a mistake, Anykey.exe was not going to do what I expected from it. In the end, I came to this -, first, of course, unlocking the smartphone. But this did not give the desired result - well, if I try to force the phone to do what it already has, I don’t add anything new (I don’t need any extraneous programs on MM, I need a Music player ). But here - C: / private / 10202be9 / persists /- found a very interesting file called 1020e4fe.cre ... And curiosity played in me - having previously backed up it, so, just in case, deleted it from the disk. And ... Oh, a miracle! I didn't even have to restart the phone, as it responded to a single press of the multimedia key and showed the coveted Music Player. On this my torment was over and, having received satisfaction from the result, in spite of the heap of free time spent, I went to share a small but pleasant find exactly here.

After all, it happens I really hope that this small, but extremely useful note will help someone, and the comrade will not have to once again hard-reset your device;)

P.S. I decided to write about the solution to this problem here, and not in the comments to the files, so that this solution does not get lost anywhere and go into the piggy bank of knowledge ">

For novice developers of 1C 8.3, it is difficult to understand why they get an error so often - The object field is not available for 1C recording (WorkingDate, Code, Table, Number, Date, etc.)... Let's figure out why this error can appear, and how to deal with it.

If you have no idea what programming is, then it's best not to touch anything. Most likely, the programmers who modified your configuration just made an annoying mistake. Just call the specialist who worked with you. This error resolved quickly enough (if it does not entail other, more complex problems). If contacts with personal programmers are lost, you can contact our highly qualified professionals, details on the page -.

If the error occurs after update configuration 1C 8.2 or 8.3, most likely, You need to last current version.

Get 267 1C video tutorials for free:

If you are a beginner 1C programmer

Generally speaking, you are trying to program code change data that you do not have the right to change. Let's consider specific cases:

Change the object, not the link

The hit parade of the reasons for this error is headed by an attempt to assign new attributes to an element link. They usually do it like this:

Petrov = Reference books. Individuals. FindByDesign ("Petrov Ivan"); Petrov. PassportNumber = "2156363";

And at this moment, the newbie receives an error - the Object field is not available for recording 1C.

It should be understood: it is only possible to change the properties and attributes of an object. V this case the variable "Petrov" contains the so-called. "Link" - unique identificator in the database with which the system maintains uniqueness. And what is available to us "by point" (Petrov.NumberPassporta) is simply the convenience of the 1C enterprise, and in fact any "point" is another query to the database.

Correct solution to the problem:

PetrovLink = Reference books. Individuals. FindByName ("Petrov Ivan"); PetrovObject = PetrovLink. GetObject (); Petrov Object. PassportNumber = "2156363"; Petrov Object. Write ();

Trying to change system fields

The second most popular reason for this error is an attempt to change the details that cannot be changed.

• row number of the tabular section;
• using CurrentString instead of CurrentData;
• etc.